Error Codes
If an error code starting with APIGW is returned after you call an API, rectify the fault by referring to the instructions provided in API Gateway Error Codes.
Status Code |
Error Codes |
Error Message |
Description |
Solution |
|---|---|---|---|---|
100 |
BCS.4006012 |
Invalid channel name. |
Invalid channel name. |
Enter a valid channel name. |
400 |
BCS.2001001 |
BCS service modified. |
BCS service modified. |
The BCS service can work properly. |
400 |
BCS.4001001 |
Operation failed. The BCS service is being created. |
Operation failed. The BCS service is being created. |
Wait until the service is created. |
400 |
BCS.4001002 |
Operation failed. The BCS service is being upgraded. |
Operation failed. The BCS service is being upgraded. |
Wait until the upgrade is complete. |
400 |
BCS.4001003 |
Operation failed. The BCS service is being deleted. |
Operation failed. The BCS service is being deleted. |
Wait until the deletion is complete. |
400 |
BCS.4001006 |
Failed to delete the SFS file system because the CCE API or the cluster status is abnormal. |
Failed to delete the SFS file system because the CCE API or the cluster status is abnormal. |
Manually delete the SFS file system. Procedure: Log in to the CCE console, choose Resource Management > Storage, and locate the file system in the cluster corresponding to the BCS service. For an SFS file system, click Delete in the Operation column. For an SFS Turbo file system, click Unbind and then go to the SFS console to delete the file system. |
400 |
BCS.4001007 |
Services billed in the yearly/monthly mode cannot be deleted. |
Services billed in the yearly/monthly mode cannot be deleted. |
Services billed in the yearly/monthly mode cannot be deleted. They can only be unsubscribed from on the console. |
400 |
BCS.4001008 |
Operation failed. Bind an EIP to at least one node in the cluster and try again. |
Operation failed. Bind an EIP to at least one node in the cluster and try again. |
Bind an EIP to at least one node in the cluster and try again. Procedure: Log in to the CCE console. Choose Resource Management > Nodes. Locate the nodes in the cluster corresponding to the service, and perform the following steps on any node: On the node details page, click the node name. On the displayed ECS console, click the ECS name. On the ECS details page, click the EIPs tab. Click Bind EIP. |
400 |
BCS.4001009 |
Operation failed. Bind an EIP to each node in the cluster and try again. |
Operation failed. Bind an EIP to each node in the cluster and try again. |
Bind an EIP to each node in the cluster and try again. Procedure: Log in to the CCE console. Choose Resource Management > Nodes. In the cluster corresponding to the service, locate the nodes that have not been bound with EIPs, and perform the following steps on each node: On the node details page, click the node name. On the displayed ECS console, click the ECS name. On the ECS details page, click the EIPs tab. Click Bind EIP. |
400 |
BCS.4001010 |
Failed to download the BCS certificate because the etcd connection is abnormal. |
Failed to download the BCS certificate because the etcd connection is abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001011 |
Operation failed. The service does not exist or has been deleted. Refresh the page. |
Operation failed. The service does not exist or has been deleted. Refresh the page. |
Wait for a few moments and refresh the page. |
400 |
BCS.4001015 |
Failed to obtain the peer information because the etcd connection is abnormal. |
Failed to obtain the peer information because the etcd connection is abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001018 |
Operation failed. A service with the same name already exists. Enter another name and try again. |
Operation failed. A service with the same name already exists. Enter another name and try again. |
Change the service name and try again. |
400 |
BCS.4001019 |
Failed to obtain the image version for upgrade because the required image is not in the image repository or the version configuration is incorrect. |
Failed to obtain the image version for upgrade because the required image is not in the image repository or the version configuration is incorrect. |
Check the service version configuration and ensure that the image required for the upgrade is in the image repository. |
400 |
BCS.4001020 |
Operation failed. The service status is abnormal or the service is being processed. Try again later. |
Operation failed. The service status is abnormal or the service is being processed. Try again later. |
Try again later. |
400 |
BCS.4001021 |
Failed to add the peer to the channel because the CCE API, cluster status, or etcd connection is abnormal. |
Failed to add the peer to the channel because the CCE API, cluster status, or etcd connection is abnormal. |
Log in to the CCE console and check whether CCE is normal. If CCE is normal, choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service and check whether the cluster status is normal. If the cluster is abnormal, try again after the cluster is restored. Alternatively, use a normal cluster to create another BCS service. Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001025 |
Invalid EIP. The EIP may have been unbound from the cluster. Check the EIP binding of the cluster. |
Invalid EIP. The EIP may have been unbound from the cluster. Check the EIP binding of the cluster. |
Log in to the CCE console, choose Resource Management > Clusters, and click the cluster corresponding to the service. Check whether the cluster nodes have been bound with EIPs. If not, bind EIPs to the cluster nodes. |
400 |
BCS.4001026 |
Failed to save the EIP to etcd because the etcd connection is abnormal. |
