查询攻击日志
功能介绍
查询攻击日志
调用方法
请参见如何调用API。
URI
GET /v1/{project_id}/cfw/logs/attack
参数 |
是否必选 |
参数类型 |
描述 |
---|---|---|---|
project_id |
是 |
String |
租户项目id |
参数 |
是否必选 |
参数类型 |
描述 |
---|---|---|---|
start_time |
是 |
Long |
开始时间,以毫秒为单位的时间戳,如1718936272648 |
end_time |
是 |
Long |
结束时间,以毫秒为单位的时间戳,如1718936272648 |
src_ip |
否 |
String |
源IP |
src_port |
否 |
Integer |
源端口号 最小值:0 最大值:65535 |
dst_ip |
否 |
String |
目的IP |
dst_port |
否 |
Integer |
目的端口号 最小值:0 最大值:65535 |
protocol |
否 |
String |
协议类型,包含TCP, UDP,ICMP,ICMPV6等。 |
app |
否 |
String |
应用协议 |
log_id |
否 |
String |
文档ID,第一页为空,其他页不为空,其他页可取上一次查询最后一条数据的log_id |
next_date |
否 |
Long |
下个日期,当是第一页时为空,不是第一页时不为空,其他页可取上一次查询最后一条数据的event_time |
offset |
否 |
Integer |
偏移量:指定返回记录的开始位置,必须为数字,取值范围为大于0,首页时为空,非首页时不为空 |
limit |
是 |
Integer |
每页显示个数,范围为1-1024 |
fw_instance_id |
是 |
String |
防火墙实例id,创建云防火墙后用于标志防火墙由系统自动生成的标志id,可通过调用查询防火墙实例接口。 |
action |
否 |
String |
动作包含permit,deny |
direction |
否 |
String |
方向,包含in2out,out2in |
attack_type |
否 |
String |
入侵事件类型 |
attack_rule |
否 |
String |
入侵事件规则 |
level |
否 |
String |
威胁等级,包括CRITICAL、HIGH、MEDIUM、LOW |
enterprise_project_id |
否 |
String |
企业项目id,用户支持企业项目后,由企业项目生成的id。 |
dst_host |
否 |
String |
目标主机 |
log_type |
否 |
String |
日志类型包括:internet,vpc,nat 枚举值:
|
attack_rule_id |
否 |
String |
入侵事件id |
src_region_name |
否 |
String |
源region名称 |
dst_region_name |
否 |
String |
目的region名称 |
src_province_name |
否 |
String |
源省份名称 |
dst_province_name |
否 |
String |
目的省份名称 |
src_city_name |
否 |
String |
源城市名称 |
dst_city_name |
否 |
String |
目的城市名称 |
请求参数
参数 |
是否必选 |
参数类型 |
描述 |
---|---|---|---|
X-Auth-Token |
是 |
String |
用户Token。 通过调用IAM服务获取用户Token接口获取(响应消息头中X-Subject-Token的值) |
响应参数
状态码: 200
参数 |
参数类型 |
描述 |
---|---|---|
data |
data object |
查询攻击日志返回值 |
参数 |
参数类型 |
描述 |
---|---|---|
total |
Integer |
返回数量 |
limit |
Integer |
每页显示个数,范围为1-1024 |
records |
Array of records objects |
记录 |
参数 |
参数类型 |
描述 |
---|---|---|
direction |
String |
方向,有内到外和外到内两种 枚举值:
|
action |
String |
动作 |
event_time |
Long |
事件时间,以毫秒为单位的时间戳,如1718936272648 |
attack_type |
String |
攻击类型 |
attack_rule |
String |
攻击规则 |
level |
String |
威胁等级 |
source |
String |
来源 |
packet_length |
Long |
报文长度 |
attack_rule_id |
String |
攻击规则id |
hit_time |
Long |
命中时间,以毫秒为单位的时间戳,如1718936272648 |
log_id |
String |
日志ID |
src_ip |
String |
源IP |
src_port |
Integer |
源端口 最小值:0 最大值:65535 |
dst_ip |
String |
目的IP |
dst_port |
Integer |
目的端口 最小值:0 最大值:65535 |
protocol |
String |
协议 |
packet |
String |
攻击日志报文 |
app |
String |
应用协议 |
packetMessages |
Array of PacketMessage objects |
攻击报文信息 |
src_region_id |
String |
源区域id |
src_region_name |
String |
源区域名称 |
dst_region_id |
String |
目的区域id |
dst_region_name |
String |
目的区域名称 |
src_province_id |
String |
源省份id |
src_province_name |
String |
源省份名称 |
src_city_id |
String |
源城市id |
src_city_name |
String |
源城市名称 |
dst_province_id |
String |
目的省份id |
dst_province_name |
String |
目的省份名称 |
dst_city_id |
String |
目的城市id |
dst_city_name |
String |
目的城市名称 |
参数 |
参数类型 |
描述 |
---|---|---|
hex_index |
String |
16进制index |
hexs |
Array of strings |
16进制数列 |
utf8_String |
String |
utf_8字符串 |
状态码: 400
参数 |
参数类型 |
描述 |
---|---|---|
error_code |
String |
错误码 最小长度:8 最大长度:36 |
error_msg |
String |
错误描述 最小长度:2 最大长度:512 |
请求示例
查询项目id为9d80d070b6d44942af73c9c3d38e0429防火墙id为2af58b7c-893c-4453-a984-bdd9b1bd6318初始时间为1663567058000,结束时间为1664171765000的第一页数据,查询条数为10条
https://{Endpoint}/v1/9d80d070b6d44942af73c9c3d38e0429/cfw/logs/attack?fw_instance_id=2af58b7c-893c-4453-a984-bdd9b1bd6318&start_time=1663567058000&end_time=1664171765000&limit=10
响应示例
状态码: 200
OK
