Installing, Configuring, and Starting GDS

Scenario

GaussDB(DWS) uses GDS to allocate the source data for parallel data import. Deploy GDS on the data server.

If a large volume of data is stored on multiple data servers, install, configure, and start GDS on each server. Then, data on all the servers can be imported in parallel. The procedure for installing, configuring, and starting GDS is the same on each data server. This section describes how to perform this procedure on one data server.

Context

1. GDS can be installed in the following OSs:

   Kunpeng platform:

   • Community Enterprise Operating System 7.6
   • EulerOS 2.0 SP8
   • Red Hat Enterprise Linux Server release 7.5
   • NeoKylin 7.5/7.6
   x86:

   • SUSE Linux Enterprise Server 10 SP4 x86_64
   • SUSE Linux Enterprise Server 11 SP1/SP2/SP3/SP4 x86_64
   • SUSE Linux Enterprise Server 12 SP0/SP1/SP2/SP3/SP5 x86_64
   • Red Hat Enterprise Linux Server release 6.4/6.5/6.6/6.7/6.8/6.9/7.0/7.1/7.2/7.3/7.4/7.5 x86_64
   • Community Enterprise Operating System 6.4/6.5/6.6/6.7/6.8/6.9/7.0/7.1/7.2/7.3/7.4 x86_64
   • EulerOS 2.5 x86_64
2. The GDS version must match the cluster version. For example, GDS V100R008C00 matches DWS 1.3.X. Otherwise, the import or export may fail, or the import or export process may fail to respond.

   Therefore, use the latest version of GDS. After the database is upgraded, download the latest version of GaussDB(DWS) GDS as instructed in Procedure. When the import or export starts, GaussDB(DWS) checks the GDS versions. If the versions do not match, an error message is displayed and the import or export is terminated.

   To obtain the version number of GDS, run the following command in the GDS decompression directory:

   gds -V

   To view the database version, run the following SQL statement after connecting to the database:

   1	SELECT version();

Procedure

1. For details about how to import or export data using GDS, see .
2. Log in as user root to the data server where GDS is to be installed and run the following command to create the directory for storing the GDS package:

   mkdir -p /opt/bin/dws

3. Upload the GDS package to the created directory.

   Use the SUSE Linux package as an example. Upload the GDS package dws_client_8.1.x_suse_x64.zip to the directory created in the previous step.

4. (Optional) If SSL is used, upload the SSL certificates to the directory created in 2.
5. Go to the directory and decompress the package.

   cd /opt/bin/dws
   unzip dws_client_8.1.x_suse_x64.zip

6. Create a GDS user and the user group to which the user belongs. This user is used to start GDS and read source data.

   groupadd gdsgrp
   useradd -g gdsgrp gds_user

7. Change the owner of the GDS package directory and source data file directory to the GDS user.

   chown -R gds_user:gdsgrp /opt/bin/dws/gds
   chown -R gds_user:gdsgrp /input_data 

8. Switch to user gds_user.

   su - gds_user

   If the current cluster version is 8.0.x or earlier, skip 9 and go to 10.

   If the current cluster version is 8.1.x, go to the next step.

9. Execute the script on which the environment depends (applicable only to 8.1.x).

   cd /opt/bin/dws/gds/bin
   source gds_env

10. Start GDS.

    GDS is green software and can be started after being decompressed. There are two ways to start GDS. One is to run the gds command to configure startup parameters. The other is to write the startup parameters into the gds.conf configuration file and run the gds_ctl.py command to start GDS.

    The first method is recommended when you do not need to import data again. The second method is recommended when you need to import data regularly.

    • Method 1: Run the gds command to start GDS.
      • If data is transmitted in non-SSL mode, run the following command to start GDS:

        gds -d dir -p ip:port -H address_string -l log_file -D -t worker_num

        Example:

        /opt/bin/dws/gds/bin/gds -d /input_data/ -p 192.168.0.90:5000 -H 10.10.0.1/24 -l /opt/bin/dws/gds/gds_log.txt -D -t 2

      • If data is transmitted in SSL mode, run the following command to start GDS:

        gds -d dir -p ip:port -H address_string -l log_file -D 
        -t worker_num --enable-ssl --ssl-dir Cert_file

        Example:

        Run the following command to upload the SSL certificate mentioned in 4 to /opt/bin:

        /opt/bin/dws/gds/bin/gds -d /input_data/ -p 192.168.0.90:5000 -H 10.10.0.1/24 -l /opt/bin/dws/gds/gds_log.txt -D --enable-ssl --ssl-dir /opt/bin/

      Replace the information in italic as required.

