Help Center/ Huawei Qiankun CloudService/ More Documents/ Device Alarm Handling/ V600 Device Alarms/ Common Alarms/ ALM-135462943 hwPowerRemove
Updated on 2024-01-25 GMT+08:00
View PDF
Share

ALM-135462943 hwPowerRemove

Description

The power module was removed. (EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=[EntityTrapFaultID], EntityOperStatus=[EntityOperStatus], Reason=[ReasonDsp])

A power module was removed.

Attribute

Alarm ID

OID

Alarm Severity

Alarm Type

135462943

1.3.6.1.4.1.2011.5.25.219.2.5.1

Critical

Equipment alarm

Parameters

Name Meaning

EntPhysicalIndex

Indicates the index of an entity.

EntPhysicalName

Indicates the name of an entity.

EntityTrapFaultID

Indicates the error code.

EntityOperStatus

Indicates the Status.

ReasonDsp

ndicates a possible cause.

Impact on the System

The power module is removed, which may cause insufficient power supply. If the power supply is insufficient, the board may be powered off. This affects services. This fault needs to be rectified.

Possible Causes

A power module was removed.

Procedure

  1. Check whether the power module is installed.
  2. If so, check whether the power module is installed correctly.
  3. If the power module is installed correctly but the fault persists, replace the power module.
  4. If the fault persists after the power module is replaced, collect traps, logs, and configurations, and contact technical support personnel.

Clearing

After the fault is rectified, the system clears this alarm, removing the need to manually clear it. This alarm will not be displayed on the Current Alarms page.

Parent topic: Common Alarms