Failed to save the EIP to etcd because the etcd connection is abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001027 |
Failed to update the EIP information in the consortium member configuration because the CCE API, cluster status, or etcd connection is abnormal. |
Failed to update the EIP information in the consortium member configuration because the CCE API, cluster status, or etcd connection is abnormal. |
Log in to the CCE console and check whether CCE is normal. If CCE is normal, choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service and check whether the cluster status is normal. If the cluster is abnormal, try again after the cluster is restored. Alternatively, use a normal cluster to create another BCS service. Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001030 |
Operation failed because the etcd connection check failed. |
Operation failed because the etcd connection check failed. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001031 |
Failed to query the member details because the etcd connection is abnormal. |
Failed to query the member details because the etcd connection is abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001032 |
You do not have the required permission. |
You do not have the required permission. |
Configure the permissions by following the instructions provided in BCS User Guide > Service Deployment > Prerequisites. |
400 |
BCS.4001033 |
Failed to delete the member information because the etcd connection is abnormal. |
Failed to delete the member information because the etcd connection is abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001036 |
Operation failed. The notification does not exist. Refresh the page. |
Operation failed. The notification does not exist. Refresh the page. |
Refresh the page later. |
400 |
BCS.4001040 |
Failed to decline the invitation for joining a channel. Refresh the page and check the invitation status later. |
Failed to decline the invitation for joining a channel. Refresh the page and check the invitation status later. |
Refresh the page and check the invitation status later. |
400 |
BCS.4001042 |
Failed to query the member information because the etcd connection is abnormal. |
Failed to query the member information because the etcd connection is abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001043 |
Failed to modify the member information because the etcd connection is abnormal. |
Failed to modify the member information because the etcd connection is abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001044 |
Failed to accept the invitation. The acceptance is being processed. Refresh the page and check the invitation status later. |
Failed to accept the invitation. The acceptance is being processed. Refresh the page and check the invitation status later. |
Refresh the page later to view the processing result. |
400 |
BCS.4001045 |
Weak password. |
Weak password. |
Enter a strong password. |
400 |
BCS.4001047 |
Failed to modify the etcd data because the etcd connection is abnormal. |
Failed to modify the etcd data because the etcd connection is abnormal. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001048 |
Failed to change the password because the CCE cluster is abnormal. |
Failed to change the password because the CCE cluster is abnormal. |
Log in to the CCE console and choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service and check whether the cluster nodes are normal. If they are abnormal, rectify the fault by referring to the CCE troubleshooting guide. After the cluster restores, try again. If the cluster nodes have been deleted, buy nodes and create a BCS service again. |
400 |
BCS.4001049 |
Operation failed. The cluster status is abnormal. Check the cluster status and try again. |
Operation failed. The cluster status is abnormal. Check the cluster status and try again. |
Log in to the CCE console and choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service and check whether the cluster nodes are normal. If they are abnormal, rectify the fault by referring to the CCE troubleshooting guide. After the cluster restores, try again. If the cluster nodes have been deleted, buy nodes and create a BCS service again. |
400 |
BCS.4001050 |
Scaling failed because the CCE API or the cluster status is abnormal. |
Scaling failed because the CCE API or the cluster status is abnormal. |
Log in to the CCE console and check whether CCE is normal. If CCE is normal, choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service and check whether the cluster status is normal. If the cluster is abnormal, try again after the cluster is restored. Alternatively, use a normal cluster to create another BCS service. |
400 |
BCS.4001051 |
Scaling failed due to incorrect request parameters. Check whether the number of peers in the organization has reached the limit (5). |
Scaling failed due to incorrect request parameters. Check whether the number of peers in the organization has reached the limit (5). |
Ensure that the number of peers in each organization does not exceed the upper limit (5) and try again. |
400 |
BCS.4001052 |
Operation failed because it timed out. |
Operation failed because it timed out. |
View the result later. |
400 |
BCS.4001053 |
Failed to query the network storage because the CCE API or the cluster status is abnormal. |
Failed to query the network storage because the CCE API or the cluster status is abnormal. |
Log in to the CCE console and check whether CCE is normal. If CCE is normal, choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service and check whether the cluster status is normal. If the cluster is abnormal, try again after the cluster is restored. Alternatively, use a normal cluster to create another BCS service. |
400 |
BCS.4001054 |
