Setting Up a Network in a VPC and Enabling Internet Access Using an EIP

Precautions

The network planning in this topic is only for your reference. Once a VPC and subnet are created, the CIDR blocks cannot be changed. Before creating VPCs, determine how many VPCs, the number of subnets, and what CIDR blocks or connectivity options you will need.

For details, see VPC and Subnet Planning Suggestions.

Operation Process

Preparations

Before creating resources such as VPCs and ECSs, you need to sign up for a HUAWEI ID, enable Huawei Cloud services, complete real-name authentication, and top up your account. Ensure that your account has sufficient balance.

1. You have created a HUAWEI ID, enabled Huawei Cloud services, and completed real-name authentication.
   If you already have a HUAWEI ID, skip this part. If you do not have a HUAWEI ID, perform the following operations to create one:

   1. Sign up for a HUAWEI ID and enable Huawei Cloud services.
   2. Complete real-name authentication.
2. You need to ensure that your account has sufficient balance. If it does not, top up your account.

Step 1: Create a VPC and Subnet

1. Go to the Create VPC page.
2. On the Create VPC page, set parameters as needed.

   In this example, you need to create a VPC and a subnet.

   Figure 2 Creating a VPC
   
   Figure 3 Setting a subnet
   

   Table 1 VPC parameters

   Parameter	Example Value	Description
   Region	CN-Hong Kong	The region where the VPC is created. Select the region nearest to you to ensure the lowest possible latency. The VPC, ECS, and EIP used in this example must be in the same region. The region cannot be changed after the VPC is created.
   Name	VPC-A	The VPC name. Set it to VPC-A. The name can be modified after VPC-A is created.
   IPv4 CIDR Block	192.168.0.0/16	The IPv4 CIDR block of VPC-A. You are advised to select from the following CIDR blocks: 10.0.0.0/8-24: The IP address ranges from 10.0.0.0 to 10.255.255.255, and the netmask ranges from 8 to 24. 172.16.0.0/12-24: The IP address ranges from 172.16.0.0 to 172.31.255.255, and the netmask ranges from 12 to 24. 192.168.0.0/16-24: The IP address ranges from 192.168.0.0 to 192.168.255.255, and the netmask ranges from 16 to 24. The IPv4 CIDR block cannot be changed after VPC-A is created.
   Enterprise Project	default	The enterprise project by which VPCs are centrally managed. Select an existing enterprise project for VPC-A. The enterprise project cannot be changed after VPC-A is created.
   Advanced Settings (Optional) > Tag	Not required	The tag that is used to classify and identify resources. Add tags to VPC-A as required. After VPC-A is created, you can edit tags added to VPC-A.
   Advanced Settings (Optional) > Description	Not required	Supplementary information about VPC-A. Enter a description as required. The description can be modified after VPC-A is created.

   Table 2 Subnet parameters

   Parameter	Example Value	Description
   AZ	AZ4	A geographic location with independent power supply and network facilities in a region. Each region contains multiple AZs. AZs are physically isolated but connected through an internal network. Subnets of a VPC can be located in different AZs without affecting communications. You can select any AZ in a region. If Edge is displayed, select an edge AZ based on your service requirements. If Edge is not displayed, you do not need to set the subnet AZ, which does not affect your service running. An ECS and its VPC can be in different AZs. For example, you can select AZ1 for the ECS and AZ3 for its VPC subnet. The AZ cannot be changed after Subnet-A01 is created. You can select an AZ for a subnet only in certain regions. See the available regions on the management console.
   Subnet Name	Subnet-A01	The subnet name. Set it to Subnet-A01. The name can be modified after Subnet-A01 is created.
   IPv4 CIDR Block	192.168.0.0/24	The IPv4 CIDR block of Subnet-A01, which is a unique CIDR block with a range of IP addresses in VPC-A. The CIDR block cannot be changed after Subnet-A01 is created.
   IPv6 CIDR Block (Optional)	Disabled	Whether to assign IPv6 addresses. You can enable or disable this option after Subnet-A01 is created.
   Associated Route Table	Default	The default route table that Subnet-A01 is associated with. Each VPC comes with a default route table. Subnets in the VPC are then automatically associated with the default route table. The default route table has a preset system route that allows subnets in a VPC to communicate with each other. After Subnet-A01 is created, you can create a custom route table and associate Subnet-A01 with it.
   Advanced Settings (Optional) > Gateway	192.168.0.1	The gateway address of Subnet-A01. You are advised to retain the default address. The gateway address cannot be changed after Subnet-A01 is created.
   Advanced Settings (Optional) DNS Server Address Domain Name NTP Server Address IPv4 DHCP Lease Time	Not required	The parameters are configured for the ECS-A01 in VPC-A. In this example, retain the default values or leave them blank. You can change the values after Subnet-A01 is created.
   Advanced Settings (Optional) > Tag	Not required	The tag that is used to classify and identify resources. Add tags to Subnet-A01 as required. After Subnet-A01 is created, you can edit the tags added to Subnet-A01.
   Advanced Settings (Optional) > Description	Not required	Supplementary information about Subnet-A01. Enter a description as required. The description can be modified after Subnet-A01 is created.

