Buying and Connecting to the GaussDB Instance Using gsql

Operation Process

Preparations

1. Sign up for a HUAWEI ID and enable Huawei Cloud services.
2. Before purchasing DB instances, ensure that your account balance is sufficient. Top up your account if required.
3. For fine-grained permissions management on Huawei Cloud resources, use Identity and Access Management (IAM) to create a user or user group and grant it specific operation permissions. For details, see Creating a User and Granting Permissions.

Buying an Instance

1. Log in to the management console.
2. Click in the upper left corner and select a region and project.
3. Click in the upper left corner of the page and choose Databases > GaussDB.
4. On the Instances page, click Buy DB Instance.
5. On the displayed page, set Billing Mode, enter DB Instance Name, select Edition Type, DB Engine Version, DB Instance Type, and Deployment Model, and complete other configurations.
   Figure 1 Billing mode and basic information
   

   Table 1 Description

   Parameter	Example Value	Description
   Billing Mode	Pay-per-use	GaussDB provides yearly/monthly billing and pay-per-use billing. Yearly/Monthly: You pay upfront for the amount of time you expect to use the DB instance for. You will need to make sure you have a top-up account with a sufficient balance or have a valid payment method configured first. Pay-per-use: You can start using the DB instance first and then pay as you go. Pricing is listed on a per-hour basis, but bills are calculated based on the actual usage duration.
   Region and Project	CN-Hong Kong	Region where the tenant is located. NOTE: Products in different regions cannot communicate with each other over a private network. After the DB instance is created, you cannot change its region.
   DB Instance Name	gauss-d0a7	The instance name must start with a letter and can contain 4 to 64 characters. Only letters (case-sensitive), digits, hyphens (-), and underscores (_) are allowed.
   Edition Type	Enterprise edition	GaussDB provides Basic edition and Enterprise edition. The basic edition lacks certain advanced features that are available in the enterprise edition. The basic edition delivers the same level of performance as the enterprise edition at a more affordable price. This edition is ideal for users who prioritize cost and do not need advanced features.
   DB Engine Version	V2.0-8.103	GaussDB database version.
   DB Instance Type	centralized	Distributed: You can add nodes for distributed instances as needed to handle large volumes of concurrent requests. Centralized: Centralized instances are suitable for scenarios with small and stable volumes of data, where data reliability and service availability are extremely important.
   Deployment Model	1 primary + 2 standby	Distributed instances Independent: Database components are deployed on different nodes. This model is suitable for where high reliability and stability are required and the instance scale is large. Combined: 3-node deployment where there are one primary DN and two standby DNs. This option is available only when Edition Type is Basic edition. centralized HA (1 primary + 2 standby): 3-node deployment where there is a shard. The shard contains one primary DN and two standby DNs. Single: single-node deployment where there is only one CMS component and one DN. To create a single-replica instance, ensure that the instance version is V2.0-2.2 or later. 1 primary + 1 standby + 1 log: 3-node deployment where there is one shard with three replicas. The shard contains one primary DN, one standby DN, and one log-dedicated DN. This model is available only for instances of version V2.0-3.200 or later.
   AZ	AZ1	An AZ is a physical region where resources have their own independent power supply and networks. AZs are physically isolated but interconnected through an internal network.
   Time Zone	(UTC+08:00) Beijing, Chongqing, Hong Kong, Urumqi	You need to select a time zone for your instance based on the region it is hosted in.

6. Configure instance specifications.
   Figure 2 Specifications and storage
   

   Table 2 Parameters

   Parameter	Example Value	Description
   Instance Specifications	Dedicated(1:4), 4 vCPUs | 16 GB	The vCPUs and memory of an instance.
   Storage Type	Ultra-high I/O	The storage type determines the read/write speed of an instance. The higher the maximum throughput is, the higher the instance read/write speed can be.
   Storage Space	40GB	The storage space contains the file system overhead required for inodes, reserved blocks, and database operation.
   Disk Encryption	Disable	Enabling disk encryption improves data security, but slightly affects the read and write performance of the database. If a shared KMS key is used, the corresponding CTS event is createGrant. Only the key owner can receive this event.

7. Retain the default settings for the network information.
   Figure 3 Network configuration
   

8. Configure the instance password and enterprise project.
   Figure 4 Database configuration
   

   Table 3 Parameters

   Parameter	Example Value	Description
   Administrator Password	-	Enter a strong password and periodically change it to improve security, preventing security risks such as brute force cracking.
   Confirm Password	-	Enter the administrator password again.
   Enterprise Project	default	If the instance has been associated with an enterprise project, select the target project from the Enterprise Project drop-down list. You can also go to the Enterprise Project Management console to create a project. For details, see Enterprise Management User Guide.

9. Click Next, confirm the instance information, and click Submit.
10. Go to the instance list.

    If status of the instance becomes Available, the instance has been created.

Buying an ECS

GaussDB provides the gsql tool to help you connect to the database using the command-line interface (CLI). You need to create an ECS in advance for installing the gsql tool.

1. Log in to the management console.
2. Click Buy ECS.
3. Configure basic settings and click Next: Configure Network.
   • Region: Select the region of the GaussDB instance to be connected.
   • Billing Mode: Pay-per-use
   • AZ: Select the AZ of the GaussDB instance to be connected.
   • Image: EulerOS and EulerOS 2.5 64bit(40 GiB)
   • Retain the default values for other parameters.
   Figure 5 Basic settings
   
   Figure 6 Selecting an image
   

4. Configure the ECS network and click Next: Configure Advanced Settings.
   • Network: Select the VPC of the GaussDB instance to be connected.
   • Security Group: Select the security group of the GaussDB instance to be connected.
   • EIP: Do Not Use
   Figure 7 Network configuration
   

5. Configure a password for the ECS, set other parameters as required, and click Next: Confirm.
   • ECS Name: Enter a name that is easy to identify.
   • Password: Set a strong password to improve security.
   • Confirm Password: Enter the password again.
   • Retain the default values for other parameters.
   Figure 8 Advanced settings
   

6. Confirm the configuration and click Apply Now.
7. View the purchased ECS.

Obtaining the Driver Package

Download particular packages listed in Table 4 based on the version of your instance.