Failed to add the peer to the channel because the CCE cluster status or etcd connection is abnormal. |
Failed to add the peer to the channel because the CCE cluster status or etcd connection is abnormal. |
Log in to the CCE console and check whether CCE is normal. Choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service and check whether the cluster status is normal. If the cluster is abnormal, try again after the cluster is restored. Alternatively, use a normal cluster to create another BCS service. Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001058 |
Failed to delete the member information because the etcd connection may be abnormal. |
Failed to delete the member information because the etcd connection may be abnormal. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001062 |
The maximum number of tenants that can be invited has been reached. |
The maximum number of tenants that can be invited has been reached. |
Do not invite more tenants after the invitation limit has been reached. |
400 |
BCS.4001063 |
The maximum number of invitation notifications that can be received has been reached. |
The maximum number of invitation notifications that can be received has been reached. |
Log in to the BCS console, go to the Notification Management page, and check whether the number of received invitations reaches the upper limit (100). Process the received notifications. |
400 |
BCS.4001067 |
Failed to delete the notification. The etcd connection may be abnormal. |
Failed to delete the notification. The etcd connection may be abnormal. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001069 |
The chaincode is being instantiated. Try again later. |
The chaincode is being instantiated. Try again later. |
Log in to the Chaincode Management page of the corresponding service to check the chaincode instantiation status. After the instantiation is complete, perform the operation again. |
400 |
BCS.4001078 |
Failed to query the channel information because the etcd connection may be abnormal. |
Failed to query the channel information because the etcd connection may be abnormal. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001080 |
Operation failed because the CCE cluster information failed to be obtained. |
Operation failed because the CCE cluster information failed to be obtained. |
Check if CCE is normal by trying to log in to the CCE console. If the login is successful, choose Resource Management > Clusters to check whether the cluster used by the service is normal. If the cluster is abnormal, try again after it restores. |
400 |
BCS.4001081 |
Failed to obtain the invitee's organization because the etcd is abnormal. |
Failed to obtain the invitee's organization because the etcd is abnormal. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001086 |
Permission verification failed. |
Permission verification failed. |
Configure the permissions by following the instructions provided in BCS User Guide > Service Deployment > Prerequisites. |
400 |
BCS.4001088 |
Operation failed due to insufficient quota. Increase the quota and try again. |
Operation failed due to insufficient quota. Increase the quota and try again. |
Contact the administrator to increase the quota on ManageOne. |
400 |
BCS.4001089 |
Deletion failed. Failed to delete the BCS information. |
Deletion failed. Failed to delete the BCS information. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001090 |
Operation failed. No node is available in the cluster. Try again later. |
Operation failed. No node is available in the cluster. Try again later. |
Check whether the node is abnormal or has been deleted. Log in to the CCE console. Choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service and check whether the cluster has nodes. If not, the nodes may have been deleted. In this case, buy nodes and create a BCS service again. If the nodes are abnormal, restore the nodes as instructed by the CCE troubleshooting document and try again later. |
400 |
BCS.4001095 |
Failed to delete block configurations due to etcd exceptions. |
Failed to delete block configurations due to etcd exceptions. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001096 |
Failed to delete the AgentConfig information due to etcd exceptions. |
Failed to delete the AgentConfig information due to etcd exceptions. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001097 |
Failed to delete the CCE cluster occupation information due to etcd exceptions. |
Failed to delete the CCE cluster occupation information due to etcd exceptions. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001098 |
Failed to delete the SDK information due to etcd exceptions. |
Failed to delete the SDK information due to etcd exceptions. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001099 |
Failed to delete the channel information due to etcd exceptions. |
Failed to delete the channel information due to etcd exceptions. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001100 |
Failed to delete the EIP information due to etcd exceptions. |
Failed to delete the EIP information due to etcd exceptions. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001101 |
Failed to delete the port information due to etcd exceptions. |
Failed to delete the port information due to etcd exceptions. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001102 |
Failed to delete the ipmapping information due to etcd exceptions. |
Failed to delete the ipmapping information due to etcd exceptions. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001104 |
Failed to delete the deployment template because the CCE cluster status may be abnormal. |
Failed to delete the deployment template because the CCE cluster status may be abnormal. |
