PHP SDK User Guide

Prerequisites

• You have registered with Huawei Cloud and completed real-name authentication.
  NOTE:

  If you are a Huawei Cloud (International) user, you need to complete real-name authentication when you:

  • Purchase and use cloud services on Huawei Cloud nodes in the Chinese mainland. In this case, real-name authentication is required by the laws and regulations of the Chinese mainland.
  • Plan to use Live in regions in the Chinese mainland.
• You have obtained and added an ingest domain name and a streaming domain name (both licensed) on the Live console, and associated the domain names.
• The development environment (PHP 5.6 or later) is available.
• You have obtained the access key (AK) and secret access key (SK) of the Huawei Cloud account. You can create and view your AK and SK on the My Credentials > Access Keys page of the Huawei Cloud console. For details, see Access Keys.
• You have obtained the project ID of the corresponding region of Live. You can view the project ID on the My Credentials > API Credentials page of the Huawei Cloud console. For details, see API Credentials.

Installing an SDK

The Live server SDK supports PHP 5.6 or later. Run the php --version command to check the PHP version.

You are advised to install the SDK using Composer.

1
2
3
4

# Install Composer.
curl -sS https://getcomposer.org/installer | php 
# Install the PHP SDK.
composer require huaweicloud/huaweicloud-sdk-php

1

require 'path/to/vendor/autoload.php';

Procedure

1. Import the dependent module.

   1 2 3 4 5 6 7 8 9

   namespace HuaweiCloud\SDK\Live\V1\Model; require_once "vendor/autoload.php"; use HuaweiCloud\SDK\Core\Auth\BasicCredentials; use HuaweiCloud\SDK\Core\Http\HttpConfig; use HuaweiCloud\SDK\Core\Exceptions\ConnectionException; use HuaweiCloud\SDK\Core\Exceptions\RequestTimeoutException; use HuaweiCloud\SDK\Core\Exceptions\ServiceResponseException; // Import the specified Live library. use HuaweiCloud\SDK\Live\V1\LiveClient;

2. Configure client attributes.
   1. Use the default configuration.

      1 2	// Use the default configuration. $config = HttpConfig::getDefaultConfig();

   2. (Optional) Configure a proxy.

      1 2 3 4 5 6 7 8

      // (Optional) Use a proxy server. // There will be huge security risks if the password of the proxy server is directly written into the code. You are advised to store the password in ciphertext in the configuration file or environment variables and decrypt the password when using it. // Before configuring a proxy, specify the environment variable PROXY_PASSWORD in the local environment. $config->setProxyProtocol('http'); $config->setProxyHost('proxy.huawei.com'); $config->setProxyPort(8080); $config->setProxyUser('username'); $config->setProxyPassword(getenv('PROXY_PASSWORD'));

   3. (Optional) Configure a connection.

      1 2	// (Optional) Configure the connection timeout. The timeout can be set to timeout in a unified manner, or set to connect timeout or read timeout as required. $config->setConnectionTimeout(3);

   4. (Optional) Configure SSL.

      1 2 3 4

      # (Optional) Skip server certificate verification. $config->setIgnoreSslVerification(true); # Configure the server CA certificate so that the SDK can verify the server certificate. $config->setCertFile("{yourCertFile}");

3. Initialize authentication information.

   You can use one of the following two authentication modes:

   • Permanent AK and SK

     Obtain a permanent AK, SK, and project ID. For details, see Prerequisites.

     1	$basicCredentials = new BasicCredentials($ak,$sk,$projectId);

   • Temporary AK and SK

     Obtain a temporary AK, SK, and security token through a token or through an agency.

     1	$basicCredentials = BasicCredentials(ak, sk, projectId).withSecurityToken(securityToken);

   The related parameters are as follows:

   • ak: AK of the Huawei Cloud account. You are advised to store the AK in ciphertext in the configuration file or environment variables and decrypt it when using it.
   • sk: SK of the Huawei Cloud account. You are advised to store the SK in ciphertext in the configuration file or environment variables and decrypt it when using it.
   • project_id: ID of the project where Live is provided. Select a project ID based on the region of the project.
   • securitytoken: security token used for temporary AK and SK authentication

4. Initialize the client.

   1 2 3 4 5 6 7

   // Initialize the Live client. $client = LiveClient::newBuilder(new LiveClient) ->withHttpConfig($config) ->withEndpoint($endpoint) ->withCredentials($credentials) ->build(); $request = new CreateDomainRequest();

   endpoint: regions where Live is used and endpoints of each service. For details, see Regions and Endpoints.

5. Send a request and view the response.

   1 2 3 4

   // Initialize the request. The following uses the API for querying transcoding templates as an example. $request = new ShowTranscodingsTemplateRequest("play.example.huaweicloud.com"); $response = $client->ShowTranscodingsTemplate($request); echo $response;

6. Perform troubleshooting.

   Table 1 Troubleshooting

   Level 1	Description	Level 2	Description
   ConnectionException	Connection exception	HostUnreachableException	The network is unreachable or access is rejected.
   		SslHandShakeException	SSL authentication is abnormal.
   RequestTimeoutException	Response timeout exception	CallTimeoutException	The server fails to respond to a single request before timeout.
   		RetryOutageException	No valid response is returned after the maximum number of retries specified in the retry policy is reached.
   ServiceResponseException	Server response exception	ServerResponseException	Internal server error. HTTP response code: [500,].
   		ClientRequestException	Invalid request parameter. HTTP response code: [400, 500).