3. Click Create Now.

   You will be redirected to the VPC list, where you can find VPC-A you have created.

Step 2: Buy an ECS

1. Go to the Buy ECS page.
2. On the Buy ECS page, set parameters as required.
   In this example, set the ECS name to ECS-A01 and configure other parameters as follows:

   • Network: Select VPC-A and Subnet-A01 you have created.
     Figure 4 Network settings
     
   • Security Group: Create security group Sg-A and add inbound and outbound rules to it. Each security group comes with system rules. You need to check and modify the rules as required to ensure that all rules in Table 3 are added.
     Figure 5 Inbound rules of Sg-A
     
     Figure 6 The outbound rule of Sg-A
     

     Table 3 Sg-A rules

     Direction	Action	Type	Protocol & Port	Source/Destination	Description
     Inbound	Allow	IPv4	TCP: 22	Source: 10.1.0.7/32	Allows the local PC (10.1.0.7/32) to remotely log in to Linux ECS-A01 over SSH port 22.
     Inbound	Allow	IPv4	TCP: 3389	Source: 10.1.0.7/32	Allows the local PC (10.1.0.7/32) to remotely log in to Windows ECS-A01 over RDP port 3389.
     Inbound	Allow	IPv4	ICMP: All	Source: 0.0.0.0/0	Allows ping traffic to ECS-A01 in VPC-A over all ICMP ports to test network connectivity.
     Inbound	Allow	IPv4	All	Source: current security group (Sg-A)	Allows the ECSs in Sg-A to communicate with each other.
     Outbound	Allow	IPv4	All	Destination: 0.0.0.0/0	Allows ECS-A01 in Sg-A to access the Internet.

   • EIP: Select Not required.
     Figure 7 Selecting Not required
     

   Configure other ECS parameters s as required. For details, see Purchasing a Custom ECS.

3. Click Create.

   Return to the ECS list to view ECS-A01 you have bought.

Step 3: Buy an EIP and Bind It to ECS-A01

1. Go to the Buy EIP page.
2. On the Buy EIP page, set the EIP name to EIP-A.

   You can configure other EIP parameters as required. For details, see Buying an EIP.

3. Click Next.

   Return to the EIP list to view EIP-A you have assigned.

4. In the EIP list, locate EIP-A and click Bind in the Operation column.

   The Bind EIP dialog box is displayed.

5. In the displayed dialog box, select ECS-A01 and click OK.

   Return to the EIP list. You can see that ECS-A01 is displayed in the Associated Instance column in the EIP list.

Step 4: Test Network Connectivity

1. Use the local PC to remotely log in to ECS-A01.

   Multiple methods are available for logging in to an ECS. For details, see Logging In to an ECS.

2. Run the following command to test the network connectivity between ECS-A01 and Internet:

   ping IPv4 EIP or Domain name

   Example command:

   ping support.huaweicloud.com

   If information similar to the following is displayed, ECS-A01 can communicate with the Internet.

   [root@ecs-a01 ~]# ping support.huaweicloud.com
   PING hcdnw.cbg-notzj.c.cdnhwc2.com (203.193.226.103) 56(84) bytes of data.
   64 bytes from 203.193.226.103 (203.193.226.103): icmp_seq=1 ttl=51 time=2.17 ms
   64 bytes from 203.193.226.103 (203.193.226.103): icmp_seq=2 ttl=51 time=2.13 ms
   64 bytes from 203.193.226.103 (203.193.226.103): icmp_seq=3 ttl=51 time=2.10 ms
   64 bytes from 203.193.226.103 (203.193.226.103): icmp_seq=4 ttl=51 time=2.09 ms
   ...
   --- hcdnw.cbg-notzj.c.cdnhwc2.com ping statistics ---
   4 packets transmitted, 4 received, 0% packet loss, time 3004ms
   rtt min/avg/max/mdev = 2.092/2.119/2.165/0.063 ms