Check the CCE cluster status. Log in to the CCE console and choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service and check whether the cluster status is normal. If the cluster is abnormal, restore the cluster as instructed by the CCE User Guide and then try again. |
400 |
BCS.4001105 |
Deleting the deployment template timed out because the CCE cluster status may be abnormal. |
Deleting the deployment template timed out because the CCE cluster status may be abnormal. |
Check the CCE cluster status. Log in to the CCE console and choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service and check whether the cluster status is normal. If the cluster is abnormal, restore the cluster as instructed by the CCE User Guide and then try again. |
400 |
BCS.4001106 |
Operation failed. The cluster does not exist. Try again later. |
Operation failed. The cluster does not exist. Try again later. |
Log in to the CCE console and choose Resource Management > Clusters. Check if the cluster used by the BCS service exists. If the cluster does not exist, create a cluster and buy a BCS service again. |
400 |
BCS.4001109 |
Operation failed. Failed to obtain the peer organization status. Try again later. |
Operation failed. Failed to obtain the peer organization status. Try again later. |
Try again later. |
400 |
BCS.4001110 |
Failed to create CertBitConf because the network may be faulty. |
Failed to create CertBitConf because the network may be faulty. |
Try again later. |
400 |
BCS.4001120 |
Failed to delete the service. The member failed to exit the consortium. The cluster or etcd connection is abnormal. |
Failed to delete the service. The member failed to exit the consortium. The cluster or etcd connection is abnormal. |
Log in to the CCE console and check whether CCE is normal. Choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service and check whether the cluster status is normal. If the cluster is abnormal, try again after the cluster is restored. Alternatively, use a normal cluster to create another BCS service. Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001123 |
Failed to delete the service because the cluster has been hibernated. |
Failed to delete the service because the cluster has been hibernated. |
Wake up the cluster and try again. Log in to the CCE console and choose Resource Management > Clusters. Locate the cluster used by the service, choose More > Wake. After the cluster status is restored, delete the BCS service again. |
400 |
BCS.4001130 |
Failed to save the node and port information because the etcd, CCE API, or cluster is abnormal. |
Failed to save the node and port information because the etcd, CCE API, or cluster is abnormal. |
Log in to the CCE console and check whether CCE is normal. Choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service and check whether the cluster status is normal. If the cluster is abnormal, try again after the cluster is restored. Alternatively, use a normal cluster to create another BCS service. Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001133 |
Failed to save the channel information because etcd may be abnormal. |
Failed to save the channel information because etcd may be abnormal. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001134 |
Failed to save the BCS information because etcd may be abnormal. |
Failed to save the BCS information because etcd may be abnormal. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001135 |
Failed to save the certificate because etcd may be abnormal. |
Failed to save the certificate because etcd may be abnormal. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001136 |
Failed to save bitconf because etcd may be abnormal. |
Failed to save bitconf because etcd may be abnormal. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001137 |
Failed to save the deployment template because etcd may be abnormal. |
Failed to save the deployment template because etcd may be abnormal. |
Check the etcd status. If etcd is abnormal, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001149 |
Failed to query the cluster details because the CCE service or API is abnormal. |
Failed to query the cluster details because the CCE service or API is abnormal. |
Check the CCE service and API status. Log in to the CCE console and check whether CCE is normal. If CCE is normal, choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service and check whether the cluster status is normal. If the cluster is abnormal, try again after the cluster is restored. Alternatively, use a normal cluster to create another BCS service. |
400 |
BCS.4001161 |
Failed to add the organization because the etcd connection or CCE API may be abnormal. |
Failed to add the organization because the etcd connection or CCE API may be abnormal. |
Log in to the CCE console and check whether CCE is normal. If CCE is normal, choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service and check whether the cluster status is normal. If the cluster is abnormal, try again after the cluster is restored. Alternatively, use a normal cluster to create another BCS service. Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001171 |
Weak password. |
Weak password. |
Enter a strong password. |
400 |
BCS.4001196 |
Operation failed because the current service or services in the consortium are being updated. Try again later. |
Operation failed because the current service or services in the consortium are being updated. Try again later. |
Try again later. |
400 |
BCS.4001202 |
Deletion failed. The service does not exist or has already been deleted. Refresh the page. |
Deletion failed. The service does not exist or has already been deleted. Refresh the page. |
Refresh the Service Management page. |
400 |
BCS.4001203 |
