Updated on 2023-04-26 GMT+08:00

From DDM to Kafka

Supported Source and Destination Databases

Table 1 Supported databases

Source DB

Destination DB

  • DDM instances
  • Kafka

Prerequisites

  • You have logged in to the DRS console.
  • Your account balance is greater than or equal to $0 USD.
  • For details about the DB types and versions supported by real-time synchronization, see Supported Databases.
  • If a subaccount is used to create a DRS task, ensure that an agency has been added. To create an agency, see Agency Management.

Suggestions

  • The success of database synchronization depends on environment and manual operations. To ensure a smooth synchronization, perform a synchronization trial before you start the synchronization to help you detect and resolve problems in advance.
  • It is recommended that you start a task during off-peak hours to minimize the impact of synchronization on your services.
  • For more information about the impact of DRS on databases, see What Is the Impact of DRS on Source and Destination Databases?

Precautions

Before creating a synchronization task, read the following notes:

  • You are advised to create an independent database account for DRS task connection to prevent task failures caused by database account password modification.
  • After changing the account passwords for the source or destination databases, modify the connection information in the DRS task as soon as possible to prevent automatic retry after a task failure. Automatic retry will lock the database accounts.
Table 2 Precautions

Type

Restrictions

Database permissions

  • The source database DDM account must have at least one permission, for example, SELECT. The physical sharded database account must have the following permissions: SELECT, SHOW VIEW, EVENT, LOCK TABLES, REPLICATION SLAVE and REPLICATION CLIENT.

Synchronization object

  • The table data can be synchronized.

Source database

  • During the incremental synchronization, the binlog of the source physical sharded database must be enabled and in row format. Enable GTID and set the value of binlog_row_image to FULL.
  • If the storage space is sufficient, store the binlogs for as long as possible. The recommended retention period is three days.
  • The source database server_id must be set. The value of server_id ranges from 1 to 4294967296.
  • The database names and table names of the source sharding middleware cannot contain the following characters: '<>/\ and non-ASCII characters.
  • Enable skip-name-resolve for the source sharded database to reduce the possibility of connection timeout.
  • Enable GTID on the source sharded database.
  • The source sharded database does not support real-time synchronization of the enumerated and set types.
  • The source database table name and field name cannot exceed 30 characters.

Destination database

  • The destination database is a Kafka database.

Precautions

  • If the data types are incompatible, the synchronization may fail.
  • If the source database contains a duplicate primary key, data synchronized to the destination database will be less than that in the source database. Therefore, you must check and correct the data before starting the synchronization task.
  • After a task is created, you cannot add schemas to the source database or modify the old schema to associate with the new RDS DB instance. Otherwise, data cannot be synchronized or the task fails.
  • During synchronization, do not modify or delete the usernames, passwords, permissions, or ports of the source and destination databases.
  • During the synchronization, do not change the sharding key of a table on the source DDM instance, or change an unsharded or broadcast table to a sharded table, or change a sharded table to an unsharded or broadcast table.
  • DDL operations are supported during incremental synchronization.

Procedure

  1. On the Data Synchronization Management page, click Create Synchronization Task.
  2. On the Create Synchronization Instance page, select a region and project, specify the task name, description, and the synchronization instance details, and click Create Now.

    • Task information description
      Figure 1 Synchronization task information
      Table 3 Task and recipient description

      Parameter

      Description

      Region

      The region where the synchronization instance is deployed. You can change the region.

      Project

      The project corresponds to the current region and can be changed.

      Task Name

      The task name must start with a letter and consist of 4 to 50 characters. It can contain only letters, digits, hyphens (-), and underscores (_).

      Description

      The description consists of a maximum of 256 characters and cannot contain special characters !=<>'&"\

    • Synchronization instance details
      Figure 2 Synchronization instance details
      Table 4 Synchronization instance settings

      Parameter

      Description

      Data Flow

      Select Out of the cloud.

      Source DB Engine

      Select DDM.

      Destination DB Engine

      Select Kafka.

      Network Type

      The Public network is used as an example. Available options: VPC, Public network and VPN or Direct Connect

      Source DB Instance

      An available DDM instance.

      Synchronization Instance Subnet

      Select the subnet where the synchronization instance is located. You can also click View Subnet to go to the network console to view the subnet where the instance resides.

