Help Center/ GaussDB/ Feature Guide(Distributed_8.x)/ Partitioned Table/ Partitioned Table Query Optimization/ Partition Pruning/ Dynamic Partition Pruning/ Dynamic PBE Pruning
Updated on 2024-06-07 GMT+08:00
View PDF
Share

Dynamic PBE Pruning

Dynamic PBE pruning is supported in the following scenarios:
  1. Supported partitioning types: range partitioning, hash partitioning, and list partitioning.
  2. Supported expression types: comparison expression (<, <=, =, >=, >), logical expression, and array expression.
  3. Supported implicit conversions and functions: some type conversions and the IMMUTABLE function.
  • Dynamic PBE pruning supports expressions, implicit conversions, the IMMUTABLE function, and the STABLE function, but does not support subquery expressions or VOLATILE function. For the STABLE function, type conversion functions such as to_timestamp may be affected by GUC parameters and lead to different pruning results. To ensure performance optimization, you can analyze table to regenerate a Gplan.
  • Dynamic PBE pruning is based on the generic plan. Therefore, when determining whether a statement can be dynamically pruned, you need to set plan_cache_mode to 'force_generic_plan' to eliminate the interference of the custom plan.
  • Typical scenarios where dynamic PBE pruning is supported are as follows:
    1. Comparison expressions 
      gaussdb=#
-- Create a partitioned table.
CREATE TABLE t1 (c1 int, c2 int)
PARTITION BY RANGE (c1)
(
    PARTITION p1 VALUES LESS THAN(10),
    PARTITION p2 VALUES LESS THAN(20),
    PARTITION p3 VALUES LESS THAN(MAXVALUE)
);

gaussdb=# PREPARE p1(int) AS SELECT * FROM t1 WHERE c1 = $1;
PREPARE
gaussdb=# EXPLAIN (VERBOSE ON, COSTS OFF) EXECUTE p1(1);
                         QUERY PLAN                         
------------------------------------------------------------
 Data Node Scan
   Output: t1.c1, t1.c2
   Node/s: datanode1
   Node expr: $1
   Remote query: SELECT c1, c2 FROM public.t1 WHERE c1 = $1

 Remote SQL: SELECT c1, c2 FROM public.t1 WHERE c1 = $1
 Datanode Name: datanode1
   Partition Iterator
     Output: c1, c2
     Iterations: PART
     ->  Partitioned Seq Scan on public.t1
           Output: c1, c2
           Filter: (t1.c1 = $1)
           Selected Partitions:  1 (pbe-pruning)

(16 rows)
    2. Logical expressions 
      gaussdb=# PREPARE p2(INT, INT) AS SELECT * FROM t1 WHERE c1 = $1 AND c2 = $2;
PREPARE
gaussdb=# EXPLAIN (VERBOSE ON, COSTS OFF) EXECUTE p2(1, 2);
                               QUERY PLAN                               
------------------------------------------------------------------------
 Data Node Scan
   Output: t1.c1, t1.c2
   Node/s: datanode1
   Node expr: $1
   Remote query: SELECT c1, c2 FROM public.t1 WHERE c1 = $1 AND c2 = $2

 Remote SQL: SELECT c1, c2 FROM public.t1 WHERE c1 = $1 AND c2 = $2
 Datanode Name: datanode1
   Partition Iterator
     Output: c1, c2
     Iterations: PART
     ->  Partitioned Seq Scan on public.t1
           Output: c1, c2
           Filter: ((t1.c1 = $1) AND (t1.c2 = $2))
           Selected Partitions:  1 (pbe-pruning)

(16 rows)
    3. Implicit type conversion 
      gaussdb=# set plan_cache_mode = 'force_generic_plan';
gaussdb=# PREPARE p3(TEXT) AS SELECT * FROM t1 WHERE c1 = $1;
PREPARE
gaussdb=# EXPLAIN (VERBOSE ON, COSTS OFF) EXECUTE p3('12');
                             QUERY PLAN                             
--------------------------------------------------------------------
 Data Node Scan
   Output: t1.c1, t1.c2
   Node/s: datanode1
   Node expr: $1
   Remote query: SELECT c1, c2 FROM public.t1 WHERE c1 = $1::bigint

