Elastic Load Balance
Elastic Load Balance

    Todos los resultados de "" dentro de este producto

      Todos los resultados de "" dentro de este producto

      • Descripción general del servicio
        • Qué es ELB
        • Ventajas del producto
        • Cómo funciona ELB
        • Escenarios de la aplicación
        • Differences Between Dedicated and Shared Load Balancers
          • Tipos de productos de ELB
          • Detalles de comparación de características
        • Equilibrio de carga en una red pública o privada
        • Rutas de tráfico de red
        • Especificaciones de los balanceadores de carga dedicados
        • Facturación (balanceadores de carga compartidos)
        • Permisos
        • Conceptos de producto
          • Conceptos básicos
          • Región y AZ
        • Cómo funciona ELB con otros servicios
      • Pasos iniciales
        • Descripción general
        • Preparaciones para el uso de ELB
        • Uso de balanceadores de carga compartidos (nivel de entrada)
        • Uso de balanceadores de carga compartidos (nivel avanzado)
      • Guía del usuario
        • Balanceador de carga
          • Descripción general
          • Preparativos para crear un balanceador de carga
          • Creación de un balanceador de carga dedicado
          • Creación de un balanceador de carga compartido
          • Habilitación del rendimiento garantizado para un balanceador de carga compartido
          • Configuración de la protección de modificación para balanceadores de carga
          • Modificación del ancho de banda
          • Cambio de las especificaciones de un balanceador de carga dedicado
          • Cambio del modo de facturación o de la opción de facturación de ancho de banda
          • Cambio de una dirección IP
          • Vinculación de una dirección IP a o desvinculación de una dirección IP de un balanceador de carga
          • Adición o extracción de un ancho de banda compartido IPv6
          • Exportación de la lista de balanceadores de carga
          • Eliminación de un balanceador de carga
        • Oyente
          • Descripción general
          • Protocolos y puertos
          • Adición de un oyente de TCP
          • Adición de un oyente de UDP
          • Adición de un oyente de HTTP
          • Adición de un oyente de HTTPS
          • Adición de un oyente UDP (con un grupo de servidores Backend QUIC asociado)
          • Configuración de la protección de modificación para un oyente
          • Configuración de duraciones de tiempo de espera
          • Modificación o eliminación de un oyente
          • Dirección IP del cliente de transferencia (balanceadores de carga dedicados)
          • Transferir la dirección IP del cliente (balanceadores de carga compartidos)
        • Características avanzadas de los oyentes de HTTP/HTTPS
          • Política de reenvío (balanceadores de carga compartidos)
          • Política de reenvío (balanceadores de carga dedicados)
          • Reenvío avanzado (balanceadores de carga dedicados)
            • Reenvío avanzado
            • Gestión de una política de reenvío avanzado
          • Autenticación mutua
          • HTTP/2
          • Redirección de HTTP a HTTPS
          • Transferencia del EIP del balanceador de carga a los servidores backend
          • Política de seguridad de TLS
          • Certificado de SNI (para oyentes de HTTPS)
        • Grupo de servidores backend
          • Descripción general
          • Características principales
            • Comprobación de estado
            • Algoritmos de balanceo de carga
            • Sesión adhesiva
            • Modo de reenvío (balanceadores de carga dedicados)
            • Inicio lento (balanceadores de carga dedicados)
          • Creación de un grupo de servidores backend (balanceadores de carga dedicados)
          • Creación de un grupo de servidores backend (balanceadores de carga compartidos)
          • Modificación de un grupo de servidores backend
            • Descripción general
            • Modificación de la configuración de comprobación de estado
            • Cambio del algoritmo de balanceo de carga
            • Modificación de la configuración de sesión adhesiva
            • Modificación de la configuración de inicio lento (balanceadores de carga dedicados)
          • Cambio de un grupo de servidores backend
          • Consulta de un grupo de servidores backend
          • Eliminación de un grupo de servidores backend
        • Servidor backend (balanceador de carga dedicado)
          • Descripción general
          • Reglas de grupos de seguridad
          • Gestión de servidores backend
            • Adición de servidores backend
            • Consulta de servidores backend
            • Extracción de servidores backend
            • Cambio de las ponderaciones/puertos del servidor backend
          • Direcciones IP como servidores backend
            • Descripción general
            • Habilitación de IP as a Backend
            • Adición de direcciones IP como servidores backend
            • Consulta de servidores backend
            • Extracción de servidores backend
            • Cambio de las ponderaciones/puertos del servidor backend
          • Interfaces de red suplementarias
            • Adición de interfaces de red suplementarias
            • Consulta de interfaces de red suplementarias.
            • Extracción de interfaces de red suplementarias
            • Cambio de las ponderaciones/puertos de las interfaces de red suplementarias
        • Servidor Backend (balanceadores de carga compartidos)
          • Descripción general
          • Reglas de grupos de seguridad
          • Gestión de servidores backend
            • Adición de servidores backend
            • Consulta de servidores backend
            • Extracción de servidores backend
            • Cambio de las ponderaciones del servidor backend
        • Certificado
          • Introducción a los certificados
          • Certificado y formato de clave privada
          • Conversión de formatos de certificado
          • Adición de un certificado
          • Eliminación de un certificado
          • Vinculación de un oyente y sustitución del certificado enlazado a un oyente
          • Reemplazar el certificado vinculado a diferentes oyentes
          • Consulta de oyentes por certificado
        • Control de acceso
          • Control de acceso
          • Gestión de grupos de direcciones IP
            • Creación de un grupo de direcciones IP
            • Consulta de los detalles de un grupo de direcciones IP
            • Gestión de direcciones IP en un grupo de direcciones IP
            • Eliminación de un grupo de direcciones IP
        • Etiqueta
        • Registro de acceso
        • Protección para las operaciones de misión críticas
        • Monitoreo
          • Métricas de monitoreo
          • Configuración de una regla de alarmas
            • Creación de una regla de alarma
            • Modificación de una regla de alarma
          • Consulta de Métricas
        • Auditoría
          • Operaciones de clave registradas por CTS
          • Consulta de trazas
        • Cuotas
        • Apéndice
          • Configuración del módulo TOA
      • Referencia de la API
        • Antes de comenzar
          • Descripción general
          • Invocación de la API
          • Endpoint
          • Notas y restricciones
          • Conceptos
          • Selección de una versión de API
          • Consulta de datos en páginas
        • Descripción de la API
        • Llamada a APIs
          • Hacer una solicitud de API
          • Autenticación
          • Respuesta
        • API del balanceador de carga dedicado
          • Versión de la API
            • Consulta de versiones de API
          • Cuota
            • Consulta de cuotas
            • Consulta de uso de cuotas
          • Zona de disponibilidad
            • Consulta de AZ
          • Variante de Equilibrador de Carga
            • Consulta de variantes
            • Consulta de detalles de una variante
          • Balanceador de carga
            • Creación de un balanceador de carga
            • Consulta de balanceadores de carga
            • Viewing Details of a Load Balancer
            • Actualización de un balanceador de carga
            • Eliminación de un balanceador de carga
            • Consulta del árbol de estado de un equilibrador de carga
          • Certificado
            • Creación de un certificado
            • Consulta de certificados
            • Consulta de detalles de un certificado
            • Actualización de un certificado
            • Supresión de un certificado
          • Política de seguridad
            • Creación de una política de seguridad personalizada
            • Consulta de políticas de seguridad personalizadas
            • Consulta de detalles de una política de seguridad personalizada
            • Actualización de una política de seguridad personalizada
            • Eliminación de una política de seguridad personalizada
            • Consulta de políticas de seguridad del sistema
          • Grupo de direcciones IP
            • Creación de un grupo de direcciones IP
            • Consulta de grupos de direcciones IP
            • Consulta de detalles de un grupo de direcciones IP
            • Actualización de un grupo de direcciones IP
            • Eliminación de un grupo de direcciones IP
            • Actualización de direcciones IP en un grupo de direcciones IP
            • Eliminación de direcciones IP de un grupo de direcciones IP
          • Oyente
            • Adición de un oyente
            • Consulta de oyentes
            • Consulta de detalles de un listener
            • Actualización de un oyente
            • Eliminación de un oyente
          • Grupo de servidores de backend
            • Creación de un grupo de servidores backend
            • Consulta de grupos de servidores backend
            • Consulta de detalles de un grupo de servidores backend
            • Actualización de un grupo de servidores backend
            • Eliminación de un grupo de servidores backend
          • Servidor de backend
            • Adición de un servidor backend
            • Consulta de servidores backend
            • Ver detalles de un servidor backend
            • Actualización de un servidor backend
            • Eliminación de servidores backend
          • Comprobación de estado
            • Configuración de una comprobación de estado
            • Consulta de comprobaciones de estado
            • Consulta de detalles de una comprobación de estado
            • Actualización de una comprobación de estado
            • Eliminación de una comprobación de estado
          • Política de reenvío
            • Adición de una política de reenvío
            • Consulta de políticas de reenvío
            • Consulta de detalles de una política de reenvío
            • Actualización de una política de reenvío
            • Eliminación de una política de reenvío
          • Regla de reenvío
            • Adición de una regla de reenvío
            • Consulta de reglas de reenvío
            • Consulta de detalles de una regla de reenvío
            • Actualización de una regla de reenvío
            • Supresión de una regla de reenvío
        • API de Balanceador de carga compartido
          • Balanceador de carga
            • Creación de un balanceador de carga
            • Consulta de los balanceadores de carga
            • Consulta de detalles de un balanceador de carga
            • Consulta del árbol de estado de un balanceador de carga
            • Actualización de un balanceador de carga
            • Supresión de un balanceador de carga