      By default, the DRS instance and the destination DB instance are in the same subnet. You need to select the subnet where the DRS instance resides and ensure that there are available IP addresses. To ensure that the synchronization instance is successfully created, only subnets with DHCP enabled are displayed.

      Synchronization Mode

      • Incremental

        Through log parsing, incremental data generated on the source database is synchronized to the destination database.

        During synchronization, the source database continues to provide services for external systems with zero downtime.

      Source DB Instance Quantity

      Specifies the number of DB instances bound to the source DDM database. Set this parameter based on the site requirements.

    • DRS instance specifications
      Figure 3 Specifications
      Table 5 Specifications

      Parameter

      Description

      Specifications

      DRS instance specifications. Different specifications have different performance upper limits. For details, see Real-Time Synchronization.

      NOTE:

      Currently, DRS supports specification upgrade only in MySQL-to-MySQL synchronization tasks with single-node DRS instances configured. Task specifications cannot be downgraded. For details, see Changing Specifications.

    • Enterprise Projects and Tags
      Figure 4 Enterprise projects and tags
      Table 6 Enterprise Projects and Tags

      Parameter

      Description

      Enterprise Project

      An enterprise project you would like to use to centrally manage your Global Accelerator resources. Select an enterprise project from the drop-down list. The default project is default. For more information about enterprise project, see Enterprise Management User Guide.

      To customize an enterprise project, click Enterprise in the upper right corner of the console. The Enterprise Management page is displayed. For details, see Creating an Enterprise Project in Enterprise Management User Guide.

      Tags

      • This setting is optional. Adding tags helps you better identify and manage your tasks. Each task can have up to 10 tags.
      • After a task is created, you can view its tag details on the Tags tab. For details, see Tag Management.

    If a task fails to be created, DRS retains the task for three days by default. After three days, the task automatically ends.

  3. On the Configure Source and Destination Databases page, wait until the synchronization instance is created. Then, specify source and destination database information and click Test Connection for both the source and destination databases to check whether they have been connected to the synchronization instance. After the connection tests are successful, click Next.

    Figure 5 Source database information
    Table 7 Source database settings

    Parameter

    Description

    DB Instance Name

    The DDM instance you selected when you create a synchronization task. The instance name cannot be changed.

    Database Username

    The username for accessing the source database.

    Database Password

    The password for the database username.

    The IP address, port, username, and password of the source database are encrypted and stored in the database and the synchronization instance, and will be cleared after the task is deleted.

    Figure 6 Destination database information
    Table 8 Destination database settings

    Parameter

    Description

    IP Address or Domain Name

    The IP address or domain name of the destination database.

    Security Protocol

    Available options: PLAINTEXT, SSL, SASL_PLAINTEXT, and SASL_SSL. For details, see Kafka Authentication.

    The username and password of the destination database are encrypted and stored in the database and the synchronization instance during the synchronization. After the task is deleted, the username and password are permanently deleted.

  4. On the Set Synchronization Task page, select the synchronization policy, objects, and data format, and click Next.

    Figure 7 Synchronization mode
    Table 9 Synchronization Object

    Parameter

    Description

    Topic Synchronization Policy

    Topic synchronization policy. You can select A specific topic or Auto-generated topics.

    Topic

    Select the topic to be synchronized to the destination database. This parameter is available when the topic is set to A specified topic.

    Topic Name Format

    Topic name format. This parameter is available when Topic Synchronization Policy is set to Auto-generated topics.

    Due to Kafka restrictions, a topic name can contain only ASCII characters, periods (.), underscores (_), and hyphens (-). If a topic name exceeds the limit, the topic fails to be created and the task is abnormal.

    If a topic name contains a database object name, ensure that the characters in the object name meet the Kafka topic naming requirements.

    Only variables database and tablename are supported. The other characters must be constants. Replace $database$ with the database name and $tablename$ with the table name.

    For example, if this parameter is set to $database$-$tablename$ and the database name is db1, and the table name is tab1, the topic name is db1-tab1. If DDL statements are synchronized, $tablename$ is empty and the topic name is db1.

    Number of Partitions

    This parameter is available when Topic Synchronization Policy is set to Auto-generated topics.

    The number of partitions of a topic. Each topic can have multiple partitions. More partitions can provide higher throughput but consume more resources. Set the number of partitions based on the actual situation of brokers.