 Remote SQL: SELECT c1, c2 FROM public.t1 WHERE c1 = $1::bigint
 Datanode Name: datanode1
   Partition Iterator
     Output: c1, c2
     Iterations: PART
     ->  Partitioned Seq Scan on public.t1
           Output: c1, c2
           Filter: (t1.c1 = ($1)::bigint)
           Selected Partitions:  2 (pbe-pruning)

(16 rows)
  • Typical scenarios where dynamic PBE pruning is not supported are as follows:
    1. Subquery expressions 
      gaussdb=# PREPARE p4(INT) AS SELECT * FROM t1 WHERE c1 = ALL(SELECT c2 FROM t1 WHERE c1 > $1);
PREPARE
gaussdb=# EXPLAIN (VERBOSE ON, COSTS OFF) EXECUTE p4(1);
                               QUERY PLAN                                
-------------------------------------------------------------------------
 Streaming (type: GATHER)
   Output: public.t1.c1, public.t1.c2
   Node/s: All datanodes
   ->  Partition Iterator
         Output: public.t1.c1, public.t1.c2
         Iterations: 3
         ->  Partitioned Seq Scan on public.t1
               Output: public.t1.c1, public.t1.c2
               Distribute Key: public.t1.c1
               Filter: (SubPlan 1)
               Selected Partitions:  1..3
               SubPlan 1
                 ->  Materialize
                       Output: public.t1.c2
                       ->  Streaming(type: BROADCAST)
                             Output: public.t1.c2
                             Spawn on: All datanodes
                             Consumer Nodes: All datanodes
                             ->  Partition Iterator
                                   Output: public.t1.c2
                                   Iterations: 3
                                   ->  Partitioned Seq Scan on public.t1
                                         Output: public.t1.c2
                                         Distribute Key: public.t1.c1
                                         Filter: (public.t1.c1 > 1)
                                         Selected Partitions:  1..3
(26 rows)
    2. Implicit type conversion failure 
      gaussdb=# PREPARE p5(name) AS SELECT * FROM t1 WHERE c1 = $1;
PREPARE
gaussdb=# EXPLAIN (VERBOSE ON, COSTS OFF) EXECUTE p5('12');
                                QUERY PLAN                                
--------------------------------------------------------------------------
 Data Node Scan
   Output: t1.c1, t1.c2
   Node/s: All datanodes
   Remote query: SELECT c1, c2 FROM public.t1 WHERE c1::text = '12'::text

 Remote SQL: SELECT c1, c2 FROM public.t1 WHERE c1::text = '12'::text
 Datanode Name: datanode1
   Partition Iterator
     Output: c1, c2
     Iterations: 3
     ->  Partitioned Seq Scan on public.t1
           Output: c1, c2
           Filter: ((t1.c1)::text = '12'::text)
           Selected Partitions:  1..3

(15 rows)
    3. STABLE and VOLATILE functions 
      gaussdb=# create sequence seq;
gaussdb=# PREPARE p6(TEXT) AS SELECT * FROM t1 WHERE c1 = currval($1);-- The VOLATILE function does not support pruning.
PREPARE
gaussdb=# EXPLAIN (VERBOSE ON, COSTS OFF) EXECUTE p6('seq');
                                 QUERY PLAN                                 
----------------------------------------------------------------------------
 Data Node Scan
   Output: t1.c1, t1.c2
   Node/s: All datanodes
   Remote query: SELECT c1, c2 FROM ONLY public.t1 WHERE true
   Coordinator quals: ((t1.c1)::numeric = currval(('seq'::text)::regclass))

 Remote SQL: SELECT c1, c2 FROM ONLY public.t1 WHERE true
 Datanode Name: datanode1
   Partition Iterator
     Output: c1, c2
     Iterations: 3
     ->  Partitioned Seq Scan on public.t1
           Output: c1, c2
           Selected Partitions:  1..3

(15 rows)

-- Clean up the environment.
gaussdb=# DROP TABLE t1;