          • Oyente
            • Adición de un oyente
            • Consulta de detalles de un oyente
            • Consulta de oyentes
            • Actualización de un oyente
            • Eliminación de un oyente
          • Grupo de servidores de backend
            • Adición de un grupo de servidores de backend
            • Consulta de grupos de servidores backend
            • Consulta de detalles de un grupo de servidores backend
            • Actualización de un grupo de servidores backend
            • Eliminación de un grupo de servidores backend
          • Servidor de backend
            • Adición de un servidor backend
            • Consulta de servidores backend
            • Consulta de detalles de un servidor backend
            • Actualización de un servidor backend
            • Eliminación de un servidor backend
          • Comprobación de estado
            • Configuración de una comprobación de estado
            • Consulta de comprobaciones de estado
            • Consulta de detalles de comprobación de estado
            • Actualización de un chequeo de estado
            • Eliminación de una comprobación de estado
          • Política de reenvío
            • Adición de una política de reenvío
            • Consulta de políticas de reenvío
            • Consulta de detalles de una política de reenvío
            • Actualización de una política de reenvío
            • Eliminación de una política de reenvío
          • Regla de reenvío
            • Adición de una regla de reenvío
            • Consulta de reglas de reenvío
            • Consulta de detalles de una regla de reenvío
            • Actualización de una regla de reenvío
            • Supresión de una regla de reenvío
          • Lista de confianza
            • Adición de una lista blanca
            • Consulta de detalles de una lista blanca
            • Consulta de listas blancas
            • Actualización de una lista blanca
            • Eliminación de una lista blanca
          • Certificado
            • Creación de un certificado
            • Consulta de certificados
            • Consulta de detalles de un certificado
            • Actualización de un certificado
            • Supresión de un certificado
        • API (API de OpenStack)
          • Etiqueta
            • Adición de una etiqueta a un balanceador de carga
            • Adición o eliminación de etiquetas de balanceador de carga por lotes
            • Consulta de todas las etiquetas de un balanceador de carga
            • Consulta de las etiquetas de todos los balanceadores de carga
            • Consulta de balanceadores de carga por etiqueta
            • Eliminación de una etiqueta de un balanceador de carga
            • Adición de una etiqueta a un oyente
            • Adición o eliminación de etiquetas de oyente por lotes
            • Consulta de todas las etiquetas de un oyente
            • Consulta de las etiquetas de todos los oyentes
            • Consulta de oyentes por etiqueta
            • Eliminación de una etiqueta de un oyente
            • Códigos de estado
        • Ejemplos
          • Creación de un balanceador de carga dedicado y vinculación de un nuevo EIP a él
          • Adición de un oyente a un balanceador de carga dedicado
          • Eliminación de un balanceador de carga dedicado
          • Creación de un balanceador de carga de red pública (compartido)
          • Consultar el ID de un ECS utilizado como servidor backend
        • Políticas de permisos y acciones admitidas
          • Introducción
          • Acciones admitidas
            • Balanceador de carga
            • Oyente
            • Grupo de servidores de backend
            • Servidor de backend
            • Comprobación de estado
            • Política de reenvío
            • Regla de reenvío
            • Whitelist
            • SSL Certificate
            • Cuota
            • Etiqueta
            • Precauciones para los permisos de API
        • Apéndice
          • Códigos de error
          • Códigos de estado
          • Métricas de monitoreo
          • Información general sobre los balanceadores de carga compartidos
            • Consulta de datos en páginas
            • Resultados de la consulta de secuenciación
            • Flujo de trabajo básico
          • Obtención de un ID de proyecto
        • API históricas
          • API de balanceador de carga mejorado compartido (OpenStack)
            • Balanceador de carga
              • Creación de un balanceador de carga
              • Consulta de los balanceadores de carga
              • Consulta de detalles de un balanceador de carga
              • Consulta del árbol de estado de un balanceador de carga
              • Actualización de un balanceador de carga
              • Supresión de un balanceador de carga
            • Oyente
              • Adición de un oyente
              • Consulta de oyentes
              • Consulta de detalles de un oyente
              • Actualización de un oyente
              • Eliminación de un oyente
            • Grupo de servidores de backend
              • Adición de un grupo de servidores de backend
              • Consulta de grupos de servidores backend
              • Consulta de detalles de un grupo de servidores backend
              • Actualización de un grupo de servidores backend
              • Eliminación de un grupo de servidores backend
            • Servidor de backend
              • Adición de un servidor backend
              • Consulta de servidores backend
              • Consulta de detalles de un servidor backend
              • Actualización de un servidor backend
              • Eliminación de un servidor backend
            • Comprobación de estado
              • Configuring a Health Check
              • Querying Health Checks
              • Querying Details of a Health Check
              • Updating a Health Check
              • Eliminación de una comprobación de estado
            • Política de reenvío
              • Adición de una política de reenvío
              • Consulta de directivas de reenvío
              • Consulta de detalles de una directiva de reenvío
              • Actualización de una política de reenvío
              • Eliminación de una política de reenvío
            • Regla de reenvío
              • Adición de una regla de reenvío
              • Consulta de reglas de reenvío
              • Consulta de detalles de una regla de reenvío
              • Actualización de una regla de reenvío
              • Supresión de una regla de reenvío
            • Lista de confianza
              • Adición de una lista blanca
              • Consulta de listas blancas
              • Consulta de detalles de una lista blanca
              • Actualización de una lista blanca
              • Eliminación de una lista blanca
            • Certificado
              • Creación de un certificado
              • Consulta de certificados
              • Consulta de detalles de un certificado
              • Actualización de un certificado
              • Supresión de un certificado
          • Consulta de Trabajo Asincrónico
          • Consulta de versiones
          • Pasos iniciales
            • Creación de un balanceador de carga
            • Obtención de un Token
            • Creación de un balanceador de carga
            • Creación de un balanceador de carga de red pública
            • Adición de un oyente
            • Creación de un grupo de servidores backend
            • Incorporación de servidores de backend
            • Configuración de una comprobación de estado
            • Adición de una política de reenvío
            • Adición de una regla de reenvío
            • Adición de una lista blanca
            • Creación de un certificado SSL
      • Preguntas frecuentes
        • Preguntas populares
        • Anormalidad del servicio
          1. ¿Por qué no puedo acceder a mis servidores backend con un balanceador de carga?
          2. ¿Qué puedo hacer si no se puede acceder a ELB o se interrumpe el enrutamiento de tráfico?
          3. ¿Cómo puedo manejar los códigos de error?
        • Funcionalidad de ELB
          1. ¿Se puede usar ELB por separado?
          2. ¿ELB admite las conexiones persistentes?
          3. ¿ELB admite FTP en servidores backend?
          4. ¿Puede ELB bloquear ataques de DDoS y proteger el código web?
          5. ¿Se asigna una EIP exclusivamente a un balanceador de carga?
          6. ¿Cuántos balanceadores de carga y oyentes puedo tener?
          7. ¿Qué tipos de API proporciona ELB? ¿Qué son los permisos de ELB?
          8. ¿Puedo ajustar el número de servidores backend cuando se está ejecutando un balanceador de carga?
          9. ¿Pueden los servidores backend ejecutar diferentes sistemas operativos?
          10. ¿Puedo configurar diferentes puertos backend para un balanceador de carga?
          11. ¿Se puede usar ELB en todas las cuentas o VPC?
          12. ¿Pueden los servidores backend acceder a los puertos de un balanceador de carga?
          13. ¿Puedo vincular una dirección IP pública comprada de un proveedor de nube de terceros a mi balanceador de carga?
          14. ¿Pueden tanto el oyente como el grupo de servidores de backend usar HTTPS?
          15. ¿Puedo cambiar la VPC y la subred de mi balanceador de carga?
          16. ¿Puedo actualizar un balanceador de carga compartido a un balanceador de carga dedicado sin interrumpir el enrutamiento del tráfico?
          17. ¿ELB admite redes IPv6?
        • Rendimiento de equilibrio de carga
          1. ¿Cómo puedo determinar el tiempo de respuesta del servidor basado en los datos y logs de supervisión?
          2. ¿Cómo puedo comprobar si hay incoherencias de tráfico?
          3. ¿Cómo puedo verificar si el tráfico está siendo distribuido uniformemente?
          4. ¿Cómo puedo comprobar si hay un retraso excesivo en el acceso?
          5. ¿Qué hago si un balanceador de carga falla una prueba de esfuerzo?
        • Balanceadores de carga
          1. ¿Qué es la cuota?
          2. ¿Cómo distribuye ELB el tráfico?
          3. ¿Cómo puedo acceder a un balanceador de carga en todas las VPC?
          4. ¿Cómo puedo configurar el equilibrio de carga para aplicaciones en contenedores?
          5. ¿Necesito configurar el ancho de banda de EIP para mis balanceadores de carga?
          6. ¿Puedo vincular varias EIP a un balanceador de carga?
          7. ¿Por qué se requieren varias direcciones IP al crear o habilitar un balanceador de carga dedicado?
          8. ¿Por qué las solicitudes de la misma dirección IP se enrutan a diferentes servidores backend cuando el algoritmo de equilibrio de carga es hash de IP de origen?
          9. ¿Pueden los servidores backend acceder a Internet con la EIP del balanceador de carga?
          10. ¿Los balanceadores de carga compartidos tienen especificaciones?
          11. ¿Se interrumpirá el enrutamiento de tráfico si se cambia el algoritmo de equilibrio de carga?
          12. ¿Cuál es la diferencia entre el ancho de banda incluido en cada especificación de un balanceador de carga dedicado y el ancho de banda de una EIP?
          13. ¿Cómo puedo combinar ELB y WAF?
        • Oyentes
          1. ¿Cuáles son las relaciones entre los algoritmos de equilibrio de carga y los tipos de sesión adhesiva?
          2. ¿Puedo vincular varios certificados a un oyente?
          3. ¿ELB dejará de distribuir el tráfico inmediatamente después de que se elimine un oyente?
          4. ¿Tiene ELB restricciones en la velocidad y el tamaño de carga de archivos?
          5. ¿Pueden varios balanceadores de carga enrutar las solicitudes a un servidor backend?
          6. ¿Cómo se usa WebSocket?
