Help Center/ Huawei Qiankun CloudService/ More Documents/ Device Alarm Handling/ WAC&AP Alarms/ ALM-303046916 A Card Experienced A Complete Failure
Updated on 2024-01-25 GMT+08:00

ALM-303046916 A Card Experienced A Complete Failure

Description

ENTITYTRAP/4/BOARDINVALID: OID [OID] Board is invalid for some reason.(Index=[INTEGER], EntityPhysicalIndex=[INTEGER], PhysicalName="[OCTET]", EntityTrapEntType= [INTEGER], EntityTrapFaultID=132624, EntityTrapReasonDescr="[OCTET]")

A card experienced a complete failure.

Attribute

Alarm ID

Alarm Severity

Alarm Type

303046916

Warning

equipmentAlarm

Parameters

Name

Meaning

OID

Indicates the MIB object ID of the alarm

Index

Indicates the entity index.

EntityPhysicalIndex

Indicates the physical entity index.

EntPhysicalName

Indicates the name of the physical entity.

EntityTrapEntType

Indicates the type of the physical entity, such as mpu(1), and lpu(2).

EntityTrapFaultID

Indicates the error code.

EntityTrapReasonDescr

Indicates the description of the alarm cause.

Impact on the System

Services will be interrupted.

Possible Causes

Error Code

Possible Cause

132629

The PHY chip is abnormal.

132624

The ECC detects a memory error.

132614

The logic of the CPLD on the card is abnormal.

132616

The CPLD clock is faulty.

132148

The optical module is abnormal.

132622

The clock driver IIC is faulty.

Procedure (AC device)

  1. Check whether the faulty card is registered successfully and services are running properly.

    Run the display device command to check whether the faulty card is registered successfully, and run the display interface command to view the statistics on received and sent packets. According to the statistics, check whether services are running properly.

    • If the faulty card is registered successfully and services are running properly, no further action is required.
    • If the faulty card is unregistered or services are not running properly, go to step 2.

  2. If the faulty card is a main control board, run the reboot command to reboot the device. Then check whether the device is working properly.

    • If the card can be registered successfully and services are running properly, no further action is required.
    • If the card cannot be registered or services cannot run properly, the card hardware is faulty. Replace this card.
    • If the fault persists, go to step 3.

  3. Contact technical support engineers.

Procedure (Cloud AP device)

  1. Check whether the faulty card is registered successfully and services are running properly.

    Run the display interface command to view the statistics on received and sent packets. According to the statistics, check whether services are running properly.

    • If the faulty card is registered successfully and services are running properly, no further action is required.
    • If the faulty card is unregistered or services are not running properly, go to step 2.

  2. If the faulty card is a main control board, run the reboot command to reboot the device. Then check whether the device is working properly.

    • If the card can be registered successfully and services are running properly, no further action is required.
    • If the card cannot be registered or services cannot run properly, the card hardware is faulty. Replace this card.
    • If the fault persists, go to step 3.

  3. Contact technical support engineers.

Related Information

None