Help Center/ Object Storage Service/ SDK Reference/ Go/ Objects (SDK for Go)/ Object Upload Overview (SDK for Go)/ Uploading an Object - Resumable (SDK for Go)
Updated on 2024-12-09 GMT+08:00
View PDF
Share

Uploading an Object - Resumable (SDK for Go)

Function

The resumable upload is an encapsulated and enhanced version of the multipart upload used for dealing with possible upload failures of large files when the network connection is unstable or a program crashes. This API splits the file into multiple parts and uploads them individually. The upload result of each part is recorded in a checkpoint file in real time. A success message is returned only when all parts are uploaded. If any parts fail, an error message is returned telling you to call the API again to upload the failed parts. Since the checkpoint file contains the progress of each part, it saves you uploading all parts again in the event of an error.

You can call ObsClient.UploadFile to perform a resumable upload.

Restrictions

  • To upload an object, you must be the bucket owner or have the required permission (obs:object:PutObject in IAM or PutObject in a bucket policy). For details, see Introduction to OBS Access Control, IAM Custom Policies, and Configuring an Object Policy.
  • The mapping between OBS regions and endpoints must comply with what is listed in Regions and Endpoints.
  • The file uploaded by the resumable upload API must be larger than 100 KB in size.
  • When the resumable upload API is used, this option should be enabled so that the progress of the last upload can be read for entering the process again.

Method

func (obsClient ObsClient) UploadFile(input *UploadFileInput) (output *CompleteMultipartUploadOutput, err error)

Request Parameters

Table 1 List of request parameters

Parameter

Type

Mandatory (Yes/No)

Description

input

*UploadFileInput

Yes

Explanation:

Input parameters for a resumable upload. For details, see Table 2.

Table 2 UploadFileInput

Parameter

Type

Mandatory (Yes/No)

Description

Bucket

string

Yes

Explanation:

Bucket name

Restrictions:

  • A bucket name must be unique across all accounts and regions.
  • A bucket name:
    • Must be 3 to 63 characters long and start with a digit or letter. Lowercase letters, digits, hyphens (-), and periods (.) are allowed.
    • Cannot be formatted as an IP address.
    • Cannot start or end with a hyphen (-) or period (.).
    • Cannot contain two consecutive periods (..), for example, my..bucket.
    • Cannot contain a period (.) and a hyphen (-) adjacent to each other, for example, my-.bucket or my.-bucket.
  • If you repeatedly create buckets of the same name in the same region, no error will be reported and the bucket attributes comply with those set in the first creation request.

Default value:

None

Key

string

Yes

Explanation:

Object name. An object is uniquely identified by an object name in a bucket. An object name is a complete path that does not contain the bucket name.

For example, if the address for accessing the object is examplebucket.obs.ap-southeast-1.myhuaweicloud.com/folder/test.txt, the object name is folder/test.txt.

Value range:

The value must contain 1 to 1,024 characters.

Default value:

None

UploadFile

string

Yes

Explanation:

Local file path of the object to be uploaded

Default value:

None

PartSize

int64

Yes

Explanation:

Part size

Value range:

The value ranges from 100 KB to 5 GB, in bytes.

Default value:

102400

TaskNum

int

No

Explanation:

Maximum number of parts that can be uploaded concurrently

Value range:

An integer from 1 to 10000

Default value:

1, indicating concurrent uploads are not used

EnableCheckpoint

bool

No

Explanation:

Whether to enable the resumable upload

Value range:

true: The resumable upload mode is enabled.

false: The resumable upload mode is disabled.

Default value:

false

CheckpointFile

string

No

Explanation:

File used to record the upload progress. This parameter is valid only in the resumable upload mode.

Default value:

If this parameter is left blank, the progress file will be in the same directory as the local file to be uploaded.

ACL

AclType

No

Explanation:

Pre-defined access policy that can be specified during object creation. For details about the ACL, see ACLs.

Value range:

See Table 3.

Default value:

None

WebsiteRedirectLocation

string

No

Explanation:

If the bucket is configured with website hosting, the request for obtaining the object can be redirected to another object in the bucket or an external URL.

The request is redirected to object anotherPage.html in the same bucket:

WebsiteRedirectLocation:/anotherPage.html

The request is redirected to an external URL http://www.example.com/:

WebsiteRedirectLocation:http://www.example.com/

OBS obtains the specified value from the header and stores it in the object metadata WebsiteRedirectLocation.

Restrictions:

  • The value must start with a slash (/), http://, or https:// and cannot exceed 2 KB.
  • OBS only supports redirection for objects in the root directory of a bucket.

Default value:

None

ContentType

string

No

Explanation:

MIME type of the file to be uploaded. MIME type is a standard way of describing a data type and is used by the browser to decide how to display data.