          7. ¿Por qué no puedo seleccionar el grupo de servidores backend de destino al agregar o modificar un oyente?
          8. ¿Por qué no puedo agregar un oyente a un balanceador de carga dedicado?
        • Servidores backend
          1. ¿Por qué el intervalo en el que los servidores backend reciben paquetes de comprobación de estado es diferente de lo que he configurado?
          2. ¿Pueden los servidores backend acceder a Internet después de estar asociados con un balanceador de carga?
          3. ¿Puede ELB distribuir el tráfico entre servidores que no son proporcionados por Huawei Cloud?
          4. ¿Por qué se accede con frecuencia a los servidores backend mediante direcciones IP en 100.125.0.0/16?
          5. ¿Puede ELB enrutar el tráfico a través de regiones?
          6. ¿Cada servidor backend necesita una EIP para recibir solicitudes de un balanceador de carga de red pública?
          7. ¿Cómo puedo comprobar las condiciones de red de un servidor backend?
          8. ¿Cómo puedo comprobar la configuración de red de un servidor backend?
          9. ¿Cómo puedo comprobar el estado de un servidor backend?
          10. ¿Cuándo se considera saludable un servidor backend?
          11. ¿Cómo puedo comprobar si se puede acceder a un servidor backend por una EIP?
          12. ¿Por qué el número de conexiones activas monitorizadas por Cloud Eye difiere del número de conexiones establecidas con los servidores backend?
          13. ¿Por qué puedo acceder a los servidores backend después de configurar una lista blanca?
          14. ¿Cuándo entrarán en vigor las ponderaciones modificadas?
          15. ¿Por qué la subred donde reside el balanceador de carga debe tener al menos 16 direcciones IP disponibles para habilitar IP como backend?
        • Comprobaciones de estado
          1. ¿Cómo soluciono problemas de un servidor backend insalubre?
          2. ¿Por qué el intervalo en el que los servidores backend reciben paquetes de comprobación de estado es diferente del intervalo configurado?
          3. ¿Cómo realiza ELB las comprobaciones de estado de UDP? ¿Cuáles son las precauciones para las comprobaciones de estado de UDP?
          4. ¿Por qué ELB envía frecuentemente solicitudes a servidores backend durante las comprobaciones de estado?
          5. ¿Cuándo comienza una comprobación de estado?
          6. ¿Los reintentos máximos incluyen comprobaciones de estado que consideran que los servidores backend son insalubres?
          7. ¿Qué hago si se generan muchos logs de acceso durante las comprobaciones de estado?
          8. ¿Qué códigos de estado se devolverán si los servidores backend están identificados como saludables?
        • Obtención de direcciones IP de origen
          1. ¿Cómo puedo transferir la dirección IP de un cliente?
        • Oyentes de HTTP/HTTPS
          1. ¿Qué protocolo debo seleccionar para el grupo de servidores backend al agregar un oyente de HTTPS?
          2. ¿Por qué hay una advertencia de seguridad después de configurar un certificado?
          3. ¿Por qué es una política de reenvío en el estado defectuoso?
          4. ¿Por qué no puedo agregar una política de reenvío a un oyente?
          5. ¿Por qué no puedo seleccionar un grupo de servidores backend existente al agregar una política de reenvío?
        • Sesiones persistentes
          1. ¿Cuáles son las diferencias entre las conexiones persistentes y las sesiones adhesivas?
          2. ¿Cómo puedo comprobar si las sesiones adhesivas no surtieron efecto?
          3. ¿Cómo pruebo sesiones adhesivas con comandos de Linux Curl?
          4. ¿Qué tipos de sesiones adhesivas admite ELB?
        • Certificados
          1. ¿Cómo puedo crear certificados de servidor y certificados de CA?
          2. ¿ELB admite certificados comodín?
          3. ¿Por qué el acceso a los servidores backend sigue siendo anormal incluso si he creado un certificado?
          4. ¿Se interrumpirá la red o el equilibrio de carga cuando se reemplace un certificado?
        • Registro de acceso
          1. ¿Por qué no se muestran los logs de acceso para mi balanceador de carga?
          2. ¿Qué información puedo proporcionar para ayudar al personal de O&M?
        • Monitoreo
          1. ¿Por qué la tasa de salida en la consola de ELB es incompatible con las estadísticas de uso de ancho de banda en la consola de Cloud Eye?
          2. ¿Cuáles son las diferencias entre los códigos de estado de capa 7 y los códigos de estado backend en las métricas de ELB?
          3. ¿Por qué hay un gran número de errores de HTTP 499?
        • Facturación
          1. ¿Cuándo necesito el ancho de banda público para ELB?
          2. ¿Se me facturará tanto el ancho de banda utilizado por el balanceador de carga como el ancho de banda utilizado por los servidores backend?
          3. ¿Necesito ajustar el ancho de banda de los balanceadores de carga compartida según el ancho de banda utilizado por los servidores backend?
          4. ¿Puedo modificar el ancho de banda de un balanceador de carga?
          5. ¿Qué funciones no estarán disponibles si un balanceador de carga está congelado?
      • What's New
      • Function Overview
      • Billing
        • Billing Overview
        • Billing Mode
          • Overview
          • Pay-per-Use Billing
        • Billing Items (Dedicated Load Balancers)
        • Billing Items (Shared Load Balancers)
        • Billing Examples
        • Bills
        • Arrears
        • Stopping Billing
        • Cost Management
        • FAQs
          • When Do I Need Public Bandwidth for ELB?
          • Will I Be Billed for Both the Bandwidth Used by the Load Balancer and the Bandwidth Used by Backend Servers?
          • Do I Need to Adjust the Bandwidth of Shared Load Balancers Based on the Bandwidth Used by Backend Servers?
          • Can I Modify the Bandwidth of a Load Balancer?
          • What Functions Will Become Unavailable If a Load Balancer Is Frozen?
      • Best Practices
        • Load Balancer Selection and Service Planning
          • Planning Subnets for Dedicated Load Balancers
          • Adding the IP Address of an On-Premises Server as a Backend Server of a Dedicated Load Balancer
          • Using IP as a Backend to Route Traffic Across Backend Servers
            • Overview
            • Routing Traffic to Backend Servers in a Different VPC from the Load Balancer
            • Routing Traffic to Backend Servers in the Same VPC as the Load Balancer
          • Adding a Load Balancer to an AS Group to Automatically Add or Remove Backend Servers
        • Security
          • ELB Security Best Practices
          • Configuring HTTPS at the Frontend and Backend for Access Encryption
          • Integrating WAF with ELB to Protect Your Websites
          • Using ELB and CNAD Advanced to Enhance the Defense Against DDoS Attacks
          • Using Cloud Eye to Monitor ELB Resources
        • Basic Functions
          • Using ELB to Redirect HTTP Requests to an HTTPS Listener for Higher Service Security
          • Configuring One-way Authentication When Adding an HTTPS Listener
          • Configuring Mutual Authentication When Adding an HTTPS Listener
          • Using a Dedicated Load Balancer for TLS Offloading (One-Way Authentication)
          • Using a Dedicated Load Balancer for TLS Offloading (Mutual Authentication)
        • Advanced Functions
          • Using QUIC to Accelerate Access to an Application
          • Using ELB to Distribute gRPC Requests to Improve Concurrency Efficiency
          • Using WebSocket for Real-time Messaging
          • Using a Dedicated Load Balancer to Forward Traffic by Port Ranges
          • Enabling IPv4/IPv6 Translation to Enable IPv6 Clients to Access IPv4 Services
          • Using a Dedicated Load Balancer at Layer 4 to Transfer Client IP Addresses
          • Using a Dedicated Load Balancer at Layer 7 to Transfer Client IP Addresses
          • Querying Client IP Addresses in ELB Access Logs
        • Forwarding Policies
          • Using Advanced Forwarding for Application Iteration
          • Distributing Traffic Based on the Same Domain Name but Different Paths
      • SDK Reference
        • SDK Overview
      • Videos
      • Glossary
      • More Documents
        • User Guide (ME-Abu Dhabi Region)
          • Service Overview
            • What Is Elastic Load Balance?
            • Product Advantages
            • Application Scenarios
            • How ELB Works
            • Network Type
            • ELB and Other Services
            • Product Concepts
              • Basic Concepts
              • Region and AZ
          • Load Balancer
            • Network Type
            • Preparing for Creation
            • Creating a Load Balancer
            • Changing Load Balancer Settings
            • Binding or Unbinding an EIP
            • Deleting a Load Balancer
          • Listener
            • Overview
            • Protocols and Ports
            • Adding a Listener
            • Load Balancing Algorithms
            • Sticky Session
            • Access Control
            • Modifying or Deleting a Listener
            • Advanced Settings for HTTP or HTTPS Listeners
              • Forwarding Policy
              • Mutual Authentication
              • HTTP/2
              • HTTP Redirection to HTTPS
              • SNI
          • Backend Server
            • Overview
            • Configuring Security Group Rules
            • Adding Backend Servers to or Removing Backend Servers
          • Health Check
            • Configuring a Health Check
            • Disabling the Health Check Function
          • Certificate
            • Certificate and Private Key Format
            • Converting Certificate Formats
            • Creating a Certificate
          • Access Logging
          • Monitoring
            • Monitoring Metrics
            • Setting an Alarm Rule
              • Adding an Alarm Rule
              • Modifying an Alarm Rule
            • Viewing Metrics
          • Auditing
            • Key Operations Recorded by CTS
            • Viewing Traces
          • FAQs
            • Questions Summary
            • ELB Usage
              • Service Abnormality
                • How Can I Check ELB Unavailability or Routing Interruption?
              • ELB Functionality
                • Can ELB Be Used Separately?
                • Is the EIP Assigned to a Load Balancer Exclusive?
                • How Many Load Balancers and Listeners Can I Have?
                • Can I Adjust the Number of Backend Servers When a Load Balancer is Running?