{ "data" : { "limit" : 10, "records" : [ { "action" : "deny", "app" : "HTTP", "attack_rule" : "Tool Nmap Web Server Probe Detected", "attack_rule_id" : "336154", "attack_type" : "Web Attack", "direction" : "out2in", "dst_ip" : "100.95.148.49", "dst_port" : 8080, "event_time" : 1664146216000, "level" : "MEDIUM", "log_id" : "15591", "packet" : "+hZUZMhV+hY/AaHMCABFKABpXPNAADAGof1kVe6QZF+UMcTQH5B0wdaz888+uoAYAOVyNQAAAQEICjrmikVb9JLCR0VUIC9uaWNlJTIwcG9ydHMlMkMvVHJpJTZFaXR5LnR4dCUyZWJhayBIVFRQLzEuMA0KDQo=", "packetMessages" : [ { "hex_index" : "00000000", "hexs" : [ "fa", "16", "54", "64", "c8", "55", "fa", "16", "3f", "01", "a1", "cc", "08", "00", "45", "28" ], "utf8_String" : ".\u0016Td.U.\u0016?.....E(" }, { "hex_index" : "00000010", "hexs" : [ "00", "69", "5c", "f3", "40", "00", "30", "06", "a1", "fd", "64", "55", "ee", "90", "64", "5f" ], "utf8_String" : ".i\\.@.0...dU.d_" }, { "hex_index" : "00000020", "hexs" : [ "94", "31", "c4", "d0", "1f", "90", "74", "c1", "d6", "b3", "f3", "cf", "3e", "ba", "80", "18" ], "utf8_String" : ".1..\u001F.t.ֳ..>..." }, { "hex_index" : "00000030", "hexs" : [ "00", "e5", "72", "35", "00", "00", "01", "01", "08", "0a", "3a", "e6", "8a", "45", "5b", "f4" ], "utf8_String" : "..r5......:.E[." }, { "hex_index" : "00000040", "hexs" : [ "92", "c2", "47", "45", "54", "20", "2f", "6e", "69", "63", "65", "25", "32", "30", "70", "6f" ], "utf8_String" : "..GET /nice%20po" }, { "hex_index" : "00000050", "hexs" : [ "72", "74", "73", "25", "32", "43", "2f", "54", "72", "69", "25", "36", "45", "69", "74", "79" ], "utf8_String" : "rts%2C/Tri%6Eity" }, { "hex_index" : "00000060", "hexs" : [ "2e", "74", "78", "74", "25", "32", "65", "62", "61", "6b", "20", "48", "54", "54", "50", "2f" ], "utf8_String" : ".txt%2ebak HTTP/" }, { "hex_index" : "00000070", "hexs" : [ "31", "2e", "30", "0d", "0a", "0d", "0a" ], "utf8_String" : "1.0\r.\r." } ], "packet_length" : 119, "protocol" : "TCP", "source" : "0", "src_ip" : "100.85.238.144", "src_port" : 50384, "src_province_id" : "source province id", "src_province_name" : "source province name", "src_city_id" : "source city id", "src_city_name" : "source city name", "dst_province_id" : "dst province id", "dst_province_name" : "dst province name", "dst_city_id" : "dst city id", "dst_city_name" : "dst city name" } ], "total" : 1 } }
状态码: 400
Bad Request
{ "error_code" : "00500002", "error_msg" : "时间间距错误" }
SDK代码示例
SDK代码示例如下。
Java
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 |
package com.huaweicloud.sdk.test; import com.huaweicloud.sdk.core.auth.ICredential; import com.huaweicloud.sdk.core.auth.BasicCredentials; import com.huaweicloud.sdk.core.exception.ConnectionException; import com.huaweicloud.sdk.core.exception.RequestTimeoutException; import com.huaweicloud.sdk.core.exception.ServiceResponseException; import com.huaweicloud.sdk.cfw.v1.region.CfwRegion; import com.huaweicloud.sdk.cfw.v1.*; import com.huaweicloud.sdk.cfw.v1.model.*; public class ListAttackLogsSolution { public static void main(String[] args) { // The AK and SK used for authentication are hard-coded or stored in plaintext, which has great security risks. It is recommended that the AK and SK be stored in ciphertext in configuration files or environment variables and decrypted during use to ensure security. // In this example, AK and SK are stored in environment variables for authentication. Before running this example, set environment variables CLOUD_SDK_AK and CLOUD_SDK_SK in the local environment String ak = System.getenv("CLOUD_SDK_AK"); String sk = System.getenv("CLOUD_SDK_SK"); ICredential auth = new BasicCredentials() .withAk(ak) .withSk(sk); CfwClient client = CfwClient.newBuilder() .withCredential(auth) .withRegion(CfwRegion.valueOf("<YOUR REGION>")) .build(); ListAttackLogsRequest