Help Center/ GaussDB(DWS)/ Standard Data Warehouse (9.1.0.x)/ GaussDB(DWS) Performance Tuning/ SQL Tuning/ Advanced SQL Tuning/ Optimizing Statement Pushdown
Updated on 2024-12-18 GMT+08:00
View PDF

Optimizing Statement Pushdown

Statement Pushdown

Currently, the GaussDB(DWS) optimizer can use three methods to develop statement execution policies in the distributed framework: generating a statement pushdown plan, a distributed execution plan, or a distributed execution plan for sending statements.

  • A statement pushdown plan pushes query statements from a CN down to DNs for execution and returns the execution results to the CN.
  • In a distributed execution plan, a CN compiles and optimizes query statements, generates a plan tree, and then sends the plan tree to DNs for execution. After the statements have been executed, execution results will be returned to the CN.
  • A distributed execution plan for sending statements pushes queries that can be pushed down (mostly base table scanning statements) to DNs for execution. Then, the plan obtains the intermediate results and sends them to the CN, on which the remaining queries are to be executed.

When sending statements through a distributed execution plan, DNs send numerous intermediate results to CNs. However, certain statements cannot be pushed down and must be executed on CNs, leading to performance bottlenecks in bandwidth, storage, and computing. Therefore, you are not advised to use the query statements that only the third policy is applicable to.

Statements cannot be pushed down to DNs if they have Functions That Do Not Support Pushdown or Syntax That Does Not Support Pushdown. Generally, you can rewrite the execution statements to solve the problem.

Viewing Whether the Execution Plan Has Been Pushed Down to DNs

Perform the following procedure to quickly determine whether the execution plan can be pushed down to DNs:

  1. Set the GUC parameter enable_fast_query_shipping to off to use the distributed framework policy for the query optimizer. 

    1
    		 
    SET enable_fast_query_shipping = off;

  2. View the execution plan.

    If the execution plan contains Data Node Scan, the SQL statements cannot be pushed down to DNs. If the execution plan contains Streaming, the SQL statements can be pushed down to DNs.

    For example:

    1
2
3
4
5
    		 
    select
count(ss.ss_sold_date_sk order by ss.ss_sold_date_sk)c1 
from store_sales ss, store_returns sr 
where 
sr.sr_customer_sk = ss.ss_customer_sk;

    The execution plan is as follows, which indicates that the SQL statement cannot be pushed down.

     1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
    		 
                                  QUERY PLAN
--------------------------------------------------------------------------
Aggregate
->  Hash Join
Hash Cond: (ss.ss_customer_sk = sr.sr_customer_sk)
->  Data Node Scan on store_sales "_REMOTE_TABLE_QUERY_"
Node/s: All datanodes
->  Hash
->  Data Node Scan on store_returns "_REMOTE_TABLE_QUERY_"
Node/s: All datanodes
(8 rows)

Syntax That Does Not Support Pushdown

SQL syntax that does not support pushdown is described using the following table definition examples:

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
 
postgresCREATE TABLE CUSTOMER1
(
    C_CUSTKEY     BIGINT NOT NULL
  , C_NAME        VARCHAR(25) NOT NULL
  , C_ADDRESS     VARCHAR(40) NOT NULL
  , C_NATIONKEY   INT NOT NULL
  , C_PHONE       CHAR(15) NOT NULL
  , C_ACCTBAL     DECIMAL(15,2)   NOT NULL
  , C_MKTSEGMENT  CHAR(10) NOT NULL
  , C_COMMENT     VARCHAR(117) NOT NULL
)
DISTRIBUTE BY hash(C_CUSTKEY);
CREATE TABLE test_stream(a int, b float);--float does not support redistribution.
postgresCREATE TABLE sal_emp ( c1 integer[] ) DISTRIBUTE BY replication;
  • The returning statement cannot be pushed down. 
    1
2
3
4
5
6
7
8
9
    		 