    Replication Factor

    This parameter is available when Topic Synchronization Policy is set to Auto-generated topics.

    Number of copies of a topic. Each topic can have multiple copies, and the copies are placed on different brokers in a cluster. The number of copies cannot exceed the number of brokers. Otherwise, the topic fails to be created.

    Synchronize Topic To

    The policy for synchronizing topics to the Kafka partitions.

    • If topics are synchronized to different partitions by hash value of the database and table names, the performance on a single table query can be improved.
    • If topics are synchronized to partition 0, strong consistency can be obtained but write performance is impacted.
    • If topics are synchronized to different partitions by hash value of the primary key, one table corresponds to one topic.

    Data Format in Kafka

    Select the data format to be delivered to Kafka.

    • Avro refers to binary encoded format.
    • JSON: JSON message format, which is easy to interpret but takes up more space.
    • JSON-C: A data format that is compatible with multiple batch and stream computing frameworks.

    For details, see Kafka Message Format.

    Synchronization Object

    The left pane displays the source database objects, and the right pane displays the selected objects. DRS supports table- and database-level synchronization. You can select data for synchronization based on your service requirements.

    NOTE:
    • To quickly select the desired database objects, you can use the search function.
    • If there are changes made to the source databases or objects, click in the upper right corner to update the objects to be synchronized.
    • If the object name contains spaces, the spaces before and after the object name are not displayed. If there are multiple spaces between the object name and the object name, only one space is displayed.
    • The name of the selected synchronization object cannot contain spaces.

  5. On the Check Task page, check the synchronization task.

    • If any check fails, review the cause and rectify the fault. After the fault is rectified, click Check Again.

      For details about how to handle check failures, see Checking Whether the Source Database Is Connected in Data Replication Service User Guide.

    • If all check items are successful, click Next.
      Figure 8 Pre-check

      You can proceed to the next step only when all checks are successful. If there are any items that require confirmation, view and confirm the details first before proceeding to the next step.

  6. On the displayed page, specify Start Time, Send Notification, SMN Topic, Synchronization Delay Threshold, and Stop Abnormal Tasks After, confirm that the configured information is correct, select the check box before the agreement, and click Submit to submit the task.

    Figure 9 Task startup settings
    Table 10 Task startup settings

    Parameter

    Description

    Started Time

    Set Start Time to Start upon task creation or Start at a specified time based on site requirements.

    NOTE:

    After a synchronization task is started, the performance of the source and destination databases may be affected. You are advised to start a synchronization task during off-peak hours.

    Send Notifications

    SMN topic. This parameter is optional. If an exception occurs during synchronization, the system will send a notification to the specified recipients.

    SMN Topic

    This parameter is available only after you enable Send Notifications and create a topic on the SMN console and add a subscriber.

    For details, see Simple Message Notification User Guide.

    Synchronization Delay Threshold

    During an incremental synchronization, a synchronization delay indicates a time difference (in seconds) of synchronization between the source and destination database.

    If the synchronization delay exceeds the threshold you specify, DRS will send alarms to the specified recipients. The value ranges from 0 to 3,600. To avoid repeated alarms caused by the fluctuation of delay, an alarm is sent only after the delay has exceeded the threshold for six minutes.

    NOTE:
    • If the delay threshold is set to 0, no notifications will be sent to the recipient.
    • In the early stages of an incremental synchronization, the synchronization delay is long because a large quantity of data is awaiting synchronization. In this case, no notifications will be sent.
    • Before setting the delay threshold, enable Send Notification.

    Stop Abnormal Tasks After

    Number of days after which an abnormal task is automatically stopped. The value must range from 14 to 100. The default value is 14.

    NOTE:

    Tasks in the abnormal state are still charged. If tasks remain in the abnormal state for a long time, they cannot be resumed. Abnormal tasks run longer than the period you set (unit: day) will automatically stop to avoid unnecessary fees.

  7. After the task is submitted, you can view and manage it on the Data Synchronization Management page.

    • You can view the task status. For more information about task status, see Task Statuses.
    • You can click in the upper-right corner to view the latest task status.
    • By default, DRS retains a task in the Configuration state for three days. After three days, DRS automatically deletes background resources, and the task status remains unchanged. When you restart the task configuration, DRS applies for resources again.