Operation failed. Failed to obtain the deployment task. |
Operation failed. Failed to obtain the deployment task. |
Try again. |
400 |
BCS.4001212 |
Operation failed. The ECS specified by node_flavor in the request cannot be purchased. |
Operation failed. The ECS specified by node_flavor in the request cannot be purchased. |
Specify an ECS with other flavors in the node_flavor. |
400 |
BCS.4001234 |
Operation failed because the BCS service is in the Hibernating or Frozen state. |
Operation failed because the BCS service is in the Hibernating or Frozen state. |
Click More > Wake in the Operation column of the row containing the specified service and try again after the service is normal. |
400 |
BCS.4001242 |
Failed to remove the organization from a channel. |
Failed to remove the organization from a channel. |
Remove the organization again until the channel and service statuses are normal. |
400 |
BCS.4001301 |
Failed to query the ROMA instance information because the ROMA instance may have been deleted or its status is abnormal. |
Failed to query the ROMA instance information because the ROMA instance may have been deleted or its status is abnormal. |
Log in to the ROMA console and check whether the instance status is normal. Wait until the instance status is normal or use an unused, normal instance. |
400 |
BCS.4001302 |
Failed to query the cluster information because the cluster has been deleted or is abnormal. |
Failed to query the cluster information because the cluster has been deleted or is abnormal. |
Log in to the CCE console and check whether CCE is normal. If CCE is normal, choose Resource Management > Clusters. If the cluster corresponding to the BCS service does not exist, the cluster has been deleted. In this case, use an existing, normal cluster to buy a BCS service again. If the cluster exists, check whether the cluster status is normal. If the cluster is abnormal, try again after the cluster is restored or use a normal cluster to create another BCS service. |
400 |
BCS.4001304 |
Failed to query the ROMA instance list because the ROMA MQS API is abnormal. |
Failed to query the ROMA instance list because the ROMA MQS API is abnormal. |
Log in to the ROMA console and check whether ROMA MQS and the ROMA instance is normal. If they are abnormal, try again after they are normal or rectify the fault as instructed by the ROMA troubleshooting document. |
400 |
BCS.4001305 |
Failed to obtain the topic information of the ROMA instance because the ROMA instance is abnormal or has been deleted. |
Failed to obtain the topic information of the ROMA instance because the ROMA instance is abnormal or has been deleted. |
Log in to the ROMA console to check whether the ROMA instance used by the BCS service is normal. If it is abnormal, try again after it is normal. If the instance is deleted, purchase a new ROMA instance and create a BCS service again. |
400 |
BCS.4001306 |
Operation failed because the ROMA instance is currently in use. |
Operation failed because the ROMA instance is currently in use. |
Select an unused, normal ROMA instance. |
400 |
BCS.4001307 |
Operation failed because you do not have the permissions to view DMS data. Check your permissions in IAM. |
Operation failed because you do not have the permissions to view DMS data. Check your permissions in IAM. |
Check the account permissions in IAM. For details about the required permissions, see the user guide. Add the DMS permissions and try again. |
400 |
BCS.4001356 |
Operation failed. No network storage space has been configured for the cluster. |
Operation failed. No network storage space has been configured for the cluster. |
Buy a BCS service again. When configuring Network Storage, choose Create SFS File System. |
400 |
BCS.4001401 |
Failed to update the IPMapping information of the current tenant because etcd, the CCE API, or the cluster is abnormal. |
Failed to update the IPMapping information of the current tenant because etcd, the CCE API, or the cluster is abnormal. |
Log in to the CCE console and choose Resource Management > Clusters. Locate the cluster used by the BCS service, and check whether the cluster is normal. If the cluster is abnormal, rectify the fault by referring to the CCE troubleshooting document or use an available cluster to buy another BCS service. If the cluster status is normal, choose Configuration Center > ConfigMaps. Filter the configuration items by cluster, find the IPMapping of the cluster corresponding to the BCS service, and check whether the configuration is correct and whether the format is complete. If no fault if found in the preceding steps, rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001402 |
Failed to update the access address because the EIP information in the SDK configuration fails to be updated due to an etcd exception. |
Failed to update the access address because the EIP information in the SDK configuration fails to be updated due to an etcd exception. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001404 |
Failed to update the EIP information of other consortium members because etcd may be abnormal. |
Failed to update the EIP information of other consortium members because etcd may be abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001407 |
Try again or check whether ETCD is normal. |
Obtain EIP data failed. |
Try again or check whether ETCD is normal. |
400 |
BCS.4001408 |
Do not use the domain name repeatedly. Apply for a new domain name or add a new domain name resolution set. |
The domain name has been used in other BCS instances. |
Do not use the domain name repeatedly. Apply for a new domain name or add a new domain name resolution set. |
400 |
BCS.4001520 |
Failed to obtain the topology information of the invitee because etcd may be abnormal. |