                • Can Backend Servers Run Different OSs?
              • Performance and Workloads
                • How Can I Check Traffic Inconsistency?
                • How Can I Check that Traffic Is Unbalanced?
                • How Can I Check High Access Delay of a Load Balancer?
                • What Should I Do If a Load Balancer's Performance Fails the Stress Test?
            • Load Balancer
              • How Does ELB Distribute Traffic?
              • How Can I Configure a Public or Private Network Load Balancer?
            • Listener
              • What Are the Relationships Between Load Balancing Algorithms and Sticky Session Types?
              • How Can ELB Support Multiple Certificates?
              • How Can I Use WebSocket?
            • Backend Server
              • Why Is the Interval at Which Backend Servers Receive Health Check Packets Is Different from the Configured Health Check Interval?
              • Can Backend Servers Access the Public Network After They Are Associated with a Load Balancer?
              • How Can I Check the Network Conditions of a Backend Server?
              • How Can I Check the Network Configuration of a Backend Server?
              • How Can I Check the Status of a Backend Server?
              • When Is a Backend Server Considered Healthy?
            • Health Check
              • What Should I Do If a Backend Server Is Unhealthy?
              • What Are the Precautions of Using UDP for Health Checks?
              • Why Does ELB Frequently Send Requests to Backend Servers During Health Checks?
            • Obtaining Source IP Addresses
              • How Can I Obtain the IP Address of a Client?
            • HTTP/HTTPS Listeners
              • Why Is the Security Warning Still Displayed After a Certificate Is Configured?
            • Sticky Session
              • What Should I Do If Sticky Sessions Fail to Take Effect?
              • What Types of Sticky Sessions Does ELB Support?
          • Appendix
            • Configuring the TOA Plug-in
          • Change History
        • API Reference (ME-Abu Dhabi Region)
          • Before You Start
            • Notes and Constraints
            • Concepts
          • API Overview
          • Calling APIs
            • Making an API Request
            • Authentication
            • Response
          • Getting Started
            • Creating a Load Balancer
          • Load Balancer APIs
            • Load Balancer
              • Creating a Load Balancer
              • Querying Load Balancers
              • Querying Details of a Load Balancer
              • Querying the Status Tree of a Load Balancer
              • Updating a Load Balancer
              • Deleting a Load Balancer
            • Listener
              • Adding a Listener
              • Querying Listeners
              • Querying Details of a Listener
              • Updating a Listener
              • Deleting a Listener
            • Backend Server Group
              • Adding a Backend Server Group
              • Querying Backend Server Groups
              • Querying Details of a Backend Server Group
              • Updating a Backend Server Group
              • Deleting a Backend Server Group
            • Backend Server
              • Adding a Backend Server
              • Querying Backend Servers
              • Querying Details of a Backend Server
              • Updating a Backend Server
              • Removing a Backend Server
            • Health Check
              • Configuring a Health Check
              • Querying Health Checks
              • Querying Details of a Health Check
              • Updating a Health Check
              • Deleting a Health Check
            • Forwarding Policy
              • Adding a Forwarding Policy
              • Querying Forwarding Policies
              • Querying Details of a Forwarding Policy
              • Updating a Forwarding Policy
              • Deleting a Forwarding Policy
            • Forwarding Rule
              • Adding a Forwarding Rule
              • Querying Forwarding Rules
              • Querying Details of a Forwarding Rule
              • Updating a Forwarding Rule
              • Deleting a Forwarding Rule
            • Whitelist
              • Adding a Whitelist
              • Querying Whitelists
              • Querying Details of a Whitelist
              • Updating a Whitelist
              • Deleting a Whitelist
            • Certificate
              • Creating a Certificate
              • Querying Certificates
              • Querying Details of a Certificate
              • Updating a Certificate
              • Deleting a Certificate
          • Load Balancer (Enterprise Project) APIs
            • Load Balancer
              • Creating a Load Balancer
              • Querying Load Balancers
              • Querying Details of a Load Balancer
              • Querying the Status Tree of a Load Balancer
              • Updating a Load Balancer
              • Deleting a Load Balancer
            • Listener
              • Adding a Listener
              • Querying Details of a Listener
              • Querying Listeners
              • Updating a Listener
              • Deleting a Listener
            • Backend Server Group
              • Adding a Backend Server Group
              • Querying Backend Server Groups
              • Querying Details of a Backend Server Group
              • Updating a Backend Server Group
              • Deleting a Backend Server Group
            • Backend Server
              • Adding a Backend Server
              • Querying Backend Servers
              • Querying Details of a Backend Server
              • Updating a Backend Server
              • Removing a Backend Server
            • Health Check
              • Configuring a Health Check
              • Querying Health Checks
              • Querying Health Check Details
              • Updating a Health Check
              • Deleting a Health Check
            • Forwarding Policy
              • Adding a Forwarding Policy
              • Querying Forwarding Policies
              • Querying Details of a Forwarding Policy
              • Updating a Forwarding Policy
              • Deleting a Forwarding Policy
            • Forwarding Rule
              • Adding a Forwarding Rule
              • Querying Forwarding Rules
              • Querying Details of a Forwarding Rule
              • Updating a Forwarding Rule
              • Deleting a Forwarding Rule
            • Whitelist
              • Adding a Whitelist
              • Querying Details of a Whitelist
              • Querying a Whitelist
              • Updating a Whitelist
              • Deleting a Whitelist
            • Certificate
              • Creating a Certificate
              • Querying Certificates
              • Querying Details of a Certificate
              • Updating a Certificate
              • Deleting a Certificate
          • Common Parameters
            • HTTP Status Codes of Load Balancers
          • Appendix
            • Monitoring Metrics
            • General Information About Load Balancers
              • Querying Data in Pages
              • Sequencing Query Results
              • Querying Versions
              • Basic Workflow
            • Obtaining a Project ID
          • Change History
        • User Guide (Paris Region)
          • Service Overview
            • What Is ELB?
            • Product Advantages
            • How ELB Works
            • Application Scenarios
            • Differences Between Dedicated and Shared Load Balancers
            • Load Balancing on a Public or Private Network
            • Network Traffic Paths
            • Specifications of Dedicated Load Balancers
            • Quotas and Constraints
            • Billing (Shared Load Balancers)
            • Billing (Dedicated Load Balancers)
            • Permissions
            • Product Concepts
              • Basic Concepts
              • Region and AZ
            • How ELB Works with Other Services
          • Getting Started
            • Overview
            • Process Flowchart
            • Using Shared Load Balancers (Entry Level)
            • Using Shared Load Balancers (Advanced Level)
          • Load Balancer
            • Overview
            • Preparations for Creating a Load Balancer
            • Creating a Dedicated Load Balancer
            • Creating a Shared Load Balancer
            • Configuring Deletion Protection for Load Balancers
            • Modifying the Bandwidth
            • Changing the Specifications of a Dedicated Load Balancer
            • Changing an IP Address
            • Binding an IP Address to or Unbinding an IP Address from a Load Balancer
            • Adding to or Removing from an IPv6 Shared Bandwidth
            • Exporting the Load Balancer List
            • Deleting a Load Balancer
          • Listener
            • Overview
            • Protocols and Ports
            • Adding a TCP Listener
            • Adding a UDP Listener
            • Adding an HTTP Listener
            • Adding an HTTPS Listener
            • Adding a UDP Listener (with a QUIC Backend Server Group Associated)
            • Configuring Timeout Durations
            • Modifying or Deleting a Listener
            • Transfer Client IP Address
          • Advanced Features of HTTP/HTTPS Listeners
            • Forwarding Policy (Shared Load Balancers)
            • Forwarding Policy (Dedicated Load Balancers)
            • Advanced Forwarding (Dedicated Load Balancers)
              • Advanced Forwarding
              • Managing an Advanced Forwarding Policy
            • Mutual Authentication
            • HTTP/2
            • HTTP Redirection to HTTPS
            • Rewriting the X-Forwarded-Host Field
            • SNI Certificate
          • Backend Server Group
            • Overview
            • Key Features
              • Health Check
              • Load Balancing Algorithms
              • Sticky Session
              • Slow Start (Dedicated Load Balancers)
            • Creating a Backend Server Group (Dedicated Load Balancers)
            • Creating a Backend Server Group (Shared Load Balancers)
            • Modifying a Backend Server Group
              • Overview
              • Modifying Health Check Settings
              • Changing the Load Balancing Algorithm
              • Modifying Sticky Session Settings
              • Modifying Slow Start Settings (Dedicated Load Balancers)
            • Changing a Backend Server Group
            • Viewing a Backend Server Group
            • Deleting a Backend Server Group
          • Backend Server (Dedicated Load Balancers)
            • Overview
            • Security Group Rules
            • Managing Backend Servers
              • Adding Backend Servers
              • Viewing Backend Servers
              • Removing Backend Servers
              • Changing Backend Server Weights
            • IP Addresses as Backend Servers
              • Overview
              • Enabling IP as a Backend
              • Adding IP Addresses as Backend Servers
              • Viewing Backend Servers
              • Removing Backend Servers
              • Changing Backend Server Weights
          • Backend Server (Shared Load Balancers)
            • Overview
            • Security Group Rules
            • Managing Backend Servers
              • Adding Backend Servers
              • Viewing Backend Servers
              • Removing Backend Servers
              • Changing Backend Server Weights
          • Certificate
            • Introduction to Certificates
            • Certificate and Private Key Format
            • Converting Certificate Formats
            • Adding, Modifying, or Deleting a Certificate
            • Replacing the Certificate Bound to a Listener
            • Replacing the Certificate Bound to Different Listeners
            • Querying Listeners by Certificate
          • Access Control
            • Access Control
            • Managing IP Address Groups
              • Creating an IP Address Group
              • Viewing the Details of an IP Address Group
              • Managing IP Addresses in an IP Address Group
              • Deleting an IP Address Group
          • TLS Security Policy
          • Tag
          • Access Logging
          • Monitoring
            • Monitoring Metrics
            • Setting an Alarm Rule
              • Creating an Alarm Rule
              • Modifying an Alarm Rule
            • Viewing Metrics
          • Auditing
            • Key Operations Recorded by CTS
            • Viewing Traces
          • Load Balancer Migration
            • Migrating from Classic Load Balancers to Shared Load Balancers
          • Permissions Management
            • Creating a User and Granting Permissions
            • Creating a Custom Policy
          • Quotas
          • FAQ
            • Popular Questions
            • Why Can't I Access My Backend Servers Through a Load Balancer?