request = new ListAttackLogsRequest(); request.withStartTime(<start_time>L); request.withEndTime(<end_time>L); request.withSrcIp("<src_ip>"); request.withSrcPort(<src_port>); request.withDstIp("<dst_ip>"); request.withDstPort(<dst_port>); request.withProtocol("<protocol>"); request.withApp("<app>"); request.withLogId("<log_id>"); request.withNextDate(<next_date>L); request.withOffset(<offset>); request.withLimit(<limit>); request.withFwInstanceId("<fw_instance_id>"); request.withAction("<action>"); request.withDirection("<direction>"); request.withAttackType("<attack_type>"); request.withAttackRule("<attack_rule>"); request.withLevel("<level>"); request.withEnterpriseProjectId("<enterprise_project_id>"); request.withDstHost("<dst_host>"); request.withLogType(ListAttackLogsRequest.LogTypeEnum.fromValue("<log_type>")); request.withAttackRuleId("<attack_rule_id>"); request.withSrcRegionName("<src_region_name>"); request.withDstRegionName("<dst_region_name>"); request.withSrcProvinceName("<src_province_name>"); request.withDstProvinceName("<dst_province_name>"); request.withSrcCityName("<src_city_name>"); request.withDstCityName("<dst_city_name>"); try { ListAttackLogsResponse response = client.listAttackLogs(request); System.out.println(response.toString()); } catch (ConnectionException e) { e.printStackTrace(); } catch (RequestTimeoutException e) { e.printStackTrace(); } catch (ServiceResponseException e) { e.printStackTrace(); System.out.println(e.getHttpStatusCode()); System.out.println(e.getRequestId()); System.out.println(e.getErrorCode()); System.out.println(e.getErrorMsg()); } } } |
Python
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 |
# coding: utf-8 import os from huaweicloudsdkcore.auth.credentials import BasicCredentials from huaweicloudsdkcfw.v1.region.cfw_region import CfwRegion from huaweicloudsdkcore.exceptions import exceptions from huaweicloudsdkcfw.v1 import * if __name__ == "__main__": # The AK and SK used for authentication are hard-coded or stored in plaintext, which has great security risks. It is recommended that the AK and SK be stored in ciphertext in configuration files or environment variables and decrypted during use to ensure security. # In this example, AK and SK are stored in environment variables for authentication. Before running this example, set environment variables CLOUD_SDK_AK and CLOUD_SDK_SK in the local environment ak = os.environ["CLOUD_SDK_AK"] sk = os.environ["CLOUD_SDK_SK"] credentials = BasicCredentials(ak, sk) client = CfwClient.new_builder() \ .with_credentials(credentials) \ .with_region(CfwRegion.value_of("<YOUR REGION>")) \ .build() try: request = ListAttackLogsRequest() request.start_time = <start_time> request.end_time = <end_time> request.src_ip = "<src_ip>" request.src_port = <src_port> request.dst_ip = "<dst_ip>" request.dst_port = <dst_port> request.protocol = "<protocol>" request.app = "<app>" request.log_id = "<log_id>" request.next_date = <next_date> request.offset = <offset> request.limit = <limit> request.fw_instance_id = "<fw_instance_id>" request.action = "<action>" request.direction = "<direction>" request.attack_type = "<attack_type>" request.attack_rule = "<attack_rule>" request.level = "<level>" request.enterprise_project_id = "<enterprise_project_id>" request.dst_host = "<dst_host>" request.log_type = "<log_type>" request.attack_rule_id = "<attack_rule_id>" request.src_region_name = "<src_region_name>" request.dst_region_name = "<dst_region_name>" request.src_province_name = "<src_province_name>" request.dst_province_name = "<dst_province_name>" request.src_city_name = "<src_city_name>" request.dst_city_name = "<dst_city_name>" response = client.list_attack_logs(request) print(response) except exceptions.ClientRequestException as e: print(e.status_code) print(e.request_id) print(e.error_code) print(e.error_msg) |
Go