Failed to obtain the topology information of the invitee because etcd may be abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001521 |
Failed to obtain the topology information of the inviting party because etcd may be abnormal. |
Failed to obtain the topology information of the inviting party because etcd may be abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001708 |
Operation failed. The IP address of the IEF node cluster is incorrect. |
Operation failed. The IP address of the IEF node cluster is incorrect. |
|
400 |
BCS.4001717 |
Operation failed. The number of IEF nodes is less than that required by the consensus policy. |
Operation failed. The number of IEF nodes is less than that required by the consensus policy. |
Buy IEF nodes required by the consensus policy or buy more such nodes. |
400 |
BCS.4001750 |
Failed to query the quota from ManageOne because the ManageOne API may be abnormal. |
Failed to query the quota from ManageOne because the ManageOne API may be abnormal. |
Check the ManageOne API status. Log in to ManageOne and go to the quota management page. If the displayed page shows the service quotas in the specified region, the ManageOne API is normal. If the ManageOne API is abnormal, try again after it restores. |
400 |
BCS.4001751 |
The BCS service quota is not found because the quota is not registered or the quota configuration is incorrect. |
The BCS service quota is not found because the quota is not registered or the quota configuration is incorrect. |
Log in to ManageOne and go to the quota management page. If the displayed page shows the BCS quota in the specified region, the BCS quota has been registered correctly. Otherwise, the BCS quota has not been registered or the quota configuration is incorrect. In this case, contact the administrator to register the BCS quota again. |
400 |
BCS.4001752 |
Failed to modify the quota on ManageOne because the ManageOne API may be abnormal. |
Failed to modify the quota on ManageOne because the ManageOne API may be abnormal. |
Check the ManageOne API status. Log in to ManageOne and go to the quota management page. If the displayed page shows the service quotas in the specified region, the ManageOne API is normal. If the ManageOne API is abnormal, try again after it restores. |
400 |
BCS.4001753 |
Failed to query the product from ManageOne because the product does not exist, the product information is abnormal, or the ManageOne API is abnormal. |
Failed to query the product from ManageOne because the product does not exist, the product information is abnormal, or the ManageOne API is abnormal. |
Check the ManageOne API status and the product information. Log in to ManageOne and go to the quota management page. If the displayed page shows the service quotas in the specified region, the ManageOne API is normal. Then, check the BCS information. If the BCS information is missing, contact the administrator to register BCS. If the page is not displayed properly, the ManageOne API is abnormal. In this case, try again after it restores. |
400 |
BCS.4001754 |
This operation cannot be performed on the order because the order parameters do not exist. |
This operation cannot be performed on the order because the order parameters do not exist. |
Buy a BCS service again. |
400 |
BCS.4001755 |
Failed to save the order parameters because etcd may be abnormal. |
Failed to save the order parameters because etcd may be abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4001756 |
The order processing cannot proceed because the order parameters have changed. |
The order processing cannot proceed because the order parameters have changed. |
Buy a BCS service again. |
400 |
BCS.4001757 |
Operation verification failed. Only create and delete operations are supported. |
Operation verification failed. Only create and delete operations are supported. |
Check whether the operation is creation or deletion. |
400 |
BCS.4001999 |
Failed to accept the invitation. Refresh the page and check the invitation status later. |
Failed to accept the invitation. Refresh the page and check the invitation status later. |
Refresh the page and check the invitation status later. |
400 |
BCS.4003007 |
No authorization from CCE. |
No authorization from CCE. |
Obtain authorization on the CCE console. |
400 |
BCS.4004001 |
You cannot select EVS storage because the CCE cluster version is earlier than 1.15. |
You cannot select EVS storage because the CCE cluster version is earlier than 1.15. |
Log in to the CCE console, choose Resource Management > Clusters, click the cluster where the BCS service is deployed, and check whether the cluster version is later than 1.15. If the cluster version is earlier than 1.15, create another cluster whose version is later than 1.15. If CCE does not support clusters whose version is later than 1.15, contact CCE support personnel. |
400 |
BCS.4004002 |
EVS storage is not supported. |
EVS storage is not supported. |
Log in to CloudAutoDeploy-CDK, select a region, and choose Cloud Service Management > Upgrade. Select the cluster where the BCS service is deployed and select the baas-service pod for upgrade. Change the value of evs_service_enable to true, and perform the upgrade. Wait until the upgrade is complete. |
400 |
BCS.4004003 |
You cannot select EVS storage because the EVS disk and the CCE node are located in different AZs. |
You cannot select EVS storage because the EVS disk and the CCE node are located in different AZs. |
Log in to the CCE console, choose Resource Management > Clusters, and click the cluster where the BCS service is deployed. Then, choose Nodes in the navigation pane, and view the AZs configured for the nodes. Choose Storage in the navigation pane, click the EVS tab, and click Buy EVS Disk. Check whether the AZ of the EVS disk is the same as that of the cluster nodes. If they are different, purchase another CCE cluster in the same AZ as the EVS disk. |