            • What Can I Do If ELB Can't Be Accessed or Traffic Routing is Interrupted?
            • How Can I Handle Error Codes?
            • Can ELB Be Used Separately?
            • Does ELB Support Persistent Connections?
            • Does ELB Support FTP on Backend Servers?
            • Is an EIP Assigned Exclusively to a Load Balancer?
            • How Many Load Balancers and Listeners Can I Have?
            • What Types of APIs Does ELB Provide? What Are Permissions of ELB?
            • Can I Adjust the Number of Backend Servers When a Load Balancer is Running?
            • Can Backend Servers Run Different OSs?
            • Can I Configure Different Backend Ports for a Load Balancer?
            • Can ELB Be Used Across Accounts or VPCs?
            • Can Backend Servers Access the Ports of a Load Balancer?
            • Can Both the Listener and Backend Server Group Use HTTPS?
            • Can I Change the VPC and Subnet for My Load Balancer?
            • Can I Upgrade a Shared Load Balancer to a Dedicated Load Balancer Without Interrupting Traffic Routing?
            • Does ELB Support IPv6 Networks?
            • How Do I Check for Traffic Inconsistencies?
            • How Do I Check If Traffic Is Being Evenly Distributed?
            • How Do I Check If There Is Excessive Access Delay?
            • What Do I Do If a Load Balancer Fails a Stress Test?
            • Load Balancers
              • How Does ELB Distribute Traffic?
              • How Can I Access a Load Balancer Across VPCs?
              • How Can I Configure Load Balancing for Containerized Applications?
              • Why Can't I Delete My Load Balancer?
              • Do I Need to Configure EIP Bandwidth for My Load Balancers?
              • Can I Bind Multiple EIPs to a Load Balancer?
              • Why Multiple IP Addresses Are Required When I Create or Enable a Dedicated Load Balancer?
              • Why Are Requests from the Same IP Address Routed to Different Backend Servers When the Load Balancing Algorithm Is Source IP Hash?
              • Can Backend Servers Access the Internet Using the EIP of the Load Balancer?
              • Do Shared Load Balancers Have Specifications?
              • Will Traffic Routing Be Interrupted If the Load Balancing Algorithm Is Changed?
              • What Is the Difference Between the Bandwidth Included in Each Specification of a Dedicated Load Balancer and the Bandwidth of an EIP?
              • How Do I Combine ELB and WAF?
            • Listeners
              • What Are the Relationships Between Load Balancing Algorithms and Sticky Session Types?
              • Can I Bind Multiple Certificates to a Listener?
              • What HTTP Headers Can I Configure for an HTTP and HTTP Listener?
              • Will ELB Stop Distributing Traffic Immediately After a Listener Is Deleted?
              • Does ELB Have Restrictions on the File Upload Speed and Size?
              • Can Multiple Load Balancers Route Requests to One Backend Server?
              • How Is WebSocket Used?
              • Why Can't I Select the Target Backend Server Group When Adding or Modifying a Listener?
              • Why Cannot I Add a Listener to a Dedicated Load Balancer?
            • Backend Servers
              • Why Is the Interval at Which Backend Servers Receive Health Check Packets Different from What I Have Configured?
              • Can Backend Servers Access the Internet After They Are Associated with a Load Balancer?
              • Why Are Backend Servers Frequently Accessed by IP Addresses in 100.125.0.0/16?
              • Can ELB Route Traffic Across Regions?
              • Does Each Backend Server Need an EIP to Receive Requests from a Public Network Load Balancer?
              • How Do I Check the Network Conditions of a Backend Server?
              • How Can I Check the Network Configuration of a Backend Server?
              • How Do I Check the Status of a Backend Server?
              • When Is a Backend Server Considered Healthy?
              • How Do I Check Whether a Backend Server Can Be Accessed Through an EIP?
              • Why Is the Number of Active Connections Monitored by Cloud Eye Different from the Number of Connections Established with the Backend Servers?
              • Why Can I Access Backend Servers After a Whitelist Is Configured?
              • When Will Modified Weights Take Effect?
              • Why Must the Subnet Where the Load Balancer Resides Have at Least 16 Available IP Addresses for Enabling IP as a Backend?
            • Health Checks
              • How Do I Troubleshoot an Unhealthy Backend Server?
              • Why Is the Interval at Which Backend Servers Receive Health Check Packets Different from the Configured Interval?
              • How Does ELB Perform UDP Health Checks? What Are the Precautions for UDP Health Checks?
              • Why Does ELB Frequently Send Requests to Backend Servers During Health Checks?
              • When Does a Health Check Start?
              • Do Maximum Retries Include Health Checks That Consider Backend Servers Unhealthy?
              • What Do I Do If a Lot of Access Logs Are Generated During Health Checks?
              • What Status Codes Will Be Returned If Backend Servers Are Identified as Healthy?
            • Obtaining Source IP Addresses
              • How Can I Transfer the IP Address of a Client?
            • HTTP/HTTPS Listeners
              • Which Protocol Should I Select for the Backend Server Group When Adding an HTTPS Listener?
              • Why Is There a Security Warning After a Certificate Is Configured?
              • Why Is a Forwarding Policy in the Faulty State?
              • Why Can't I Add a Forwarding Policy to a Listener?
              • Why Cannot I Select an Existing Backend Server Group When Adding a Forwarding Policy?
            • Sticky Sessions
              • What Are the Differences Between Persistent Connections and Sticky Sessions?
              • How Do I Check If Sticky Sessions Failed to Take Effect?
              • How Do I Test Sticky Sessions Using Linux Curl Commands?
              • What Types of Sticky Sessions Does ELB Support?
            • Certificates
              • How Can I Create Server Certificates and CA Certificates?
              • Does ELB Support Wildcard Certificates?
              • Why Is Access to Backend Servers Still Abnormal Even If I Have Created a Certificate?
              • Will the Network or Load Balancing Be Interrupted When a Certificate Is Being Replaced?
            • Monitoring
              • Why Is the Outgoing Rate on the ELB Console Inconsistent with the Bandwidth Usage Statistics on the Cloud Eye Console?
              • What Are the Differences Between Layer-7 Status Codes and Backend Status Codes in ELB Metrics?
          • Change History
        • API Reference (Paris Region)
          • Before You Start
            • Overview
            • API Calling
            • Endpoints
            • Notes and Constraints
            • Concepts
          • API Overview
          • Calling APIs
            • Making an API Request
            • Authentication
            • Response
          • Getting Started
            • Creating a Load Balancer
            • Obtaining a Token
          • Dedicated Load Balancer APIs
            • API Version
              • Querying API Versions
            • Quota
              • Querying Quotas
              • Querying Quota Usage
            • AZ
              • Querying AZs
            • Load Balancer
              • Creating a Load Balancer
              • Querying Load Balancers
              • Viewing Details of a Load Balancer
              • Updating a Load Balancer
              • Deleting a Load Balancer
              • Querying the Status Tree of a Load Balancer
            • Certificate
              • Creating a Certificate
              • Querying Certificates
              • Viewing Details of a Certificate
              • Updating a Certificate
              • Deleting a Certificate
            • Security Policy
              • Creating a Custom Security Policy
              • Querying Custom Security Policies
              • Querying Details of a Custom Security Policy
              • Updating a Custom Security Policy
              • Deleting a Custom Security Policy
              • Querying System Security Policies
            • IP Address Group
              • Creating an IP Address Group
              • Querying IP Address Groups
              • Viewing Details of an IP Address Group
              • Updating an IP Address Group
              • Deleting an IP Address Group
              • Updating IP Addresses in an IP Address Group
              • Deleting IP Addresses from an IP Address Group
            • Listener
              • Adding a Listener
              • Querying Listeners
              • Viewing Details of a Listener
              • Updating a Listener
              • Deleting a Listener
            • Backend Server Group
              • Creating a Backend Server Group
              • Querying Backend Server Groups
              • Viewing Details of a Backend Server Group
              • Updating a Backend Server Group
              • Deleting a Backend Server Group
            • Backend Server
              • Adding a Backend Server
              • Querying Backend Servers
              • Viewing Details of a Backend Server
              • Updating a Backend Server
              • Removing a Backend Server
            • Health Check
              • Configuring a Health Check
              • Querying Health Checks
              • Viewing Details of a Health Check
              • Updating a Health Check
              • Deleting a Health Check
            • Forwarding Policy
              • Adding a Forwarding Policy
              • Querying Forwarding Policies
              • Viewing Details of a Forwarding Policy
              • Updating a Forwarding Policy
              • Deleting a Forwarding Policy
              • Batch Updating Forwarding Policy Priorities
            • Forwarding Rule
              • Adding a Forwarding Rule
              • Querying Forwarding Rules
              • Viewing Details of a Forwarding Rule
              • Updating a Forwarding Rule
              • Deleting a Forwarding Rule
          • Classic Load Balancer APIs
            • Load Balancer
              • Creating a Load Balancer (Discarded)
              • Deleting a Load Balancer
              • Deleting a Public Network Load Balancer
              • Modifying a Load Balancer
              • Querying Details of a Load Balancer
              • Querying Load Balancers
            • Listener
              • Adding a Listener
              • Deleting a Listener
              • Modifying a Listener
              • Querying Details of a Listener
              • Querying Listeners
            • Health Check
              • Configuring a Health Check
              • Deleting a Health Check
              • Modifying a Health Check
              • Querying Details of a Health Check
            • Backend ECS
              • Adding Backend ECSs
              • Removing Backend ECSs
              • Querying Backend ECSs
            • Quota
              • Querying Load Balancer or Listener Quotas
            • Certificate
              • Creating a Certificate
              • Deleting a Certificate
              • Modifying a Certificate
              • Querying Certificates
            • Querying the Job Status
            • Querying Monitoring Metrics
            • API Version
              • Querying All API Versions
              • Querying a Specific API Version
          • Enhanced Load Balancer APIs
            • Load Balancer
              • Creating a Load Balancer
              • Querying Load Balancers
              • Querying Details of a Load Balancer
              • Querying the Status Tree of a Load Balancer
              • Updating a Load Balancer
              • Deleting a Load Balancer
            • Listener
              • Adding a Listener
              • Querying Listeners
              • Querying Details of a Listener
              • Updating a Listener
              • Deleting a Listener
            • Backend Server Group
              • Adding a Backend Server Group
              • Querying Backend Server Groups
              • Querying Details of a Backend Server Group
              • Updating a Backend Server Group
              • Deleting a Backend Server Group
            • Backend Server
              • Adding a Backend Server
              • Querying Backend Servers
              • Querying Details of a Backend Server
              • Updating a Backend Server
              • Removing a Backend Server
            • Health Check
              • Configuring a Health Check
              • Querying Health Checks
              • Querying Details of a Health Check
              • Updating a Health Check
              • Deleting a Health Check
            • Forwarding Policy
              • Adding a Forwarding Policy
              • Querying Forwarding Policies
              • Querying Details of a Forwarding Policy
              • Updating a Forwarding Policy
              • Deleting a Forwarding Policy
            • Forwarding Rule
              • Adding a Forwarding Rule
              • Querying Forwarding Rules
              • Querying Details of a Forwarding Rule
              • Updating a Forwarding Rule
              • Deleting a Forwarding Rule
            • Whitelist
              • Adding a Whitelist
              • Querying Whitelists
              • Querying Details of a Whitelist
              • Updating a Whitelist
              • Deleting a Whitelist
            • Certificate
              • Creating a Certificate
              • Querying Certificates
              • Querying Details of a Certificate
              • Updating a Certificate
              • Deleting a Certificate
          • Appendix
            • Error Codes
            • Status Codes
            • Monitoring Metrics
            • General Information About SharedLoad Balancers
              • Querying Data in Pages
              • Sequencing Query Results
              • Basic Workflow
            • Obtaining a Project ID
          • Change History
        • User Guide (Kuala Lumpur Region)
          • Service Overview
            • What Is ELB?
