Does HUAWEI CLOUD Provide the NTP Server and How Can I Configure It?

Background

If you use the NTP server provided by HUAWEI CLOUD, you also need to use the DNS server. Table 1 lists the NTP servers provided by Huawei Cloud in different regions.

For details about how to obtain the DNS server address, see What Are the Private DNS Server Addresses Provided by Huawei Cloud?

Linux (chronyd)

The following section uses CentOS 7.3 as an example.

1. Check whether the IP address of the DNS server is correct on the ECS.
   1. Log in to the Linux ECS.
   2. Run the following command to open the resolv.conf file:

      vi /etc/resolv.conf

   3. Check whether the nameserver value in the file is the same as the IP address of the DNS server provided in What Are Huawei Cloud Private DNS Server Addresses?
      • If yes, go to step 3.
      • If no, go to step 2.

2. (Optional) Configure the DNS server for the ECS.
   1. Log in to the Linux ECS.
   2. Run the following command to edit the resolv.conf configuration file:

      vi /etc/resolv.conf

   3. Add the following statement to configure the DNS server:

      nameserver IP address of the DNS server

      Example:

      Consider the CN North region as an example. Add the following statement:

      nameserver 100.125.1.250

3. Configure the NTP server for the ECS.
   1. Log in to the Linux ECS.
   2. Run the following commands to stop the chronyd process:

      systemctl stop chronyd

      systemctl disable chronyd

   3. Run the following command to edit the chrony.conf configuration file:

      vim /etc/chrony.conf

   4. Add the following statement to configure the NTP server:

      server Domain name of the NTP server minpoll 4 maxpoll 10 iburst

      Example:

      server ntp.myhuaweicloud.com minpoll 4 maxpoll 10 iburst

   5. Run the following command to start the service upon system restart:

      For Euler and CentOS:

      systemctl restart chronyd

      For SUSE:

      service chronyd restart

      

      Run the required command based on the OS running on the ECS.

      If the message "Failed to restart chronyd.service: Unit not found." is displayed, run the yum -y install chrony command.

   6. Run the following command to check whether the time on the NTP server has been synchronized with that on the upper-layer NTP server:

      chronyc sources -v

      If "*" is displayed, the time has been synchronized.

      Figure 1 Modification result
      
      

      It takes several minutes to perform NTP time synchronization for the first time.

   7. Set the automatic startup of the chronyd service.

      For Euler and CentOS:

      systemctl enable chronyd

      For SUSE:

      chkconfig chronyd on

Linux (ntpd)

The following section uses CentOS 7.3 as an example.

1. Check whether the IP address of the DNS server is correct on the ECS.
   1. Log in to the Linux ECS.
   2. Run the following command to open the resolv.conf file:

      vi /etc/resolv.conf

   3. Check whether the nameserver value in the file is the same as the IP address of the DNS server provided in What Are Huawei Cloud Private DNS Server Addresses?
      • If yes, go to 3.
      • If no, go to 2.

2. (Optional) Configure the DNS server for the ECS.
   1. Log in to the Linux ECS.
   2. Run the following command to edit the resolv.conf configuration file:

      vi /etc/resolv.conf

   3. Add the following statement to configure the DNS server:

      nameserver IP address of the DNS server

      Example:

      Consider the CN North region as an example. Add the following statement:

      nameserver 100.125.1.250

3. Configure the NTP server for the ECS.
   1. Log in to the Linux ECS.
   2. Run the following commands to stop the chronyd process:

      systemctl stop chronyd

      systemctl disable chronyd

   3. Run the following command to edit the ntp.conf configuration file:

      vim /etc/ntp.conf

   4. Add the following statement to configure the NTP server:

      server Domain name of the NTP server

      Example:

      server ntp.myhuaweicloud.com

   5. Run the following command to start the NTP service upon system restart:

      For Euler and CentOS:

      systemctl restart ntpd

      For SUSE:

      service ntpd restart

      

      Run the required command based on the OS running on the ECS.

      If the message "Failed to restart ntpd.service: Unit not found." is displayed, run the yum -y install ntp command.

   6. Run the following command to check whether the time on the NTP server has been synchronized with that on the upper-layer NTP server:

      ntpq -p

      If "*" is displayed, the time has been synchronized.

      

      It takes several minutes to perform NTP time synchronization for the first time.

   7. Set the automatic startup of the NTP service.

      For Euler and CentOS:

      chkconfig ntpd on

      For SUSE:

      chkconfig ntpd on

Windows

Take an ECS running Windows Server 2012 as an example.

1. Log in to the Windows ECS as user Administrator.
2. Enable the local area connection.
   1. In the lower right corner of the taskbar, right-click the network connection icon.
   2. Click Open Network and Sharing Center.
      Figure 2 Open Network and Sharing Center
      
   3. In the navigation pane on the left, click Change adapter settings.

3. Configure the DNS server for the ECS.
   1. Double-click network connections.
   2. Click Properties in the lower left corner.
      Figure 3 Local area connection
      
   3. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
      Figure 4 Selecting a protocol type
      
   4. Select Use the following DNS server addresses and set the IP addresses of the DNS servers.
      Figure 5 Setting the IP addresses of the DNS servers
      

4. Configure the NTP server for the ECS.
   1. Start the Run dialog box. Enter regedit and click OK.
   2. Modify the registry entries.
      • In HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services > W32Time > TimeProviders > NtpClient, set the value of Enabled to 1, indicating that the NTP client is used.
      • In HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services > W32Time > TimeProviders > NtpServer, set the value of Enabled to 0, indicating that the NTP server is stopped.
      • Choose the HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services > W32Time > Parameters file and set the NtpServer data. For example, set its data to ntp.myhuaweicloud.com. Set the data of TYPE to NTP.
      • In HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ W32Time \ TimeProviders \ NtpClient, set the value of SpecialPollInterval to 60 and that of Base to Decimal, indicating the clock synchronization cycle is 60s.
      • In HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ W32Time \ config, set the values of MaxPosPhaseCorrection and MaxNegPhaseCorrection to ffffffff and that of Base to Hexadecimal.
   3. Open the Run dialog box, enter services.msc, and click OK. The Services window is displayed.
   4. View the service named Windows Time and set the Start Type to Automatic to synchronize time from the NTP server.
   5. Open the Run dialog box and run the following commands in sequence to restart the Windows Time service:

      net stop w32time

      net start w32time

   6. Manually change the time on the client to make it different from that on the NTP server. One minute later, check whether the time on the client is the same as that on the NTP server. If yes, the time is synchronized.

Follow-up Procedure

After the ECS is restarted, the DNS configuration is reset, and its IP address is changed to the IP address of the DNS server in the VPC subnet. Therefore, before restarting the ECS, check whether the DNS configuration in the VPC subnet is the same as the target DNS configuration. If they are different, modify the DNS configuration in the VPC subnet. For details, see Modifying a Subnet.