      • -d dir: directory for storing data files that contain data to be imported. This tutorial uses /input_data/ as an example.
      • -p ip:port: listening IP address and port for GDS. The default value is 127.0.0.1. Replace it with the IP address of a 10GE network that can communicate with GaussDB(DWS). The port number ranges from 1024 to 65535. The default port is 8098. This tutorial uses 192.168.0.90:5000 as an example.
      • -H address_string: specifies the hosts that are allowed to connect to and use GDS. The value must be in CIDR format. Configure this parameter to enable a GaussDB(DWS) cluster to access GDS for data import. Ensure that the network segment covers all hosts in a GaussDB(DWS) cluster.
      • -l log_file: GDS log directory and log file name. This tutorial uses /opt/bin/dws/gds/gds_log.txt as an example.
      • -D: GDS in daemon mode. This parameter is used only in Linux.
      • -t worker_num: number of concurrent GDS threads. If the data server and GaussDB(DWS) have available I/O resources, you can increase the number of concurrent GDS threads.

        GDS determines the number of threads based on the number of concurrent import transactions. Even if multi-thread import is configured before GDS startup, the import of a single transaction will not be accelerated. By default, an INSERT statement is an import transaction.

      • --enable-ssl: enables SSL for data transmission.
      • --ssl-dir Cert_file: SSL certificate directory. Set this parameter to the certificate directory in 4.
      • For details about GDS parameters, see .
    • Method 2: Write the startup parameters into the gds.conf configuration file and run the gds_ctl.py command to start GDS.
      1. Run the following command to go to the config directory of the GDS package and modify the gds.conf configuration file. For details about the parameters in the gds.conf configuration file, see Table 1.

         vim /opt/bin/dws/gds/config/gds.conf

         Example:

         The gds.conf configuration file contains the following information:

         <?xml version="1.0"?>
         <config>
         <gds name="gds1" ip="192.168.0.90" port="5000" data_dir="/input_data/" err_dir="/err" data_seg="100MB" err_seg="100MB" log_file="/log/gds_log.txt" host="10.10.0.1/24" daemon='true' recursive="true" parallel="32"></gds>
         </config>

         Information in the configuration file is described as follows:

         • The data server IP address is 192.168.0.90 and the GDS listening port is 5000.
         • Data files are stored in the /input_data/ directory.
         • Error log files are stored in the /err directory. The directory must be created by a user who has the GDS read and write permissions.
         • The size of a single data file is 100 MB.
         • The size of a single error log file is 100 MB.
         • Logs are stored in the /log/gds_log.txt file. The directory must be created by a user who has the GDS read and write permissions.
         • Only nodes with the IP address 10.10.0.* can be connected.
         • The GDS process is running in daemon mode.
         • Recursive data file directories are used.
         • The number of concurrent import threads is 2.
      2. Start GDS and check whether it has been started.

         python3 gds_ctl.py start

         Example:

         cd /opt/bin/dws/gds/bin
         python3 gds_ctl.py start
         Start GDS gds1                  [OK]
         gds [options]:
          -d dir            Set data directory.
          -p port           Set GDS listening port.
             ip:port        Set GDS listening ip address and port.
          -l log_file       Set log file.
          -H secure_ip_range
                            Set secure IP checklist in CIDR notation. Required for GDS to start.
          -e dir            Set error log directory.
          -E size           Set size of per error log segment.(0 < size < 1TB)
          -S size           Set size of data segment.(1MB < size < 100TB)
          -t worker_num     Set number of worker thread in multi-thread mode, the upper limit is 32. If without setting, the default value is 1.
          -s status_file    Enable GDS status report.
          -D                Run the GDS as a daemon process.
          -r                Read the working directory recursively.
          -h                Display usage.

gds.conf Parameter Description