            • Product Advantages
            • How ELB Works
            • Application Scenarios
            • Load Balancing on a Public or Private Network
            • Network Traffic Paths
            • Specifications of Dedicated Load Balancers
            • Quotas and Constraints
            • Permissions
            • Product Concepts
              • Basic Concepts
              • Region and AZ
            • How ELB Works with Other Services
          • Getting Started
            • Overview
            • Process Flowchart
            • Using Load Balancers (Entry Level)
            • Using Load Balancers (Advanced Level)
          • Load Balancer
            • Overview
            • Preparations for Creating a Load Balancer
            • Creating a Dedicated Load Balancer
            • Modifying the Bandwidth
            • Changing the Specifications of a Dedicated Load Balancer
            • Changing an IP Address
            • Binding an IP Address to or Unbinding an IP Address from a Load Balancer
            • Adding to or Removing from an IPv6 Shared Bandwidth
            • Exporting the Load Balancer List
            • Deleting a Load Balancer
          • Listener
            • Overview
            • Protocols and Ports
            • Adding a TCP Listener
            • Adding a UDP Listener
            • Adding an HTTP Listener
            • Adding an HTTPS Listener
            • Configuring Timeout Durations
            • Modifying or Deleting a Listener
            • Transfer Client IP Address
          • Advanced Features of HTTP/HTTPS Listeners
            • Forwarding Policy (Dedicated Load Balancers)
            • Mutual Authentication
            • HTTP/2
            • HTTP Redirection to HTTPS
            • Transferring the Load Balancer EIP to Backend Servers
            • SNI Certificate
          • Backend Server Group
            • Overview
            • Key Features
              • Health Check
              • Load Balancing Algorithms
              • Sticky Session
              • Slow Start (Dedicated Load Balancers)
            • Creating a Backend Server Group
            • Modifying a Backend Server Group
              • Overview
              • Modifying Health Check Settings
              • Changing the Load Balancing Algorithm
              • Modifying Sticky Session Settings
              • Modifying Slow Start Settings (Dedicated Load Balancers)
            • Changing a Backend Server Group
            • Viewing a Backend Server Group
            • Deleting a Backend Server Group
          • Backend Server
            • Overview
            • Security Group Rules
            • Managing Backend Servers
              • Adding Backend Servers
              • Viewing Backend Servers
              • Removing Backend Servers
              • Changing Backend Server Weights
            • IP Addresses as Backend Servers
              • Overview
              • Enabling IP as a Backend
              • Adding IP Addresses as Backend Servers
              • Viewing Backend Servers
              • Removing Backend Servers
              • Changing Backend Server Weights
          • Certificate
            • Introduction to Certificates
            • Certificate and Private Key Format
            • Converting Certificate Formats
            • Adding, Modifying, or Deleting a Certificate
            • Replacing the Certificate Bound to a Listener
            • Replacing the Certificate Bound to Different Listeners
            • Querying Listeners by Certificate
          • Access Control
            • Access Control
            • Managing IP Address Groups
              • Creating an IP Address Group
              • Viewing the Details of an IP Address Group
              • Managing IP Addresses in an IP Address Group
              • Deleting an IP Address Group
          • Access Logging
          • Monitoring
            • Monitoring Metrics
            • Setting an Alarm Rule
              • Creating an Alarm Rule
              • Modifying an Alarm Rule
            • Viewing Metrics
          • Auditing
            • Key Operations Recorded by CTS
            • Viewing Traces
          • Quotas
          • FAQ
            • Popular Questions
            • Service Abnormality
              • Why Can't I Access My Backend Servers Through a Load Balancer?
              • What Can I Do If ELB Can't Be Accessed or Traffic Routing is Interrupted?
              • How Can I Handle Error Codes?
            • ELB Functionality
              • Can ELB Be Used Separately?
              • Does ELB Support Persistent Connections?
              • Does ELB Support FTP on Backend Servers?
              • Is an EIP Assigned Exclusively to a Load Balancer?
              • How Many Load Balancers and Listeners Can I Have?
              • What Types of APIs Does ELB Provide? What Are Permissions of ELB?
              • Can I Adjust the Number of Backend Servers When a Load Balancer is Running?
              • Can Backend Servers Run Different OSs?
              • Can I Configure Different Backend Ports for a Load Balancer?
              • Can ELB Be Used Across Accounts or VPCs?
              • Can Backend Servers Access the Ports of a Load Balancer?
              • Can Both the Listener and Backend Server Group Use HTTPS?
              • Can I Change the VPC and Subnet for My Load Balancer?
            • Load Balancing Performance
              • How Do I Check for Traffic Inconsistencies?
              • How Do I Check If Traffic Is Being Evenly Distributed?
              • How Do I Check If There Is Excessive Access Delay?
              • What Do I Do If a Load Balancer Fails a Stress Test?
            • Load Balancers
              • How Does ELB Distribute Traffic?
              • How Can I Access a Load Balancer Across VPCs?
              • Do I Need to Configure EIP Bandwidth for My Load Balancers?
              • Can I Bind Multiple EIPs to a Load Balancer?
              • Why Multiple IP Addresses Are Required When I Create or Enable a Dedicated Load Balancer?
              • Why Are Requests from the Same IP Address Routed to Different Backend Servers When the Load Balancing Algorithm Is Source IP Hash?
              • Can Backend Servers Access the Internet Using the EIP of the Load Balancer?
              • Will Traffic Routing Be Interrupted If the Load Balancing Algorithm Is Changed?
              • What Is the Difference Between the Bandwidth Included in Each Specification of a Dedicated Load Balancer and the Bandwidth of an EIP?
            • Listeners
              • What Are the Relationships Between Load Balancing Algorithms and Sticky Session Types?
              • Can I Bind Multiple Certificates to a Listener?
              • Will ELB Stop Distributing Traffic Immediately After a Listener Is Deleted?
              • Does ELB Have Restrictions on the File Upload Speed and Size?
              • Can Multiple Load Balancers Route Requests to One Backend Server?
              • How Is WebSocket Used?
              • Why Can't I Select the Target Backend Server Group When Adding or Modifying a Listener?
              • Why Cannot I Add a Listener to a Dedicated Load Balancer?
            • Backend Servers
              • Why Is the Interval at Which Backend Servers Receive Health Check Packets Different from What I Have Configured?
              • Can Backend Servers Access the Internet After They Are Associated with a Load Balancer?
              • Can ELB Route Traffic Across Regions?
              • Does Each Backend Server Need an EIP to Receive Requests from a Public Network Load Balancer?
              • How Do I Check the Network Conditions of a Backend Server?
              • How Can I Check the Network Configuration of a Backend Server?
              • How Do I Check the Status of a Backend Server?
              • When Is a Backend Server Considered Healthy?
              • Why Can I Access Backend Servers After a Whitelist Is Configured?
              • When Will Modified Weights Take Effect?
              • Why Must the Subnet Where the Load Balancer Resides Have at Least 16 Available IP Addresses for Enabling IP as a Backend?
            • Health Checks
              • How Do I Troubleshoot an Unhealthy Backend Server?
              • Why Is the Interval at Which Backend Servers Receive Health Check Packets Different from the Configured Interval?
              • How Does ELB Perform UDP Health Checks? What Are the Precautions for UDP Health Checks?
              • Why Does ELB Frequently Send Requests to Backend Servers During Health Checks?
              • When Does a Health Check Start?
              • Do Maximum Retries Include Health Checks That Consider Backend Servers Unhealthy?
              • What Do I Do If a Lot of Access Logs Are Generated During Health Checks?
              • What Status Codes Will Be Returned If Backend Servers Are Identified as Healthy?
            • Obtaining Source IP Addresses
              • How Can I Transfer the IP Address of a Client?
            • HTTP/HTTPS Listeners
              • Which Protocol Should I Select for the Backend Server Group When Adding an HTTPS Listener?
              • Why Is There a Security Warning After a Certificate Is Configured?
              • Why Is a Forwarding Policy in the Faulty State?
              • Why Can't I Add a Forwarding Policy to a Listener?
              • Why Cannot I Select an Existing Backend Server Group When Adding a Forwarding Policy?
            • Sticky Sessions
              • What Are the Differences Between Persistent Connections and Sticky Sessions?
              • How Do I Check If Sticky Sessions Failed to Take Effect?
              • How Do I Test Sticky Sessions Using Linux Curl Commands?
              • What Types of Sticky Sessions Does ELB Support?
            • Certificates
              • How Can I Create Server Certificates and CA Certificates?
              • Does ELB Support Wildcard Certificates?
              • Why Is Access to Backend Servers Still Abnormal Even If I Have Created a Certificate?
              • Will the Network or Load Balancing Be Interrupted When a Certificate Is Being Replaced?
            • Monitoring
              • Why Is the Outgoing Rate on the ELB Console Inconsistent with the Bandwidth Usage Statistics on the Cloud Eye Console?
              • What Are the Differences Between Layer-7 Status Codes and Backend Status Codes in ELB Metrics?
              • Why Is There a Large Number of HTTP 499 Errors?
          • Change History
        • API Reference (Kuala Lumpur Region)
          • Before You Start
            • Endpoints
            • Notes and Constraints
            • Concepts
          • API Overview
          • Calling APIs
            • Making an API Request
            • Authentication
            • Response
          • APIs
            • Load Balancer
              • Creating a Load Balancer
              • Querying Load Balancers
              • Querying Details of a Load Balancer
              • Querying the Status Tree of a Load Balancer
              • Updating a Load Balancer
              • Deleting a Load Balancer
            • Listener
              • Adding a Listener
              • Querying Details of a Listener
              • Querying Listeners
              • Updating a Listener
              • Deleting a Listener
            • Backend Server Group
              • Adding a Backend Server Group
              • Querying Backend Server Groups
              • Querying Details of a Backend Server Group
              • Updating a Backend Server Group
              • Deleting a Backend Server Group
            • Backend Server
              • Adding a Backend Server
              • Querying Backend Servers
              • Querying Details of a Backend Server
              • Updating a Backend Server
              • Removing a Backend Server
            • Health Check
              • Configuring a Health Check
              • Querying Health Checks
              • Querying Health Check Details
              • Updating a Health Check
              • Deleting a Health Check
            • Forwarding Policy
              • Adding a Forwarding Policy
              • Querying Forwarding Policies
              • Querying Details of a Forwarding Policy
              • Updating a Forwarding Policy
              • Deleting a Forwarding Policy
            • Forwarding Rule
              • Adding a Forwarding Rule
              • Querying Forwarding Rules
              • Querying Details of a Forwarding Rule
              • Updating a Forwarding Rule
              • Deleting a Forwarding Rule
            • Whitelist
              • Adding a Whitelist
              • Querying Details of a Whitelist
              • Querying Whitelists
              • Updating a Whitelist
              • Deleting a Whitelist
            • Certificate
              • Creating a Certificate
              • Querying Certificates
              • Querying Details of a Certificate
              • Updating a Certificate
              • Deleting a Certificate
          • Permissions Policies and Supported Actions
            • Introduction
            • Supported Actions
              • Load Balancer
              • Listener
              • Backend Server Group
              • Backend Server
              • Health Check
              • Forwarding Policy
              • Forwarding Rule
              • Whitelist
              • SSL Certificate
              • Quota
              • Tag
              • Precautions for API Permissions
          • Appendix
            • Status Codes
            • Monitoring Metrics
            • General Information About Load Balancers
              • Querying Data in Pages
              • Sequencing Query Results
              • Basic Workflow
            • Obtaining a Project ID
          • Historical APIs
            • Load Balancer APIs (OpenStack)
              • Load Balancer
                • Creating a Load Balancer
                • Querying Load Balancers
                • Querying Details of a Load Balancer
                • Querying the Status Tree of a Load Balancer
                • Updating a Load Balancer
                • Deleting a Load Balancer
              • Listener
                • Adding a Listener
                • Querying Listeners
                • Querying Details of a Listener
                • Updating a Listener
                • Deleting a Listener
              • Backend Server Group
                • Adding a Backend Server Group
                • Querying Backend Server Groups
                • Querying Details of a Backend Server Group
                • Updating a Backend Server Group
                • Deleting a Backend Server Group
              • Backend Server
                • Adding a Backend Server
                • Querying Backend Servers
                • Querying Details of a Backend Server
                • Updating a Backend Server
                • Removing a Backend Server
              • Health Check
                • Configuring a Health Check
                • Querying Health Checks
                • Querying Details of a Health Check
                • Updating a Health Check
                • Deleting a Health Check
              • Forwarding Policy
                • Adding a Forwarding Policy
                • Querying Forwarding Policies
                • Querying Details of a Forwarding Policy
                • Updating a Forwarding Policy
                • Deleting a Forwarding Policy
              • Forwarding Rule
                • Adding a Forwarding Rule
                • Querying Forwarding Rules
                • Querying Details of a Forwarding Rule
                • Updating a Forwarding Rule
                • Deleting a Forwarding Rule
              • Whitelist
                • Adding a Whitelist
                • Querying Whitelists
                • Querying Details of a Whitelist
                • Updating a Whitelist
                • Deleting a Whitelist
              • Certificate
                • Creating a Certificate
                • Querying Certificates
                • Querying Details of a Certificate
                • Updating a Certificate
                • Deleting a Certificate
            • Querying Versions
            • Getting Started
              • Creating a Load Balancer
          • Change History
        • User Guide (Ankara Region)
          • Service Overview
            • What Is ELB?
            • Product Advantages
            • How ELB Works
            • Application Scenarios
            • Load Balancing on a Public or Private Network
            • Network Traffic Paths
            • Quotas and Constraints
            • Permissions
            • Product Concepts
              • Basic Concepts
              • Region and AZ
            • How ELB Works with Other Services
          • Load Balancer
            • Overview
            • Preparations for Creating a Load Balancer
            • Creating a Dedicated Load Balancer
            • Modifying the Bandwidth
            • Changing an IP Address
            • Binding an IP Address to or Unbinding an IP Address from a Load Balancer
            • Exporting the Load Balancer List
            • Deleting a Load Balancer
          • Listener
            • Overview
            • Adding a TCP Listener
            • Adding a UDP Listener
            • Adding an HTTP Listener
            • Adding an HTTPS Listener
            • Configuring Timeout Durations
            • Modifying or Deleting a Listener
            • Transfer Client IP Address
          • Advanced Features of HTTP/HTTPS Listeners
            • Forwarding Policy (Dedicated Load Balancers)
            • Mutual Authentication
            • HTTP/2
            • HTTP Redirection to HTTPS
            • Transferring the Load Balancer EIP to Backend Servers
            • SNI Certificate
          • Backend Server Group
            • Overview
            • Key Features
              • Health Check
              • Load Balancing Algorithms
              • Sticky Session
              • Slow Start (Dedicated Load Balancers)
            • Creating a Backend Server Group
            • Modifying a Backend Server Group
              • Overview
              • Modifying Health Check Settings
              • Changing the Load Balancing Algorithm
              • Modifying Sticky Session Settings
              • Modifying Slow Start Settings (Dedicated Load Balancers)
            • Changing a Backend Server Group
            • Viewing a Backend Server Group
            • Deleting a Backend Server Group
          • Backend Server
            • Overview
            • Security Group Rules
            • Managing Backend Servers
              • Adding Backend Servers
              • Viewing Backend Servers
              • Removing Backend Servers
              • Changing Backend Server Weights
            • IP Addresses as Backend Servers
              • Overview
              • Enabling IP as a Backend
              • Adding IP Addresses as Backend Servers
              • Viewing Backend Servers
              • Removing Backend Servers
              • Changing Backend Server Weights
          • Certificate
            • Introduction to Certificates
            • Certificate and Private Key Format
            • Converting Certificate Formats
            • Adding, Modifying, or Deleting a Certificate
            • Replacing the Certificate Bound to a Listener
            • Replacing the Certificate Bound to Different Listeners
            • Querying Listeners by Certificate
          • Access Control
            • Access Control
            • Managing IP Address Groups
              • Creating an IP Address Group
              • Viewing the Details of an IP Address Group
              • Managing IP Addresses in an IP Address Group
              • Deleting an IP Address Group
          • TLS Security Policy
          • Access Logging
          • Monitoring
            • Monitoring Metrics
            • Setting an Alarm Rule
              • Creating an Alarm Rule
              • Modifying an Alarm Rule
            • Viewing Metrics
          • Quotas
          • FAQ
            • Popular Questions
            • ELB Functionality
              • Can ELB Be Used Separately?
              • Does ELB Support Persistent Connections?
              • Does ELB Support FTP on Backend Servers?
              • Is an EIP Assigned Exclusively to a Load Balancer?
              • How Many Load Balancers and Listeners Can I Have?
              • What Types of APIs Does ELB Provide? What Are Permissions of ELB?
              • Can I Adjust the Number of Backend Servers When a Load Balancer is Running?
              • Can Backend Servers Run Different OSs?
              • Can I Configure Different Backend Ports for a Load Balancer?
              • Can ELB Be Used Across Accounts or VPCs?
              • Can Backend Servers Access the Ports of a Load Balancer?
