ALM-15794223 hwEthHalfDuplex
Description
Eth half duplex. (InterfaceIndex=[hwPhysicalPortIfIndex],InterfaceName=[hwPhysicalPortName])
The interface is negotiated to work in half-duplex mode. As a result, a large number of packets are lost.
Attribute
AlarmID |
Alarm OID |
Alarm Severity |
Alarm Type |
---|---|---|---|
15794223 |
1.3.6.1.4.1.2011.5.25.157.2.207 |
Warning |
Processing error alarm |
Parameters
Name |
Meaning |
---|---|
hwPhysicalPortIfIndex |
Physical interface index. |
hwPhysicalPortName |
Physical interface name. |
Impact on the System
In half-duplex mode, if bidirectional traffic is transmitted, packet loss may occur due to conflicts.
Possible Causes
Port configurations are different between the two sides (one port is set to speed force, and the other port is set to negotiation). As a result, the ports negotiate to half-duplex, and packet loss occurs, triggering a half-duplex alarm.
Procedure
- Check whether the rates of the interconnected interfaces at both ends are the same. If not, change them to be the same.
- Check whether the cable connection is correct. If yes, rectify the fault. Check whether the alarm is cleared.
- If the alarm is cleared, go to Step 4.
- If the alarm persists, go to Step 3.
- Collect alarm, log, and configuration information, and contact Huawei technical support personnel.
- End.
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot