Updated on 2023-11-21 GMT+08:00

Creating a DR Instance

GeminiD instances support HA. If an instance fails to be connected due to a natural disaster, you can switch services to its DR instance and change the DB connection address on the application side to quickly recover service access.

Precautions

  • A primary instance can have only one DR instance.
  • This function is in the open beta test (OBT) phase. To use this function, contact customer service.

Prerequisites

A primary instance has been created.

Creating a DR Instance

  1. Log in to the management console.
  2. In the service list, choose Databases > GeminiDB.
  3. On the Instances page, locate the primary instance you want to create a DR instance for and choose More > Create DR Instance in the Operation column.
  4. On the displayed page, configure required parameters and click Next.

    Table 1 Basic information

    Parameter

    Description

    Billing Mode

    Select Yearly/Monthly or Pay-per-use.

    • Yearly/Monthly
      • In this mode, specify Required Duration at the bottom of the page. The system deducts the fees incurred from your account based on the service price.
      • If you do not need such an instance any longer after it expires, change the billing mode to pay-per-use to optimize costs. For details, see Changing the Billing Mode from Yearly/Monthly to Pay-per-Use.
        NOTE:

        Yearly/Monthly instances cannot be deleted directly. If such an instance is no longer required, unsubscribe from it. For details, see Unsubscribing from a Yearly/Monthly Instance.

    • Pay-per-use

    Region

    The region is the same as that of the primary instance.

    DB Instance Name

    The instance name:

    Can include 4 to 64 bytes and must start with a letter. It is case-sensitive and allows only letters, digits, hyphens (-), and underscores (_).

    Compatible API

    Cassandra

    DB Instance Type

    Cluster

    DB Engine Version

    The compatible API version is the same as that of the primary instance.

    CPU Type

    The CPU type is the same as that of the primary instance.

    AZ

    Availability zone where the instance is created. An AZ is a part of a region with its own independent power supplies and networks. AZs are physically isolated but can communicate through an internal network.

    An instance can be deployed in one or three AZs.

    • If you want to deploy an instance in a single AZ, select one AZ.
    • If you want to deploy your instance across AZs for disaster recovery, select three AZs. Nodes of the instance are evenly distributed across the three AZs.
    Table 2 Specifications and storage

    Parameter

    Description

    Instance Specifications

    vCPUs and memory of the instance.

    Different performance specifications support different connections and maximum IOPS. Select CPUs and memory based on your service requirements. For details, see DB Instance Specifications and Performance.

    After an instance is created, you can change its vCPUs and memory by referring to Changing vCPUs and Memory of an Instance.

    Nodes

    Specify the number of nodes based on service requirements.

    After an instance is created, you can add nodes by referring to Adding Nodes.

    Storage Space

    Storage space depends on the instance specifications. The minimum storage space is 100 GB, and the storage space you set must be an integer. You can increase a minimum of 1 GB at a time.

    Enable autoscaling to ensure that the instance has sufficient storage and keeps available. To enable this function, just switch on button Configure Autoscaling and set the following parameters:

    • If available storage drops to or below: The storage threshold for triggering autoscaling. When the percentage of available storage drops to or below the threshold you set or 10 GB, the system automatically scales up your instance storage.
    • Increase by: The percentage that your instance storage will be scaled up at. If the increased storage is not a multiple of 10 GB, the system will round it up to the nearest multiple of 10 GB. At least 100 GB is added each time.
    • Autoscaling Limit: Maximum amount that the system can automatically scale up an instance's storage space to. The value must be no less than the total storage of the instance and cannot exceed its maximum storage.

    After an instance is created, you can scale up its storage space by referring to Scaling Up Storage Space.

    NOTE:
    • Once autoscaling is enabled, an agency will be created and fees will be automatically deducted from your account.
    • Autoscaling is available only when you have the required permission. To enable this function, contact customer service.
    • You can enable autoscaling after an instance is created. For details, see Configuring Autoscaling.
    Table 3 Network

    Parameter

    Description

    VPC

    The VPC of the DR instance remains unchanged by default.

    Subnet

    The subnet of the DR instance remains unchanged by default. If you select another subnet in the same VPC, ensure that the selected subnet can be connected to the subnet of the primary instance.

    Security Group

    The security group of the DR instance remains unchanged by default.

    Table 4 Database configuration

    Parameter

    Description

    Administrator

    Username of the administrator account. The default value is rwuser.

    Administrator Password

    The password must be the same as that of the primary instance to ensure that a switchover is performed in the event of a failure.

    Confirm Password

    Enter the administrator password again.

    Parameter Template

    A parameter template contains API configuration values that can be applied to one or more instances.

    After an instance is created, you can modify its parameters to better meet your service requirements. For details, see Modifying a Parameter Template.

    Table 5 Tags

    Parameter

    Description

    Tags

    The setting is optional. Adding tags helps you better identify and manage your instances. Each instance supports up to 20 tags. To use more tags, contact customer service to apply for a quota of 20 tags.

    A tag consists of a tag key and a tag value.

    • Tag key: Mandatory if the instance is going to be tagged

      Each tag key is unique for each instance. It can include up to 36 characters, including digits, letters, underscores (_), and hyphens (-).

    • Tag value: Optional if the instance is going to be tagged

      The value can contain up to 43 characters, including digits, letters, underscores (_), periods (.), and hyphens (-).

    After an instance is created, you can view its tags on the Tags tab and can also add, modify, and delete tags of your instance. For details, see Managing Tags.

    Table 6 Required duration

    Parameter

    Description

    Required duration

    The length of your subscription if you select Yearly/Monthly billing. Subscription lengths range from one month to three years.

    Auto-renew

    • This option is not selected by default.
    • If you select this option, the auto-renew cycle is determined by the selected required duration.

  5. On the displayed page, confirm the instance details.

    • For yearly/monthly instances
      • If you need to modify the settings, click Previous to modify parameters.
      • If you do not need to modify the settings, read and agree to the service agreement, click Pay Now, and complete the payment.
    • For pay-per-use instances
      • If you need to modify the settings, click Previous to modify parameters.
      • If no modification is required, read and agree to the service agreement and click Submit.

  6. On the Instances page, click in front of the primary instance to view and manage the DR instance.

    • During DR instance creation, the status of the primary instance is DR cluster being created, and the status of the DR instance is Creating. This process takes about 5 to 9 minutes.
    • After the creation is complete, the status changes to Available.

      You can click in the upper right corner of the page to refresh the instance status.

    • During creation, an automated backup policy is enabled by default. A full backup is automatically triggered after an instance is created.