ALM-303046672 POE电源异常 告警解释 POE/4/POEPWABSENT: OID [OID] POE Power is absent.(FrameID = [INTEGER], SlotID = [INTEGER]) 当POE设备上没有POE电源正常工作时会发出此告警。

查看更多 →

ALM-3276800021 RTC故障 68082 告警解释 SRM/3/ENTITYINVALID: OID [OID] RTC abnormal. (EntityPhysicalIndex=[INTEGER1], BaseTrapSeverity=[INTEGER2], B

查看更多 →

ALM-3276800031 卡失败告警 告警解释 ENTITYTRAP/2/CARDFAIL: OID [OID] Card fails. (Index=[INTEGER], EntityPhysicalIndex=[INTEGER], PhysicalName="[OCTET]"

查看更多 →

ALM-3276800063 ACL资源过载 告警解释 ACLE/4/ACL_RULERESLACK_TRAP:OID [OID] The rule resource usage has exceeded [INTEGER]%. (Slot=[OCTET], Stage=[OCTET])

查看更多 →

ALM-3276800066 篡改攻击通告 告警解释 WLAN/4/STA_TAMPER_ATTACK: OID [OID] Tamper attack notify.(APMAC=[OPAQUE],APMAC=[OPAQUE],RadioID=[INTEGER],StaMac=[OPAQUE]

查看更多 →

ALM-3276800108 用户报文异常 告警解释 SECE/4/USERABNORMAL: OID [OID] The rate of packets received by a board exceeds the average rate. (board=[OCTET], UserIp=[OCTET]

查看更多 →

ALM-3276800110 LLDP全局使能 告警解释 LLDP/4/ENABLETRAP: OID [OID] Global LLDP is enabled. LLDP全局使能时通知网管系统。 该告警不受告警时延的限制。 告警属性 告警ID 告警级别 告警类型 3276800110

查看更多 →

ALM-3276800116 终端干扰告警 告警解释 WLAN/4/STA_INTERFERENCE: OID [OID] Jam of station is detected notify.(APMAC=[OPAQUE], RadioID=[INTEGER], APName=[OCTET]

查看更多 →

ALM-3276800122 非法设备告警 告警解释 WLAN/4/WIDS_DETECT_ROGUE_DEVICE:OID [OID] Detected rogue devices. (Device count=[INTEGER]) 非法设备告警。 告警属性 告警ID 告警级别

查看更多 →

ALM-3276800123 攻击设备告警 告警解释 WLAN/4/WIDS_DETECT_ATTACK:OID [OID] Detected attack devices. (Device count=[INTEGER]) 攻击设备告警。 告警属性 告警ID 告警级别 告警类型

查看更多 →

ALM-3276800130 堆叠口UP 告警解释 FSP/4/STACKPORT_UP: OID [OID] Stack-port [integer]/[integer] changes to up. 主/备/从交换机的逻辑堆叠端口状态UP会触发该告警，由主交换机上报。 告警属性

查看更多 →

ALM-3276800141 设备冷启动 告警解释 SNMP/4/COLDSTART:OID [OID] coldStart. 设备冷启动。 告警属性 告警ID 告警级别 告警类型 3276800141 提示 设备告警 告警参数 参数名称 参数含义 OID 该告警所对应的MIB节点的OID号。

查看更多 →

ALM-3276800153 升级开始告警 告警解释 WLAN/4/AP_UPDATE_BEGIN:OID [OID] AP begins to update. Do not power off the AP during the upgrade. (APMAC=[OPAQUE]

查看更多 →

ALM-135462937 风扇不在位 告警解释 The fan module was removed. (EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaul

查看更多 →

ALM-135463086 输入速率告警 告警解释 Interface input flow bandwidth usage exceeded the trap threshold. (Interface=[IfIndex], BandWidthUsage=[hwIfMonito

查看更多 →

ALM-142147599 BGP连接中断 告警解释 The BGP FSM moves from a higher numbered state to a lower numbered state. (BgpPeerRemoteAddr=[PeerIpv4Ipv6Addr],

查看更多 →

ALM-157163598 MAC漂移告警 告警解释 MAC flapping detected, BdId = [BdId], Original-Port = [IfNameA], Flapping port 1 = [IfNameB], port 2 = [IfNameC].

查看更多 →

ALM-15795462 License数据损坏 告警解释 The license fails to be activated during system startup because the license data is damaged. (Position=[hwGtlPosition])

查看更多 →

ALM-15795475 POE故障告警 告警解释 POE is faulty. (PhysicalID=[PhysicalId],PhysicalName=[PhysicalName]). PoE发生故障。 告警属性 告警ID 告警级别 告警类型 15795475 紧急 设备告警

查看更多 →

ALM-15795536 光模块无效 告警解释 Optical Module is invalid. (PortId=[PortId], PortName=[PortName], FaultId=[FaultId]). 光模块无效。 告警属性 告警ID 告警级别 告警类型 15795536

查看更多 →

ALM-15859540 AP热启动 告警解释 AP hot boot. (APMAC=[APMAC], APType=[APType], APName=[APName], APOccurTime=[APOccurTime], NotifyName=[NotifyName], APID=[APID])

查看更多 →