    postgresexplain update customer1 set C_NAME = 'a' returning c_name;
                               QUERY PLAN                                           
------------------------------------------------------------------
 Update on customer1  (cost=0.00..0.00 rows=30 width=187)
   Node/s: All datanodes
   Node expr: c_custkey
   ->  Data Node Scan on customer1 "_REMOTE_TABLE_QUERY_"  (cost=0.00..0.00 rows=30 width=187)
         Node/s: All datanodes
(5 rows)
  • If columns in count(distinct expr) do not support redistribution, they do not support pushdown. 
    1
2
3
4
5
6
7
8
9
    		 
    postgresexplain verbose select count(distinct b) from test_stream;
                                          QUERY PLAN                                           
------------------------------------------------------------------ Aggregate  (cost=2.50..2.51 rows=1 width=8)
   Output: count(DISTINCT test_stream.b)
   ->  Data Node Scan on test_stream "_REMOTE_TABLE_QUERY_"  (cost=0.00..0.00 rows=30 width=8)
         Output: test_stream.b
         Node/s: All datanodes
         Remote query: SELECT b FROM ONLY public.test_stream WHERE true
(6 rows)
  • Statements using distinct on cannot be pushed down. 
     1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
    		 
    postgresexplain verbose select distinct on (c_custkey) c_custkey from customer1 order by c_custkey;
                                            QUERY PLAN                                             
------------------------------------------------------------------ Unique  (cost=49.83..54.83 rows=30 width=8)
   Output: customer1.c_custkey
   ->  Sort  (cost=49.83..52.33 rows=30 width=8)
         Output: customer1.c_custkey
         Sort Key: customer1.c_custkey
         ->  Data Node Scan on customer1 "_REMOTE_TABLE_QUERY_"  (cost=0.00..0.00 rows=30 width=8)
               Output: customer1.c_custkey
               Node/s: All datanodes
               Remote query: SELECT c_custkey FROM ONLY public.customer1 WHERE true
(9 rows)
  • In a statement using FULL JOIN, if the column specified using JOIN does not support redistribution, the statement does not support pushdown. 
     1
 2
 3
 4
 5
 6
 7
 8
 9
10
    		 
    postgresexplain select * from test_stream t1 full join test_stream t2 on t1.a=t2.b;
                                              QUERY PLAN                                              
------------------------------------------------------------------ Hash Full Join  (cost=0.38..0.82 rows=30 width=24)
   Hash Cond: ((t1.a)::double precision = t2.b)
   ->  Data Node Scan on test_stream "_REMOTE_TABLE_QUERY_"  (cost=0.00..0.00 rows=30 width=12)
         Node/s: All datanodes
   ->  Hash  (cost=0.00..0.00 rows=30 width=12)
         ->  Data Node Scan on test_stream "_REMOTE_TABLE_QUERY_"  (cost=0.00..0.00 rows=30 width=12)
               Node/s: All datanodes
(7 rows)
  • A statement containing array expressions cannot be pushed down. 
     1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
    		 
    postgresexplain verbose select array[c_custkey,1] from customer1 order by c_custkey;

                          QUERY PLAN                                                    
------------------------------------------------------------------ Sort  (cost=49.83..52.33 rows=30 width=8)
   Output: (ARRAY[customer1.c_custkey, 1::bigint]), customer1.c_custkey
   Sort Key: customer1.c_custkey
   ->  Data Node Scan on "__REMOTE_SORT_QUERY__"  (cost=0.00..0.00 rows=30 width=8)
         Output: (ARRAY[customer1.c_custkey, 1::bigint]), customer1.c_custkey
         Node/s: All datanodes
         Remote query: SELECT ARRAY[c_custkey, 1::bigint], c_custkey FROM ONLY public.customer1 WHERE true ORDER BY 2
(7 rows)
  • Subplans that are shared among multiple threads and cannot be pushed down. 
     1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
    		 