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 |
package main import ( "fmt" "github.com/huaweicloud/huaweicloud-sdk-go-v3/core/auth/basic" cfw "github.com/huaweicloud/huaweicloud-sdk-go-v3/services/cfw/v1" "github.com/huaweicloud/huaweicloud-sdk-go-v3/services/cfw/v1/model" region "github.com/huaweicloud/huaweicloud-sdk-go-v3/services/cfw/v1/region" ) func main() { // The AK and SK used for authentication are hard-coded or stored in plaintext, which has great security risks. It is recommended that the AK and SK be stored in ciphertext in configuration files or environment variables and decrypted during use to ensure security. // In this example, AK and SK are stored in environment variables for authentication. Before running this example, set environment variables CLOUD_SDK_AK and CLOUD_SDK_SK in the local environment ak := os.Getenv("CLOUD_SDK_AK") sk := os.Getenv("CLOUD_SDK_SK") auth := basic.NewCredentialsBuilder(). WithAk(ak). WithSk(sk). Build() client := cfw.NewCfwClient( cfw.CfwClientBuilder(). WithRegion(region.ValueOf("<YOUR REGION>")). WithCredential(auth). Build()) request := &model.ListAttackLogsRequest{} request.StartTime = int64(<start_time>) request.EndTime = int64(<end_time>) srcIpRequest:= "<src_ip>" request.SrcIp = &srcIpRequest srcPortRequest:= int32(<src_port>) request.SrcPort = &srcPortRequest dstIpRequest:= "<dst_ip>" request.DstIp = &dstIpRequest dstPortRequest:= int32(<dst_port>) request.DstPort = &dstPortRequest protocolRequest:= "<protocol>" request.Protocol = &protocolRequest appRequest:= "<app>" request.App = &appRequest logIdRequest:= "<log_id>" request.LogId = &logIdRequest nextDateRequest:= int64(<next_date>) request.NextDate = &nextDateRequest offsetRequest:= int32(<offset>) request.Offset = &offsetRequest request.Limit = int32(<limit>) request.FwInstanceId = "<fw_instance_id>" actionRequest:= "<action>" request.Action = &actionRequest directionRequest:= "<direction>" request.Direction = &directionRequest attackTypeRequest:= "<attack_type>" request.AttackType = &attackTypeRequest attackRuleRequest:= "<attack_rule>" request.AttackRule = &attackRuleRequest levelRequest:= "<level>" request.Level = &levelRequest enterpriseProjectIdRequest:= "<enterprise_project_id>" request.EnterpriseProjectId = &enterpriseProjectIdRequest dstHostRequest:= "<dst_host>" request.DstHost = &dstHostRequest logTypeRequest:= model.GetListAttackLogsRequestLogTypeEnum().<LOG_TYPE> request.LogType = &logTypeRequest attackRuleIdRequest:= "<attack_rule_id>" request.AttackRuleId = &attackRuleIdRequest srcRegionNameRequest:= "<src_region_name>" request.SrcRegionName = &srcRegionNameRequest dstRegionNameRequest:= "<dst_region_name>" request.DstRegionName = &dstRegionNameRequest srcProvinceNameRequest:= "<src_province_name>" request.SrcProvinceName = &srcProvinceNameRequest dstProvinceNameRequest:= "<dst_province_name>" request.DstProvinceName = &dstProvinceNameRequest srcCityNameRequest:= "<src_city_name>" request.SrcCityName = &srcCityNameRequest dstCityNameRequest:= "<dst_city_name>" request.DstCityName = &dstCityNameRequest response, err := client.ListAttackLogs(request) if err == nil { fmt.Printf("%+v\n", response) } else { fmt.Println(err) } } |
更多
更多编程语言的SDK代码示例,请参见API Explorer的代码示例页签,可生成自动对应的SDK代码示例。
状态码
状态码 |
描述 |
---|---|
200 |
OK |
400 |
Bad Request |
401 |
Unauthorized |
403 |
Forbidden |
404 |
Not Found |
500 |
Internal Server Error |
错误码
请参见错误码。