Value range:

See What Is Content-Type (MIME)?

Default value:

If you do not specify this parameter when uploading an object, the SDK determines the object type based on the suffix of the specified object name and automatically assigns a value to this parameter.

SseHeader

SseCHeader or SseKmsHeader

No

Explanation:

Server-side encryption header information. If SSE-C is used, see Table 4. If SSE-KMS is used, see Table 5.

StorageClass

StorageClassType

No

Explanation:

Object storage class

Value range:

See Table 6.

Default value:

If this parameter is not specified, the object inherits the storage class of the bucket.

Metadata

map[string]string

No

Explanation:

Custom metadata of the object to be uploaded. You can add a header starting with x-obs-meta- in the request to define metadata. The custom metadata will be returned in the response when you retrieve the object or query the object metadata.

Restrictions:

  • The custom metadata cannot exceed 8 KB. To measure the custom metadata, sum the number of bytes in the UTF-8 encoding of each key and value.
  • The custom metadata keys are case insensitive, but are stored in lowercase in OBS. The key values are case sensitive.
  • Both custom metadata keys and their values must conform to US-ASCII standards. If non-ASCII or unrecognizable characters are necessary, they must be encoded and decoded in URL or Base64 on the client, because the server side does not perform any decoding.

Default value:

None

Expires

int64

No

Explanation:

Expiration time of the object (calculated from the latest modification time of the object). Expired objects are automatically deleted.

Value range:

1 to (263 - 1), in days

Default value:

None

GrantReadId

string

No

Explanation:

ID (domain_id) of an account the READ permission is granted to. The account with the READ permission can read the current object and obtain its metadata.

Value range:

To obtain the account ID, see How Do I Get My Account ID and User ID?

Default value:

None

GrantReadAcpId

string

No

Explanation:

ID (domain_id) of an account the READ_ACP permission is granted to. The account with the READ_ACP permission can read the ACL of the current object.

Value range:

To obtain the account ID, see How Do I Get My Account ID and User ID?

Default value:

None

GrantWriteAcpId

string

No

Explanation:

ID (domain_id) of an account the WRITE_ACP permission is granted to. The account with the WRITE_ACP permission can write the ACL of the current object.

Value range:

To obtain the account ID, see How Do I Get My Account ID and User ID?

Default value:

None

GrantFullControlId

string

No

Explanation:

ID (domain_id) of an account the FULL_CONTROL permission is granted to. The account with the FULL_CONTROL permission can read the current object, obtain its metadata, and obtain and write its ACL.

Value range:

To obtain the account ID, see How Do I Get My Account ID and User ID?

Default value:

None

EncodingType

string

No

Explanation:

Encoding type for Key in the response. If Key in the response contains control characters that are not supported by the XML 1.0 standard, you can specify this parameter to encode Key.

Value range:

url

Default value:

None. If you leave this parameter blank, encoding is not applied to Key.
Table 3 AclType

Constant

Default Value

Description

AclPrivate

private

Private read/write

A bucket or object can only be accessed by its owner.

AclPublicRead

public-read

Public read and private write

If this permission is granted on a bucket, anyone can read the object list, multipart tasks, metadata, and object versions in the bucket.

If it is granted on an object, anyone can read the content and metadata of the object.

AclPublicReadWrite

public-read-write

Public read/write

If this permission is granted on a bucket, anyone can read the object list, multipart tasks, metadata, and object versions in the bucket, and can upload or delete objects, initiate multipart upload tasks, upload parts, assemble parts, copy parts, and abort multipart upload tasks.

If it is granted on an object, anyone can read the content and metadata of the object.

AclPublicReadDelivered

public-read-delivered

Public read on a bucket as well as objects in the bucket

If this permission is granted on a bucket, anyone can read the object list, multipart tasks, metadata, and object versions, and read the content and metadata of objects in the bucket.

NOTE:

AclPublicReadDelivered does not apply to objects.

AclPublicReadWriteDelivered

public-read-write-delivered

Public read/write on a bucket as well as objects in the bucket

If this permission is granted on a bucket, anyone can read the object list, multipart uploads, metadata, and object versions in the bucket, and can upload or delete objects, initiate multipart upload tasks, upload parts, assemble parts, copy parts, and abort multipart uploads. They can also read the content and metadata of objects in the bucket.

NOTE:

AclPublicReadWriteDelivered does not apply to objects.

AclBucketOwnerFullControl

bucket-owner-full-control

If this permission is granted on an object, only the bucket and object owners have the full control over the object.