    postgres=# explain verbose  select c_custkey in (select c_custkey from customer1) b from customer1;
                          QUERY PLAN                                                    
------------------------------------------------------------------ 
Data Node Scan on customer1 "_REMOTE_TABLE_QUERY_"  (cost=2.50..5.00 rows=1000 width=8)
   Output: (hashed SubPlan 1)
   Node/s: All datanodes
   Remote query: SELECT c_custkey FROM ONLY public.customer1 WHERE true
   SubPlan 1
     ->  Data Node Scan on customer "_REMOTE_TABLE_QUERY_"  (cost=0.00..0.00 rows=1000 width=8)
           Output: public.customer.c_custkey
           Node/s: All datanodes
           Remote query: SELECT c_custkey FROM ONLY public.customer1 WHERE true
(9 rows)
  • The following table describes the scenarios where a statement containing WITH RECURSIVE cannot be pushed down in the current version, as well as the causes.

    No.

    Scenario

    Cause of Not Supporting Pushdown

    1

    The query contains foreign tables or HDFS tables.

    LOG: SQL can't be shipped, reason: RecursiveUnion contains HDFS Table or ForeignScan is not shippable (In this table, LOG describes the cause of not supporting pushdown.)

    In the current version, queries containing foreign tables or HDFS tables do not support pushdown.

    2

    Multiple Node Groups

    LOG: SQL can't be shipped, reason: With-Recursive under multi-nodegroup scenario is not shippable

    In the current version, pushdown is supported only when all base tables are stored and computed in the same Node Group.

    3

    		 
    WITH recursive t_result AS (
SELECT dm,sj_dm,name,1 as level
FROM test_rec_part
WHERE sj_dm > 10
UNION
SELECT t2.dm,t2.sj_dm,t2.name||' > '||t1.name,t1.level+1
FROM t_result t1
JOIN test_rec_part t2 ON t2.sj_dm = t1.dm
)
SELECT * FROM t_result t;

    LOG: SQL can't be shipped, reason: With-Recursive does not contain "ALL" to bind recursive & none-recursive branches

    ALL is not used for UNION. In this case, the return result is deduplicated.

    4

    		 
    WITH RECURSIVE x(id) AS
(
select count(1) from pg_class where oid=1247
UNION ALL
SELECT id+1 FROM x WHERE id < 5
), y(id) AS
(
select count(1) from pg_class where oid=1247
UNION ALL
SELECT id+1 FROM x WHERE id < 10
)
SELECT y.*, x.* FROM y LEFT JOIN x USING (id) ORDER BY 1;

    LOG: SQL can't be shipped, reason: With-Recursive contains system table is not shippable

    A base table contains the system catalog.

    5

    		 
    WITH RECURSIVE t(n) AS (
VALUES (1)
UNION ALL
SELECT n+1 FROM t WHERE n < 100
)
SELECT sum(n) FROM t;

    LOG: SQL can't be shipped, reason: With-Recursive contains only values rte is not shippable

    Only VALUES is used for scanning base tables. In this case, the statement can be executed on the CN, and DNs are unnecessary.

    6

    		 
    select  a.ID,a.Name,
(
with recursive cte as (
select ID, PID, NAME from b where b.ID = 1
union all
select parent.ID,parent.PID,parent.NAME
from cte as child join b as parent on child.pid=parent.id
where child.ID = a.ID
)
select NAME from cte limit 1
) cName
from
(
select id, name, count(*) as cnt
from a group by id,name
) a order by 1,2;

    LOG: SQL can't be shipped, reason: With-Recursive recursive term correlated only is not shippable

    The correlation conditions of correlated subqueries are only in the recursion part, and the non-recursion part has no correlation condition.