              • Can Both the Listener and Backend Server Group Use HTTPS?
              • Can I Change the VPC and Subnet for My Load Balancer?
            • Load Balancers
              • How Does ELB Distribute Traffic?
              • How Can I Access a Load Balancer Across VPCs?
              • Do I Need to Configure EIP Bandwidth for My Load Balancers?
              • Can I Bind Multiple EIPs to a Load Balancer?
              • Why Multiple IP Addresses Are Required When I Create or Enable a Dedicated Load Balancer?
              • Why Are Requests from the Same IP Address Routed to Different Backend Servers When the Load Balancing Algorithm Is Source IP Hash?
              • Can Backend Servers Access the Internet Using the EIP of the Load Balancer?
              • Will Traffic Routing Be Interrupted If the Load Balancing Algorithm Is Changed?
              • What Is the Difference Between the Bandwidth Included in Each Specification of a Dedicated Load Balancer and the Bandwidth of an EIP?
            • Listeners
              • What Are the Relationships Between Load Balancing Algorithms and Sticky Session Types?
              • Can I Bind Multiple Certificates to a Listener?
              • Will ELB Stop Distributing Traffic Immediately After a Listener Is Deleted?
              • Does ELB Have Restrictions on the File Upload Speed and Size?
              • Can Multiple Load Balancers Route Requests to One Backend Server?
              • How Is WebSocket Used?
              • Why Can't I Select the Target Backend Server Group When Adding or Modifying a Listener?
              • Why Cannot I Add a Listener to a Dedicated Load Balancer?
            • Backend Servers
              • Why Is the Interval at Which Backend Servers Receive Health Check Packets Different from What I Have Configured?
              • Can Backend Servers Access the Internet After They Are Associated with a Load Balancer?
              • Can ELB Route Traffic Across Regions?
              • Does Each Backend Server Need an EIP to Receive Requests from a Public Network Load Balancer?
              • How Do I Check the Network Conditions of a Backend Server?
              • How Can I Check the Network Configuration of a Backend Server?
              • How Do I Check the Status of a Backend Server?
              • When Is a Backend Server Considered Healthy?
              • Why Can I Access Backend Servers After a Whitelist Is Configured?
              • When Will Modified Weights Take Effect?
              • Why Must the Subnet Where the Load Balancer Resides Have at Least 16 Available IP Addresses for Enabling IP as a Backend?
            • Health Checks
              • How Do I Troubleshoot an Unhealthy Backend Server?
              • Why Is the Interval at Which Backend Servers Receive Health Check Packets Different from the Configured Interval?
              • How Does ELB Perform UDP Health Checks? What Are the Precautions for UDP Health Checks?
              • Why Does ELB Frequently Send Requests to Backend Servers During Health Checks?
              • When Does a Health Check Start?
              • Do Maximum Retries Include Health Checks That Consider Backend Servers Unhealthy?
              • What Do I Do If a Lot of Access Logs Are Generated During Health Checks?
              • What Status Codes Will Be Returned If Backend Servers Are Identified as Healthy?
            • Obtaining Source IP Addresses
              • How Can I Transfer the IP Address of a Client?
            • HTTP/HTTPS Listeners
              • Which Protocol Should I Select for the Backend Server Group When Adding an HTTPS Listener?
              • Why Is There a Security Warning After a Certificate Is Configured?
              • Why Is a Forwarding Policy in the Faulty State?
              • Why Can't I Add a Forwarding Policy to a Listener?
              • Why Cannot I Select an Existing Backend Server Group When Adding a Forwarding Policy?
            • Sticky Sessions
              • What Are the Differences Between Persistent Connections and Sticky Sessions?
              • How Do I Check If Sticky Sessions Failed to Take Effect?
              • How Do I Test Sticky Sessions Using Linux Curl Commands?
              • What Types of Sticky Sessions Does ELB Support?
            • Certificates
              • How Can I Create Server Certificates and CA Certificates?
              • Does ELB Support Wildcard Certificates?
              • Why Is Access to Backend Servers Still Abnormal Even If I Have Created a Certificate?
              • Will the Network or Load Balancing Be Interrupted When a Certificate Is Being Replaced?
            • Monitoring
              • Why Is the Outgoing Rate on the ELB Console Inconsistent with the Bandwidth Usage Statistics on the Cloud Eye Console?
              • What Are the Differences Between Layer-7 Status Codes and Backend Status Codes in ELB Metrics?
              • Why Is There a Large Number of HTTP 499 Errors?
          • Change History
        • API Reference (Ankara Region)
          • Before You Start
          • API Overview
          • Calling APIs
            • Making an API Request
            • Authentication
            • Response
          • APIs (V3)
            • API Version
              • Querying API Versions
            • Quota
              • Querying Quotas
              • Querying Quota Usage
            • AZ
              • Querying AZs
            • Load Balancer
              • Querying Load Balancers
              • Viewing the Details of a Load Balancer
              • Updating a Load Balancer
              • Deleting a Load Balancer
              • Querying the Status Tree of a Load Balancer
            • Certificate
              • Creating a Certificate
              • Querying Certificates
              • Querying the Details of a Certificate
              • Updating a Certificate
              • Deleting a Certificate
            • Security Policy
              • Creating a Custom Security Policy
              • Querying Custom Security Policies
              • Querying the Details of a Custom Security Policy
              • Updating a Custom Security Policy
              • Deleting a Custom Security Policy
              • Querying System Security Policies
            • IP Address Group
              • Creating an IP Address Group
              • Querying IP Address Groups
              • Querying the Details of an IP Address Group
              • Updating an IP Address Group
              • Deleting an IP Address Group
              • Updating IP Addresses in an IP Address Group
              • Deleting IP Addresses from an IP Address Group
            • Listener
              • Adding a Listener
              • Querying Listeners
              • Viewing the Details of a Listener
              • Updating a Listener
              • Deleting a Listener
            • Backend Server Group
              • Creating a Backend Server Group
              • Querying Backend Server Groups
              • Querying the Details of a Backend Server Group
              • Updating a Backend Server Group
              • Deleting a Backend Server Group
            • Backend Server
              • Adding a Backend Server
              • Querying Backend Servers
              • Viewing the Details of a Backend Server
              • Updating a Backend Server
              • Removing a Backend Server
            • Health Check
              • Configuring a Health Check
              • Querying Health Checks
              • Viewing the Details of a Health Check
              • Updating a Health Check
              • Deleting a Health Check
            • Forwarding Policy
              • Adding a Forwarding Policy
              • Querying Forwarding Policies
              • Querying the Details of a Forwarding Policy
              • Modifying a Forwarding Policy
              • Deleting a Forwarding Policy
              • Batch Modifying Forwarding Policy Priorities
            • Forwarding Rule
              • Adding a Forwarding Rule
              • Querying Forwarding Rules
              • Viewing the Details of a Forwarding Rule
              • Updating a Forwarding Rule
              • Deleting a Forwarding Rule
          • APIs (V2)
            • Load Balancer
              • Creating a Load Balancer
              • Querying Load Balancers
              • Querying Details of a Load Balancer
              • Querying the Status Tree of a Load Balancer
              • Updating a Load Balancer
              • Deleting a Load Balancer
            • Backend Server Group
              • Adding a Backend Server Group
              • Querying Backend Server Groups
              • Querying Details of a Backend Server Group
              • Updating a Backend Server Group
              • Deleting a Backend Server Group
            • Backend Server
              • Adding a Backend Server
              • Querying Backend Servers
              • Querying Details of a Backend Server
              • Updating a Backend Server
              • Removing a Backend Server
            • Health Check
              • Configuring a Health Check
              • Querying Health Checks
              • Querying Health Check Details
              • Updating a Health Check
              • Deleting a Health Check
            • Forwarding Policy
              • Adding a Forwarding Policy
              • Querying Forwarding Policies
              • Querying Details of a Forwarding Policy
              • Updating a Forwarding Policy
              • Deleting a Forwarding Policy
            • Forwarding Rule
              • Adding a Forwarding Rule
              • Querying Forwarding Rules
              • Querying Details of a Forwarding Rule
              • Updating a Forwarding Rule
              • Deleting a Forwarding Rule
            • Whitelist
              • Adding a Whitelist
              • Querying Details of a Whitelist
              • Querying Whitelists
              • Updating a Whitelist
              • Deleting a Whitelist
            • Certificate
              • Creating a Certificate
              • Querying Certificates
              • Querying Details of a Certificate
              • Updating a Certificate
              • Deleting a Certificate
          • APIs (OpenStack)
            • Tag
              • Adding a Tag to a Load Balancer
              • Batch Adding Load Balancer Tags
              • Batch Deleting Load Balancer Tags
              • Querying All Tags of a Load Balancer
              • Querying the Tags of All Load Balancers
              • Querying Load Balancers by Tag
              • Deleting a Tag from a Load Balancer
              • Adding a Tag to a Listener
              • Batch Adding Tags to a Listener
              • Batch Deleting Tags from a Listener
              • Querying All Tags of a Listener
              • Querying the Tags of All Listeners
              • Querying Listeners by Tag
              • Deleting a Tag from a Listener
              • Status Codes
          • Permissions and Supported Actions
            • Supported Actions (V2)
              • Load Balancer
              • Listener
              • Backend Server Group
              • Backend Server
              • Health Check
              • Forwarding Policy
              • Forwarding Rule
              • Whitelist
              • SSL Certificate
              • Quota
              • Tag
              • Precautions for API Permissions
            • Supported Actions (V3)
              • Load Balancer
              • Listener
              • Backend Server Group
              • Backend Server
              • Health Check
              • Forwarding Policy
              • Forwarding Rule
              • IP Address Group
              • Certificate
              • Security Policy
              • Quota
              • API Version
              • Availability Zone
              • Load Balancer Flavor
              • Precautions for API Permissions
          • Appendix
            • Error Codes
            • Status Codes
            • Obtaining a Project ID
            • Querying Data in Pages
          • Change History