Help Center/ Host Security Service/ User Guide/ Server Protection/ WTP/ Enabling/Disabling Scheduled Static WTP
Updated on 2024-09-23 GMT+08:00

Enabling/Disabling Scheduled Static WTP

You can schedule WTP protection to allow website updates in specific periods.

Exercise caution when you set the periods to disable WTP, because files will not be protected in those periods.

Rules for Setting an Unprotected Period

  • Unprotected period >= 5 minutes
  • Unprotected period < 24 hours
  • Periods (except for those starting at 00:00 or ending at 23:59) cannot overlap and must have an at least 5-minute interval.
  • A period cannot span two days.
  • The server time is used as a local time base.

Enabling/Disabling Scheduled Static WTP

  1. Log in to the management console.
  2. In the upper left corner of the page, select a region, click , and choose Security & Compliance > HSS.
  3. Choose Server Protection > Web Tamper Protection. Click Configure Protection in the Operation column.

    If your servers are managed by enterprise projects, you can select an enterprise project to view or operate the asset and scan information.

    Figure 1 Entering the page of protection settings

  4. On the Configure Protection tab, click Settings under Scheduled Protection.
  5. Set the unprotected period and days in a week to automatically disable protection.

    Figure 2 Setting scheduled protection parameters
    1. Click Add Unprotected Period. Configure parameters in the dialog box that is displayed.
      Figure 3 Adding an unprotected period

      Configuration constraints:

      • Unprotected period >= 5 minutes
      • Unprotected period < 24 hours
      • Periods (except for those starting at 00:00 or ending at 23:59) cannot overlap and must have an at least 5-minute interval.
      • A period cannot span two days.
      • The server time is used as a time base.
    2. Click OK.
    3. Select the days to disable protection.
      For example, if you select Mon., Thu., and Sat., the server automatically disables the WTP function during the unprotected period on these days.
      Figure 4 Selecting days to disable protection
    4. Click OK.

  6. Return to the Configure Protection tab and toggle on to enable Scheduled Protection.

    Figure 5 Enabling scheduled protection