Updated on 2024-01-25 GMT+08:00

ALM-135462976 hwBoardRemove

Description

The board was removed. (EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityType=[EntityType], EntityTrapFaultID=[EntityTrapFaultID], Reason=[Reason])

A card is removed from the device.

Attribute

Alarm ID

OID

Alarm Severity

Alarm Type

135462976

1.3.6.1.4.1.2011.5.25.219.2.2.1

Warning

Equipment alarm

Parameters

Parameter

Description

EntPhysicalIndex

Entity index.

EntPhysicalName

Entity name.

EntityType

Entity type.

EntityTrapFaultID

Alarm cause.

Reason

  

Impact on the System

All services on the board are interrupted, and the reliability of control data transmission between devices is affected.

Possible Causes

A board was removed.

Procedure

  1. Check whether the board is removed manually.
    • If so, go to step 2.
    • If not, go to step 3.
  2. Re-insert the board. After the board is started successfully, run the display device command to check whether the board is registered successfully.
    • If the registration is successful, the fault is rectified.
    • If the registration fails, go to step 3.
  3. Collect alarm, log, and configuration information, and contact technical support personnel.