ALM-19014 Capacity Quota Usage on ZooKeeper Exceeds the Threshold Severely

Description

The system checks the ZNode usage of HBase every 120 seconds. This alarm is generated when the ZNode capacity usage of HBase exceeds the "Critical" alarm threshold (90% by default).

This alarm is cleared when the capacity usage of ZNode is less than the "Critical" alarm threshold.

If the multi-instance function is enabled in the cluster and multiple HBase services are installed, determine the HBase service for which the alarm is generated based on the value of ServiceName in Location of the alarm. For example, if ServiceName is HBase-1 in Location, the operation object in the handling procedure should be changed from HBase to HBase-1.

Attribute

Parameters

Impact on the System

This alarm indicates that the capacity usage of the ZNode of HBase has exceeded the threshold severely. As a result, the write request of the HBase service fails.

Possible Causes

• DR is configured for HBase, and data synchronization fails or is slow in DR.
• A large number of WAL files are being split in the HBase cluster.

Procedure

Check the capacity configuration and usage of ZNode.

1. On FusionInsight Manager, choose O&M > Alarm > Alarms. Select the alarm whose Alarm ID is "19014", and view the threshold in Additional Information.
2. Log in to the HBase client as user root. Run the following command to access the client installation directory:

   cd client installation directory

   Run the following command to set environment variables:

   source bigdata_env

   If the cluster uses the security version, run the following command to perform security authentication:

   kinit hbase

   Enter the password as prompted (obtain the password from the administrator).

3. Run the hbase zkcli command to log in to the ZooKeeper client and run the listquota /hbase command to view the ZNode capacity quota of the HBase service. The ZNode root directory in the command is specified by the zookeeper.znode.parent parameter of the HBase service. The marked area in the following figure shows the capacity configuration of the root ZNode of the HBase service.

   

4. Run the getusage /hbase/splitWAL command to check the capacity usage of the ZNode. Check whether the ratio of "Data size" in the command output to the ZNode capacity quota is close to the alarm threshold.
   • If yes, go to 5.
   • If no, go to 6.

5. On FusionInsight Manager, choose O&M > Alarm > Alarms. Check whether the alarm whose Alarm ID is "12007", "19000", or "19013" and ServiceName in Location is the current HBase service exists.
   • If yes, click View Help on the right of the alarm and rectify the fault by referring to the help document. Then, go to 8.
   • If no, go to 9

6. Run the getusage /hbase/replication command to check the capacity usage of the ZNode. Check whether the ratio of "Data size" in the command output to the ZNode capacity quota is close to the alarm threshold.
   • If yes, go to 7.
   • If no, go to 9.

7. On FusionInsight Manager, choose O&M > Alarm > Alarms. Check whether the alarm whose Alarm ID is "19006" and ServiceName in Location is the current HBase service exists.
   • If yes, click View Help on the right of the alarm and rectify the fault by referring to the help document. Then, go to 8
   • If no, go to 9.

8. Wait for five minutes and check whether the alarm is cleared.
   • If yes, no further action is required.
   • If no, go to 9.

Collect fault information.

9. On the FusionInsight Manager page, choose O&M > Log > Download.
10. In Service, select HBase of the cluster to be operated.
11. Click in the upper right corner to set Start Date and End Date to 10 minutes before and after the time when the alarm is generated, and click Download.
12. Contact the O&M personnel and provide the collected logs.

Alarm Clearing

After the fault is rectified, the system automatically clears this alarm.

Related Information

None