400 |
BCS.4004004 |
You cannot select EVS storage when the Fabric version of the BCS service is earlier than 3.0. |
You cannot select EVS storage when the Fabric version of the BCS service is earlier than 3.0. |
Set the Fabric version of the BCS service to 3.0 or later. |
400 |
BCS.4004005 |
You cannot change the billing mode of the BCS service to yearly/monthly because the BCS service uses EVS storage. |
You cannot change the billing mode of the BCS service to yearly/monthly because the BCS service uses EVS storage. |
BCS services billed in the yearly/monthly mode do not support EVS storage. You can use SFS file systems instead. |
400 |
BCS.4004006 |
Failed to query the EVS type. |
Failed to query the EVS type. |
Check whether the network is normal. Manually run the curl command with the EVS domain name. If the domain name cannot be accessed, contact the DNS service personnel. Log in to the EVS console, click Buy Disk, and check whether an error message is displayed. If an error message is displayed, contact the EVS O&M personnel. Check whether the back-end service of BCS is normal. If the back-end service is abnormal, view the corresponding logs. |
400 |
BCS.400402 |
Query failed. |
Query failed. |
Check the entity type in the input parameter. |
400 |
BCS.4004022 |
Failed to query the monitoring data because the AOM API may be abnormal. Check whether the AOM service is normal and whether the AOM monitoring API can be accessed. |
Failed to query the monitoring data because the AOM API may be abnormal. Check whether the AOM service is normal and whether the AOM monitoring API can be accessed. |
Check whether the AOM service is normal and whether the AOM monitoring API can be accessed. |
400 |
BCS.4004025 |
Invalid request information. |
Invalid request information. |
Check the request information and ensure that it is correct. |
400 |
BCS.4004029 |
Query failed. |
Query failed. |
Check the input parameters and try again. |
400 |
BCS.4006005 |
Failed to query the BCS service because the etcd connection may be abnormal. |
Failed to query the BCS service because the etcd connection may be abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4006007 |
Failed to submit the request because no EIP is bound to the CCE cluster or the EIP fails to be queried. |
Failed to submit the request because no EIP is bound to the CCE cluster or the EIP fails to be queried. |
Log in to the CCE console. Choose Resource Management > Nodes. Locate the node corresponding to the BCS service and check whether the EIP is bound. For a private blockchain, at least one node must be bound with an EIP. For a consortium blockchain, all nodes must be bound with EIPs. Perform the following steps to bind an EIP: On the node details page, click the node name. On the displayed ECS console, click the ECS name. On the ECS details page, click the EIPs tab. Click Bind EIP. The Bind EIP dialog box is displayed. |
400 |
BCS.4006009 |
Failed to download the SDK configuration because the etcd connection or the CCE cluster status is abnormal. |
Failed to download the SDK configuration because the etcd connection or the CCE cluster status is abnormal. |
Log in to the CCE console and check whether CCE is normal. If CCE is normal, choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service, and check whether the cluster status is normal and whether the cluster has available nodes. If the cluster is abnormal, try again after the cluster is restored. Alternatively, use a normal cluster to create another BCS service. Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4006012 |
Failed to create the channel because the etcd connection or the CCE cluster status is abnormal. |
Failed to create the channel because the etcd connection or the CCE cluster status is abnormal. |
Log in to the CCE console and check whether CCE is normal. If CCE is normal, choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service, and check whether the cluster status is normal and whether the cluster has available nodes. If the cluster is abnormal, try again after the cluster is restored. Alternatively, use a normal cluster to create another BCS service. Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4006013 |
Failed to update the BCS service instance information because the etcd connection is abnormal. |
Failed to update the BCS service instance information because the etcd connection is abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4006017 |
Failed to upgrade the BCS service because the etcd connection or the CCE cluster status is abnormal. |
Failed to upgrade the BCS service because the etcd connection or the CCE cluster status is abnormal. |
Log in to the CCE console and check whether CCE is normal. If CCE is normal, choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service, and check whether the cluster status is normal and whether the cluster has available nodes. If the cluster is abnormal, try again after the cluster is restored. Alternatively, use a normal cluster to create another BCS service. Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4006018 |
Failed to query data because the etcd connection is abnormal. |
Failed to query data because the etcd connection is abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4006019 |
Failed to change the password because the etcd connection, the CCE configuration update API, or the cluster status is abnormal. |
Failed to change the password because the etcd connection, the CCE configuration update API, or the cluster status is abnormal. |