    7

    		 
    WITH recursive t_result AS (
select * from(
SELECT dm,sj_dm,name,1 as level
FROM test_rec_part
WHERE sj_dm < 10 order by dm limit 6 offset 2)
UNION all
SELECT t2.dm,t2.sj_dm,t2.name||' > '||t1.name,t1.level+1
FROM t_result t1
JOIN test_rec_part t2 ON t2.sj_dm = t1.dm
)
SELECT * FROM t_result t;

    LOG: SQL can't be shipped, reason: With-Recursive contains conflict distribution in none-recursive(Replicate) recursive(Hash)

    The replicate plan is used for limit in the non-recursion part but the hash plan is used in the recursion part, resulting in conflicts.

    8

    		 
    with recursive cte as
(
select * from rec_tb4 where id<4
union all
select h.id,h.parentID,h.name from
(
with recursive cte as
(
select * from rec_tb4 where id<4
union all
select h.id,h.parentID,h.name from rec_tb4 h inner join cte c on h.id=c.parentID
)
SELECT id ,parentID,name from cte order by parentID
) h
inner join cte  c on h.id=c.parentID
)
SELECT id ,parentID,name from cte order by parentID,1,2,3;

    LOG: SQL can't be shipped, reason: Recursive CTE references recursive CTE "cte"

    recursive of multiple-layers are nested. That is, a recursive is nested in the recursion part of another recursive.

Functions That Do Not Support Pushdown

This module describes the variability of functions. The function variability in GaussDB(DWS) is as follows:

  • IMMUTABLE

    Indicates that the function always returns the same result if the parameter values are the same.

  • STABLE

    Indicates that the function cannot modify the database, and that within a single table scan it will consistently return the same result for the same parameter values, but that its result varies by SQL statements.

  • VOLATILE

    Indicates that the function value can change even within a single table scan, so no optimizations can be made.

The volatility of a function can be obtained by querying its provolatile column in pg_proc. The value i indicates immutable, s indicates stable, and v indicates volatile. The valid values of the proshippable column in pg_proc are t, f, and NULL. This column and the provolatile column together describe whether a function is pushed down.

  • If the provolatile of a function is i, the function can be pushed down regardless of the value of proshippable.
  • If the provolatile of a function is s or v, the function can be pushed only if the value of proshippable is t.
  • CTEs containing random are not pushed down, because pushdown may lead to incorrect results.

For a UDF, you can specify the values of provolatile and proshippable during its creation. For details, see CREATE FUNCTION.

In scenarios where a function does not support pushdown, perform one of the following as required:

  • If it is a system function, replace it with a functionally equivalent one.
  • If it is a UDF function, check whether its provolatile and proshippable are correctly defined.

Example: UDF

Define a user-defined function that generates fixed output for a certain input as the immutable type.

Use the TPCDS sales information as an example. You need to define a function to obtain the discount information.

1
2
3
4
 
CREATE FUNCTION func_percent_2 (NUMERIC, NUMERIC) RETURNS NUMERIC
AS 'SELECT $1 / $2 WHERE $2 > 0.01'
LANGUAGE SQL
VOLATILE;

Run the following statement:

1
2
 
SELECT func_percent_2(ss_sales_price, ss_list_price)
FROM store_sales;

The execution plan is as follows:

func_percent_2 is not pushed down, and ss_sales_price and ss_list_price are executed on a CN. In this case, a large amount of resources on the CN is consumed, and the performance deteriorates as a result.

In this example, the function returns certain output when certain input is entered. Therefore, we can modify the function to the following one:

1
2
3
4
 
CREATE FUNCTION func_percent_1 (NUMERIC, NUMERIC) RETURNS NUMERIC
AS 'SELECT $1 / $2 WHERE $2 > 0.01'
LANGUAGE SQL
IMMUTABLE;

Run the following statement:

1
2
 
SELECT func_percent_1(ss_sales_price, ss_list_price)
FROM store_sales;

The execution plan is as follows:

func_percent_1 is pushed down to DNs for quicker execution. (In TPCDS 1000X, where three CNs and 18 DNs are used, the query efficiency is improved by over 100 times).

Example 2: Pushing Down the Sorting Operation

Learn more information in Case: Pushing Down Sort Operations to DNs.

Parent topic: Advanced SQL Tuning