By default, if you upload an object to a bucket of any other user, the bucket owner does not have the permissions on your object. After you grant this policy to the bucket owner, the bucket owner can have full control over your object.
Table 4 SseCHeader

Parameter

Type

Mandatory (Yes/No)

Description

Encryption

string

Yes if used as a request parameter

Explanation:

SSE-C used for encrypting objects

Value range:

AES256, indicating objects are encrypted using SSE-C

Default value:

None

Key

string

Yes if used as a request parameter

Explanation:

Key for encrypting the object when SSE-C is used

Restrictions:

The value is a Base64-encoded 256-bit key, for example, K7QkYpBkM5+hca27fsNkUnNVaobncnLht/rCB2o/9Cw=.

Default value:

None

KeyMD5

string

No if used as a request parameter

Explanation:

MD5 value of the key for encrypting objects when SSE-C is used. This value is used to check whether any error occurs during the transmission of the key.

Restrictions:

The value is encrypted by MD5 and then encoded by Base64, for example, 4XvB3tbNTN+tIEVa0/fGaQ==.

Default value:

None
Table 5 SseKmsHeader

Parameter

Type

Mandatory (Yes/No)

Description

Encryption

string

Yes if used as a request parameter

Explanation:

SSE-KMS used for encrypting objects

Value range:

kms, indicating objects are encrypted using SSE-KMS

Default value:

None

Key

string

No if used as a request parameter

Explanation:

ID of the KMS master key when SSE-KMS is used

Value range:

Valid value formats are as follows:

  1. regionID:domainID:key/key_id
  2. key_id

In the preceding formats:

Default value:

  • If this parameter is not specified, the default master key will be used.
  • If there is no such a default master key, OBS will create one and use it by default.
Table 6 StorageClassType

Constant

Default Value

Description

StorageClassStandard

STANDARD

OBS Standard

Features low access latency and high throughput and is used for storing massive, frequently accessed (multiple times a month) or small objects (< 1 MB) requiring quick response.

StorageClassWarm

WARM

OBS Infrequent Access

Used for storing data that is semi-frequently accessed (fewer than 12 times a year) but is instantly available when needed.

StorageClassCold

COLD

OBS Archive

Used for storing rarely accessed (once a year) data.

Responses

Table 7 List of returned results

Parameter

Type

Description

output

*CompleteMultipartUploadOutput

Explanation:

Returned results. For details, see Table 8.

err

error

Explanation:

Error messages returned by the API
Table 8 CompleteMultipartUploadOutput

Parameter

Type

Description

StatusCode

int

Explanation:

HTTP status code

Value range:

A status code is a group of digits that can be 2xx (indicating successes) or 4xx or 5xx (indicating errors). It indicates the status of a response. For more information, see Status Code.

Default value:

None

RequestId

string

Explanation:

Request ID returned by the OBS server

Default value:

None

ResponseHeaders

map[string][]string

Explanation:

HTTP response headers

Default value:

None

ETag

string

Explanation:

Base64-encoded, 128-bit MD5 value of the object. ETag is the unique identifier of the object content. It can be used to determine whether the object content is changed. For example, if ETag value is A when an object is uploaded but changes to B when the object is downloaded, it indicates that the object content is changed. The ETag reflects changes to the object content, rather than the object metadata. An uploaded object or copied object has a unique ETag.

Restrictions:

If an object is encrypted using server-side encryption, the ETag is not the MD5 value of the object.

Value range:

The value must contain 32 characters.

Default value:

None

Bucket

string

Explanation:

Bucket in which parts are assembled

Restrictions:

  • A bucket name must be unique across all accounts and regions.
  • A bucket name:
    • Must be 3 to 63 characters long and start with a digit or letter. Lowercase letters, digits, hyphens (-), and periods (.) are allowed.
    • Cannot be formatted as an IP address.
    • Cannot start or end with a hyphen (-) or period (.).
    • Cannot contain two consecutive periods (..), for example, my..bucket.
    • Cannot contain a period (.) and a hyphen (-) adjacent to each other, for example, my-.bucket or my.-bucket.
  • If you repeatedly create buckets of the same name in the same region, no error will be reported and the bucket attributes comply with those set in the first creation request.

Default value:

None

Key

string

Explanation:

Object name obtained after part combination An object is uniquely identified by an object name in a bucket. An object name is a complete path that does not contain the bucket name.

Value range:

The value must contain 1 to 1,024 characters.

Default value:

None

Location

string

Explanation:

URL of the generated object after part assembling

Example: https://example-Bucket.obs.regions.myhuaweicloud.com/example-Object

Default value:

None

VersionId

string

Explanation:

Version ID of the object obtained after part combination If versioning is enabled for the bucket, the object version ID will be returned.

Value range:

The value must contain 32 characters.

Default value:

None

SseHeader

SseCHeader or SseKmsHeader

Explanation:

Server-side encryption header information. If SSE-C is used, see Table 9. If SSE-KMS is used, see Table 10.

EncodingType

string

Explanation:

Encoding type for some elements in the response. If Key contains control characters (special characters) that are not supported by the XML 1.0 standard, set this parameter to url.

Value range:

url

Default value:

None. If you leave this parameter blank, encoding is not applied to elements.
Table 9 SseCHeader

Parameter

Type

Mandatory (Yes/No)

Description

Encryption

string

Yes if used as a request parameter

Explanation:

SSE-C used for encrypting objects

Value range:

AES256, indicating objects are encrypted using SSE-C

Default value:

None

Key

string

Yes if used as a request parameter

Explanation:

Key for encrypting the object when SSE-C is used

Restrictions:

The value is a Base64-encoded 256-bit key, for example, K7QkYpBkM5+hca27fsNkUnNVaobncnLht/rCB2o/9Cw=.

Default value:

None

KeyMD5

string

No if used as a request parameter

Explanation:

MD5 value of the key for encrypting objects when SSE-C is used. This value is used to check whether any error occurs during the transmission of the key.

Restrictions:

The value is encrypted by MD5 and then encoded by Base64, for example, 4XvB3tbNTN+tIEVa0/fGaQ==.

Default value:

None
Table 10 SseKmsHeader

Parameter

Type

Mandatory (Yes/No)

Description

Encryption

string

Yes if used as a request parameter

Explanation:

SSE-KMS used for encrypting objects

Value range:

kms, indicating objects are encrypted using SSE-KMS

Default value:

None

Key

string

No if used as a request parameter

Explanation:

ID of the KMS master key when SSE-KMS is used

Value range:

Valid value formats are as follows:

  1. regionID:domainID:key/key_id
  2. key_id

In the preceding formats:

Default value:

  • If this parameter is not specified, the default master key will be used.
  • If there is no such a default master key, OBS will create one and use it by default.

Code Examples

This example uploads example/objectname to examplebucket in a resumable upload.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
 
package main
import (
    "fmt"
    "os"
    obs "github.com/huaweicloud/huaweicloud-sdk-go-obs/obs"
)
func main() {
    //Obtain an AK/SK pair using environment variables or import an AK/SK pair in other ways. Using hard coding may result in leakage.
    //Obtain an AK/SK pair on the management console. For details, see https://support.huaweicloud.com/intl/en-us/usermanual-ca/ca_01_0003.html.
    ak := os.Getenv("AccessKeyID")
    sk := os.Getenv("SecretAccessKey")
    // (Optional) If you use a temporary AK/SK pair and a security token to access OBS, you are advised not to use hard coding to reduce leakage risks. You can obtain an AK/SK pair using environment variables or import an AK/SK pair in other ways.
    // securityToken := os.Getenv("SecurityToken")
    // Enter the endpoint corresponding to the bucket. CN-Hong Kong is used here as an example. Replace it with the one currently in use.
    endPoint := "https://obs.ap-southeast-1.myhuaweicloud.com"
    // Create an obsClient instance.
    // If you use a temporary AK/SK pair and a security token to access OBS, use the obs.WithSecurityToken method to specify a security token when creating an instance.
    obsClient, err := obs.New(ak, sk, endPoint/*, obs.WithSecurityToken(securityToken)*/)
    if err != nil {
        fmt.Printf("Create obsClient error, errMsg: %s", err.Error())
    }
    input := &obs.UploadFileInput{}
    // Specify a bucket name.
    input.Bucket = "examplebucket"
    // Specify the object (example/objectname as an example) to upload.
    input.Key = "example/objectname"
    // Specify your local file (/tmp/objectname as an example) to upload.
    input.UploadFile = "/tmp/objectname"
    // Specify whether to enable resumable upload (true as an example). The default value is false, indicating that resumable upload is disabled.
    input.EnableCheckpoint = true
    // Specify a part size, in bytes. This example sets each part to 9 MB.
    input.PartSize = 9 * 1024 * 1024
    // Specify the maximum number of parts that can be concurrently uploaded. 5 is used as an example.
    input.TaskNum = 5
    // Upload the object using resumable upload.
    output, err := obsClient.UploadFile(input)
    if err == nil {
        fmt.Printf("Upload file(%s) under the bucket(%s) successful!\n", input.UploadFile, input.Bucket)
        fmt.Printf("ETag:%s\n", output.ETag)
        return
    }
    fmt.Printf("Upload file(%s) under the bucket(%s) fail!\n", input.UploadFile, input.Bucket)
    if obsError, ok := err.(obs.ObsError); ok {
        fmt.Println("An ObsError was found, which means your request sent to OBS was rejected with an error response.")
        fmt.Println(obsError.Error())
    } else {
        fmt.Println("An Exception was found, which means the client encountered an internal problem when attempting to communicate with OBS, for example, the client was unable to access the network.")
        fmt.Println(err)
    }
}

Helpful Links