Help Center/ Huawei Qiankun CloudService/ More Documents/ Device Alarm Handling/ V300 AR Alarms/ ALM-4288421943 VM CPU Usage Exceeding the Threshold
Updated on 2024-01-25 GMT+08:00
View PDF
Share

ALM-4288421943 VM CPU Usage Exceeding the Threshold

Description

EVM/2/EVM_CPU_USAGE_RISING:OID [OID] VM CPU utilization exceeded the pre-alarm threshold.(VMName=\"[octet]\", ThresholdWarning=[INTEGER], Thresholdcurrent=[INTEGER])

The VM CPU usage exceeded the threshold.

Attribute

Alarm ID

OID

Alarm Severity

Alarm Type

4288421943

1.3.6.1.4.1.2011.5.25.348.2.7.1

Major

Equipment alarm

Parameters

Name

Meaning

OID

Indicates the MIB object ID of the alarm.

VMName

Indicates a VM name.

ThresholdWarning

Indicates the alarm threshold.

Thresholdcurrent

Indicates the CPU usage.

Impact on the System

Services are affected.

Possible Causes

The configured VM specifications do not meet current service requirements.

Procedure

  1. Based on the VM type, log in to the VM and check whether the total memory and CPU usage of all supported services are normal.

    • If so, go to step 2.
    • If not, rectify the fault. If the fault persists, go to step 3.

  2. Configure a VM with more CPUs or with a higher memory or reduce services. Check whether the alarm is cleared.

    • If the alarm is cleared, go to step 4.
    • If the alarm persists, go to step 3.

  3. Collect alarm information, log information, and configuration, and contact technical support personnel.
  4. End.

Clearing

After the fault is rectified, the system clears this alarm, removing the need to manually clear it. This alarm will not be displayed on the Current Alarms page.

Parent topic: V300 AR Alarms