Help Center/ Direct Connect/ Getting Started/ Using Direct Connect to Connecting an On-premises Data Center to the Cloud/ Solution Overview
Updated on 2024-10-31 GMT+08:00
View PDF
Share

Solution Overview

When your on-premises network needs to communicate with a VPC, you can create a Direct Connect connection on the console to establish network connectivity between your premises and the cloud.

The telecom carrier needs to perform a site survey and lay the leased line, which takes about two or three months. Make sure that you arrange enough time for the project.

Process

Step

Description

Preparations

Before creating resources such as Direct Connect connections, VPCs, and ECSs, sigh up for a HUAWEI ID, enable cloud services, complete real-name authentication, top up your account, confirm the Direct Connect locations, confirm the port availability, complete the site survey, and confirm the prices.

Step 1: Create a Connection

Create a connection to reserve a dedicated port and work with the carrier to connect the leased line to the cloud.

In this process, there are operations of the customer, carrier, and Huawei Cloud, and operation instructions for and the status of each phase will be displayed on the console.

Step 2: Create a Virtual Gateway

You can create a virtual gateway and associate it with the VPC that you need to access.

Step 3: Create a Virtual Interface

After the connection and the gateway are ready, you need to create a virtual interface so that your network can access the VPC.

Step 4: Configure Routes

After your on-premises network is connected to Huawei Cloud, you need to configure routes on your on-premises network device.

The leased line construction process varies depending on the networking topology. The following figure shows the logic of two common networking topologies. Consult your carrier for the actual networking topology.

  • Figure 1 shows the networking topology for establishing connectivity when your on-premises equipment room is in a different campus from that at the Direct Connect location.
    Figure 1 Networking topology
  • Figure 2 shows the networking topology for establishing connectivity when your on-premises equipment room is in the same campus as that of the Direct Connect location.
    Figure 2 Networking topology