   1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

   // Perform troubleshooting. try { $response = $client->ShowTranscodingsTemplate($request); } catch (ConnectionException $e) { $msg = $e->getMessage(); echo "\n". $msg ."\n"; } catch (RequestTimeoutException $e) { $msg = $e->getMessage(); echo "\n". $msg ."\n"; } catch (ServiceResponseException $e) { echo "\n"; echo $e->getHttpStatusCode(). "\n"; echo $e->getErrorCode() . "\n"; echo $e->getErrorMsg() . "\n"; }

7. Use the listener to obtain original HTTP requests and responses.

   The original HTTP requests and responses are required for debugging HTTP requests sent by the service side. The SDK provides the listener to obtain the original and encrypted HTTP requests and responses.

   CAUTION:

   Original information is printed only during debugging. Do not print the header and body of an original HTTP request in the production system because this information contains sensitive data but is not encrypted. If the request body is binary, that is, Content-Type is set to binary, the body will be displayed as *** without the detailed content.

   1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61

   $requestHandler = function ($argsMap) { if (isset($argsMap['request'])) { $sdkRequest = $argsMap['request']; $requestHeaders = $sdkRequest->headerParams; $requestBase = "> Request " . $sdkRequest->method . ' ' . $sdkRequest->url . "\n"; if (count($requestHeaders) > 0) { $requestBase = $requestBase . '> Headers:' . "\n"; foreach ($requestHeaders as $key => $value) { $requestBase = $requestBase . ' ' . $key . ' : ' . $value . "\n"; } $requestBase = $requestBase . '> Body: ' . $sdkRequest->body . "\n\n"; } if (isset($argsMap['logger'])) { $logger = $argsMap['logger']; $logger->addDebug($requestBase); } } }; $responseHandler = function ($argsMap) { if (isset($argsMap['response'])) { $response = $argsMap['response']; $responseBase = "> Response HTTP/1.1 " . $response->getStatusCode() . "\n"; $responseHeaders = $response->getHeaders(); if (count($responseHeaders) > 0) { $responseBase = $responseBase . '> Headers:' . "\n"; foreach ($responseHeaders as $key => $value) { $valueToString = ''; if (is_array($value)) { $valueToString = ''.join($value); } $responseBase = $responseBase . ' ' . $key . ' : ' . $valueToString . "\n"; } $responseBody = $response->getBody(); $responseBase = $responseBase . '> Body: ' . (string) $responseBody . "\n\n"; } if (isset($argsMap['logger'])) { $logger = $argsMap['logger']; $logger->addDebug($responseBase); } } }; $httpHandler = new HttpHandler(); $httpHandler->addRequestHandlers($requestHandler); $httpHandler->addResponseHandlers($responseHandler); $iamClient = LiveClient::newBuilder() ->withHttpConfig($config) ->withEndpoint($endpoint) ->withCredentials(null) ->withStreamLogger($stream = 'php://stdout',$logLevel =Logger::INFO) // Print logs to the console. ->withFileLogger($logPath='./test_log.txt', $logLevel = Logger::INFO) // Print logs to a file. ->withHttpHandler($httpHandler) ->build();

Sample Code

Before the calling, replace the variables {your endpoint string} and {your project id} as needed.

There will be huge security risks if the AK and SK used for authentication are directly written into the code. You are advised to store the AK and SK in ciphertext in the configuration file or environment variables and decrypt them when using them.

In this example, the AK and SK are stored in environment variables. Before running this example, specify the environment variables HUAWEICLOUD_SDK_AK and HUAWEICLOUD_SDK_SK in the local environment.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41

<?php
namespace HuaweiCloud\SDK\Live\V1\Model;
require_once "vendor/autoload.php";
use HuaweiCloud\SDK\Core\Auth\BasicCredentials;
use HuaweiCloud\SDK\Core\Http\HttpConfig;
use HuaweiCloud\SDK\Core\Exceptions\ConnectionException;
use HuaweiCloud\SDK\Core\Exceptions\RequestTimeoutException;
use HuaweiCloud\SDK\Core\Exceptions\ServiceResponseException;
use HuaweiCloud\SDK\Live\V1\LiveClient;

$ak = getenv('HUAWEICLOUD_SDK_AK');
$sk = getenv('HUAWEICLOUD_SDK_SK');
$endpoint = "https://live.cn-north-4.myhuaweicloud.com";
$projectId = "";
$credentials = new BasicCredentials($ak,$sk,$projectId);
$config = HttpConfig::getDefaultConfig();
$config->setIgnoreSslVerification(true);

$client = LiveClient::newBuilder(new LiveClient)
  ->withHttpConfig($config)
  ->withEndpoint($endpoint)
  ->withCredentials($credentials)
  ->build();
$request = new ShowTranscodingsTemplateRequest();

try {
  $response = $client->ShowTranscodingsTemplate($request);
} catch (ConnectionException $e) {
  $msg = $e->getMessage();
  echo "\n". $msg ."\n";
} catch (RequestTimeoutException $e) {
  $msg = $e->getMessage();
  echo "\n". $msg ."\n";
} catch (ServiceResponseException $e) {
  echo "\n";
  echo $e->getHttpStatusCode(). "\n";
  echo $e->getErrorCode() . "\n";
  echo $e->getErrorMsg() . "\n";
}
echo "\n";
echo $response;