ALM-19015 Quantity Quota Usage on ZooKeeper Exceeds the Threshold

Description

The system checks the ZNode usage of the HBase service every 120 seconds. This alarm is generated when the system detects that the quantity of ZNodes used of the HBase service exceeds the alarm threshold (75% by default).

This alarm is cleared when the quantity usage of ZNodes is less than the threshold.

If the multi-instance function is enabled in the cluster and multiple HBase services are installed, determine the HBase service for which the alarm is generated based on the value of ServiceName in Location of the alarm. For example, if Service name is HBase-1 in Location, change the operation object in the handling procedure from HBase to HBase-1.

Attribute

Parameters

Impact on the System

This alarm indicates that the quantity of ZNodes used in the HBase service has exceeded the threshold. If this alarm is not handled in a timely manner, the problem severity may be escalated to "Critical", affecting data writing.

Possible Causes

• DR is configured for HBase, and data synchronization fails or is slow in DR.
• A large number of WAL files are being split in the HBase cluster.

Procedure

Check the quantity quota and usage of ZNodes.

1. On FusionInsight Manager, choose O&M > Alarm > Alarms. Select the alarm whose ID is "19015", and view the threshold in Additional Information.
2. Log in to the HBase client as user root. Run the following command to access the client installation directory:

   cd client installation directory

   Run the following command to set environment variables:

   source bigdata_env

   If the cluster uses the security version, run the following command to perform security authentication:

   kinit hbase

   Enter the password as prompted (obtain the password from the administrator).

3. Run the hbase zkcli command to log in to the ZooKeeper client and run the listquota /hbase command to view the ZNode quantity quota of the HBase service. The ZNode root directory in the command is specified by the zookeeper.znode.parent parameter of the HBase service. The marked area in the following figure shows the quantity quota of the root ZNode of the HBase service.

   

4. Run the getusage /hbase/splitWAL command to check the quantity usage of the ZNode. Check whether the ratio of "Node count" in the command output to the ZNode quantity quota is close to the alarm threshold.
   • If yes, go to 5.
   • If no, go to 6.

5. On FusionInsight Manager, choose O&M > Alarm > Alarms. Check whether the alarm whose ID is "12007", "19000", or "19013" and ServiceName in Location is the current HBase service exists.
   • If yes, click View Help on the right of the alarm and rectify the fault by referring to the help document. Then, go to 8.
   • If no, go to 9.

6. Run the getusage /hbase/replication command to check the usage of the ZNodes. Check whether the ratio of "Node count" in the command output to the ZNode quantity quota is close to the alarm threshold.
   • If yes, go to 7.
   • If no, go to 9.

7. On FusionInsight Manager, choose O&M > Alarm > Alarms. Check whether the alarm whose Alarm ID is "19006" and ServiceName in Location is the current HBase service exists.
   • If yes, click View Help on the right of the alarm and rectify the fault by referring to the help document. Then, go to 7.
   • If no, go to 9.

8. Check whether the alarm is cleared.
   • If yes, no further action is required.
   • If no, go to 9.

Collect fault information.

9. On FusionInsight Manager, choose O&M > Log > Download.
10. In the Service area, select HBase of the cluster to be operated.
11. Click in the upper right corner, and set Start Date and End Date for log collection to 10 minutes ahead of and after the alarm generation time, respectively. Then, click Download.
12. Contact the O&M personnel and provide the collected logs.

Alarm Clearing

After the fault is rectified, the system automatically clears this alarm.

Related Information

None