To prevent a software package from being tampered with during transmission or storage, download the corresponding verification package and perform the following steps to verify the software package:

1. Upload the software package and verification package to the same directory on a Linux VM.
2. Run the following command to verify the integrity of the software package:

   cat GaussDB_driver.zip.sha256 | sha256sum --check

   If OK is displayed in the command output, the verification is successful.

   GaussDB_driver.zip: OK

Connecting to a Database

• Non-SSL connection
  1. Log in as the root user to the ECS you have created.
  2. Upload the client tool package and configure gsql environment variables.
     1. Run the following command to create the /tmp/tools directory for storing the client tool package:

        mkdir /tmp/tools

     2. Download the GaussDB_driver.zip driver package of the required version by referring to Obtaining the Driver Package, and upload it to the /tmp/tools directory of the created ECS.
     3. Run the following commands to decompress the GaussDB_driver.zip driver package:

        cd /tmp/tools
        unzip GaussDB_driver.zip

     4. Run the following commands to copy the decompressed GaussDB-Kernel_***_EULER_64bit-Gsql.tar.gz client tool package to the /tmp/tools directory:
        

        This section uses the gsql tool package suitable for the centralized instances running on Euler2.5_x86_64 as an example. The relative path of the tool package varies depending on where you decompressed it.

        cd /tmp/tools/GaussDB_driver/Centralized/Euler2.5_X86_64/
        cp GaussDB-Kernel_***_EULER_64bit-Gsql.tar.gz /tmp/tools

     5. Run the following commands to decompress the package:

        cd /tmp/tools
        tar -zxvf GaussDB-Kernel_***_EULER_64bit-Gsql.tar.gz

     6. Configure environment variables.

        Run the following command to open the ~/.bashrc file:

        vim ~/.bashrc

        Press G to move the cursor to the last line, press i to enter Insert mode, and type the following information. Then, press Esc to exit Insert mode, and run :wq to save the settings and exit.

        export PATH=/tmp/tools/bin:$PATH
        export LD_LIBRARY_PATH=/tmp/tools/lib:$LD_LIBRARY_PATH

        Run the following command to make the environment variables take effect permanently:

        source ~/.bashrc

  3. Enter the password when prompted to connect to the database.

     After an instance is created, a postgres database is generated by default. Database postgres is used an example.

     gsql -d postgres -h 10.0.0.0 -U root -p 8000
     Password for user root:

     • postgres indicates the name of the database to be connected.
     • 10.0.0.0 indicates the IP address of the instance. On the Basic Information page of the instance to be connected, obtain the IP address in the Node List area.
     • root indicates the username used to log in to the database.
     • 8000 indicates the port number of the database. On the Basic Information page of the instance to be connected, obtain the database port in the Network Information area.

     For more information about gsql commands, see Tool Reference.

• SSL connection
  1. Log in to the management console.
  2. Click in the upper left corner and select a region and project.
  3. Click in the upper left corner of the page and choose Databases > GaussDB.
  4. On the Instances page, click the name of the target instance. In the Configuration area on the Basic Information page, click next to the SSL field to download the root certificate or certificate bundle.
  5. Upload the root certificate to the ECS or save it to the device to be connected to the GaussDB instance.

     Import the root certificate to the Linux ECS. For details, see How Can I Import the Root Certificate to a Windows or Linux OS?

  6. Connect to a GaussDB instance.
     A Linux ECS is used in this example. Run the following command to set environment variables on the ECS:

     export PGSSLMODE=<sslmode>
     export PGSSLROOTCERT=<ca-file-directory>

     gsql -h <host> -p <port> -d <database> -U <user>

     Table 5 Parameters

     Parameter	Description
     <host>	IP address of the DB instance. To obtain the IP address, click the instance name on the Instances page to go to the Basic Information page of the instance. The IP address can be found in the IP Address column of the Node List area.
     <port>	Database port in use. The default value is 8000. To obtain this parameter, go to the Basic Information page of the DB instance. The port number can be found in the Database Port field in the Network Information area.
     <database>	Name of the database (postgres by default).
     <user>	Username of the GaussDB database account. The default administrator is root.
     <ca-file-directory>	Path of the CA certificate for SSL connection.
     <sslmode>	SSL connection mode. Set it to verify-ca to use a CA to check whether the service is trusted.

     For example, to connect to a postgres database through an SSL connection as user root, run the following commands on the ECS:

     export PGSSLMODE="verify-ca"
     export PGSSLROOTCERT="/home/Ruby/ca.pem"

     gsql -d postgres -h 10.0.0.0 -U root -p 8000

     Password for user root:

     For more information about gsql commands, see Tool Reference.

  7. Check the command output after you log in to the database. If information similar to the following is displayed, the SSL connection has been established.

     SSL connection (cipher: DHE-RSA-AES256-GCM-SHA384, bits: 256)

Follow-up Operations

After logging in to the instance, you can create alarm rules, set automated backup policies, create databases, and migrate data. For details, see:

• Creating an Alarm Rule
• Setting an Automated Backup Policy
• Creating a Database Using SQL
• Creating a Database Through an API
• Managing GaussDB Databases Through DAS
• Migrating Data to GaussDB