Log in to the CCE console and check whether CCE is normal. If CCE is normal, choose Resource Management > Clusters. Locate the cluster corresponding to the BCS service and check whether the cluster status is normal. If the cluster is abnormal, try again after the cluster is restored. Alternatively, use a normal cluster to create another BCS service. Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4006025 |
Invitation failed because the tenant has already been invited or the etcd connection is abnormal. |
Invitation failed because the tenant has already been invited or the etcd connection is abnormal. |
Go to the Member Management page on the BCS console to check whether the tenant invitation information exists. If the invitation exists, the tenant has been invited and cannot be invited again. Wait for the invited tenant to reply. If the invitation does not exist, the etcd connection may be abnormal. In this case, proceed to the next step. Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4006026 |
Some invitations failed because the etcd connection is abnormal. |
Some invitations failed because the etcd connection is abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4006027 |
Failed to list the members because the etcd connection is abnormal. |
Failed to list the members because the etcd connection is abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4006032 |
Failed to download the SDK configuration. The OrderEIP is empty because the etcd connection may be abnormal. |
Failed to download the SDK configuration. The OrderEIP is empty because the etcd connection may be abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4006034 |
Failed to obtain the notification information because the etcd connection is abnormal. |
Failed to obtain the notification information because the etcd connection is abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4006036 |
Failed to generate the organization certificate because the etcd connection is abnormal. |
Failed to generate the organization certificate because the etcd connection is abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4006037 |
Failed to send the event information because the AOM API or the network connection is abnormal. |
Failed to send the event information because the AOM API or the network connection is abnormal. |
Log in to the AOM console to check whether AOM is normal and whether related information is reported. If AOM is abnormal, events can be reported only after AOM is restored. If AOM APIs are normal, the network connection may not be stable. Try again later. |
400 |
BCS.4006038 |
Failed to update the notification information because the etcd connection is abnormal. |
Failed to update the notification information because the etcd connection is abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4006039 |
Failed to submit the request because the cluster is in use. |
Failed to submit the request because the cluster is in use. |
Select an unused cluster and try again. |
400 |
BCS.4006040 |
Failed to save the member information because the etcd connection is abnormal. |
Failed to save the member information because the etcd connection is abnormal. |
Rectify the etcd fault by referring to the BCS Troubleshooting document and try again after etcd is normal. |
400 |
BCS.4006041 |
Failed to delete the notification because finished notifications cannot be deleted. |
Failed to delete the notification because finished notifications cannot be deleted. |
Do not delete finished notifications. |
400 |
BCS.4009100 |
System error. Check the system or network status. |
System error. Check the system or network status. |
Switch from the BCS console to other service consoles, such as the CCE console. If multiple services are abnormal, the fault is caused by a common component fault in the environment. After the fault is rectified, try again. If only BCS is abnormal, the BCS backend node may be faulty. In this case, rectify the fault by following the instructions provided in "BCS Node Fault" in the BCS Emergency Plan. |
400 |
BCS.4009101 |
The request URL does not exist. Check whether the URL has been registered. |
The request URL does not exist. Check whether the URL has been registered. |
Log in to the API registration page on DMK. Find BCS APIs, and check whether the API for performing the specified operation exists in the list. If it does not exist, register the API as instructed by the API Gateway document contained in the BCS installation package. |
400 |
BCS.4009102 |
Internal system error. Check the system status or network status. |
Internal system error. Check the system status or network status. |
Switch from the BCS console to other service consoles, such as the CCE console. If multiple services are abnormal, the fault is caused by a common component fault in the environment. After the fault is rectified, try again. If only BCS is abnormal, the BCS backend node may be faulty. In this case, rectify the fault by following the instructions provided in "BCS Node Fault" in the BCS Emergency Plan. |
400 |
BCS.4009103 |
The maximum number (5) of invited members in the channel has been reached. |
The maximum number (5) of invited members in the channel has been reached. |
Do not exceed the maximum number of members that can be invited to each channel. |
401 |
BCS.4010401 |
Permission verification failed. |
Permission verification failed. |
Configure the permissions by following the instructions provided in BCS User Guide > Service Deployment > Prerequisites. |
403 |
BCS.4030403 |
Insufficient permissions. |
Insufficient permissions. |
Configure the permissions by following the instructions provided in BCS User Guide > Service Deployment > Prerequisites. |
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot
