Redirecting HTTP to HTTPS for a LoadBalancer Ingress

1. Log in to the CCE console and click the cluster name to access the cluster console.
2. Choose Services & Ingresses in the navigation pane, click the Ingresses tab, and click Create Ingress in the upper right corner.
3. Configure ingress parameters.
   

   This example explains only key parameters for redirecting HTTP to HTTPS. You can configure other parameters as required. For details, see Creating a LoadBalancer Ingress on the Console.

   Table 1 Key parameters

   Parameter	Description	Example
   Name	Enter an ingress name.	ingress-test
   Load Balancer	Select a load balancer to be associated with the ingress or automatically create a load balancer. In this example, only dedicated load balancers are supported.	Dedicated
   Listener	External Protocol: HTTP and HTTPS are available. External Port: specifies the port of the load balancer listener. Redirect to HTTPS: After this function is enabled, you can configure the HTTPS port. External Port: Enter an HTTPS port. Certificate Source: TLS secret and ELB server certificates are supported. Server Certificate: Use a certificate created on ELB. If no certificate is available, go to the ELB console and create one. For details, see Adding a Certificate.	External Protocol: HTTP External Port: 80 Redirect to HTTPS: enabled External Port: 443 Certificate Source: ELB server certificate Server Certificate: cert-test
   Forwarding Policy	Domain Name: Enter an actual domain name to be accessed. If it is left blank, the ingress can be accessed through the IP address. Ensure that the domain name has been registered and licensed. Once a forwarding policy is configured with a domain name specified, you must use the domain name for access. Path Matching Rule: Select Prefix match, Exact match, or RegEx match. Path: Enter the path provided by a backend application for external access. The path added must be valid in the backend application, or the forwarding cannot take effect. Destination Service: Select an existing Service or create a Service. Any Services that do not match the search criteria will be filtered out automatically. Destination Service Port: Select the access port of the destination Service.	Domain Name: You do not need to configure this parameter. Path Matching Rule: RegEx match Path: / Destination Service: nginx Destination Service Port: 80

   Figure 1 Redirecting HTTP to HTTPS
   
   Figure 2 Configuring a port for redirecting HTTP to HTTPS
   

4. Click OK.

You can use annotations to redirect the requests of an ingress to an HTTPS listener. The following is an example:

1. Use kubectl to access the cluster. For details, see Connecting to a Cluster Using kubectl.
2. Create a YAML file named ingress-test.yaml. The file name can be customized.

   vi ingress-test.yaml

   An example YAML file of an ingress associated with an existing load balancer is as follows:

   apiVersion: networking.k8s.io/v1
   kind: Ingress
   metadata:
     name: test-redirect-listener
     namespace: default
     annotations:
       kubernetes.io/elb.id: df76342f-e898-402a-bac8-bde5bf974da8
       kubernetes.io/elb.class: performance
       kubernetes.io/elb.listen-ports: '[{"HTTP":80},{"HTTPS":443}]'             # Multi-port configuration
       kubernetes.io/elb.ssl-redirect: 'true'        # Enable redirection from HTTP to HTTPS.
       kubernetes.io/elb.tls-certificate-ids: 6cfb43c9de1a41a18478b868e34b0a82       # HTTPS listener server certificate
   spec:
     rules:
       - host: ''
         http:
           paths:
             - path: /
               backend:
                 service:
                   name: test-service
                   port:
                     number: 80
               property:
                 ingress.beta.kubernetes.io/url-match-mode: STARTS_WITH
               pathType: ImplementationSpecific
     ingressClassName: cce

   Table 2 Key parameters

   Parameter	Mandatory	Type	Description
   kubernetes.io/elb.listen-ports	Yes	String	Multi-port listening configuration. After configuration, this setting cannot be modified in clusters of a version earlier than v1.23.18-r10, v1.25.16-r0, v1.27.16-r0, v1.28.13-r0, v1.29.8-r0, or v1.30.4-r0. In clusters of v1.23.18-r10, v1.25.16-r0, v1.27.16-r0, v1.28.13-r0, v1.29.8-r0, v1.30.4-r0, or later, this setting can be modified. Format: The value is a JSON string, for example: [{"HTTP":80},{"HTTPS":443}] Parameter: The port number ranges from 1 to 65535. NOTE: You can configure this annotation along with the one for enabling HTTP/2, but HTTP/2 takes effect only on HTTPS ports.
   kubernetes.io/elb.ssl-redirect	Yes	String	Whether to enable redirection from HTTP to HTTPS. Format: The value can be true or false. Parameter: true indicates that redirection is enabled. If the value is false or the parameter is unavailable, redirection is disabled. NOTE: Either this annotation or the annotation of a grayscale release can be configured.

3. Create an ingress.

   kubectl create -f ingress-test.yaml

   If information similar to the following is displayed, the ingress has been created:

   ingress/test-redirect-listener created

4. Check the created ingress.

   kubectl get ingress

   If information similar to the following is displayed, the ingress has been created:

   NAME                    CLASS    HOSTS     ADDRESS          PORTS   AGE
   test-redirect-listener  cce      *         121.**.**.**     80      10s