ALTER ROLE

Function

ALTER ROLE changes the attributes of a role.

Important Notes

None

Syntax

• Modifying the Rights of a Role

  1	ALTER ROLE role_name [ [ WITH ] option [ ... ] ];

  The option clause for granting rights is as follows:

  1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

  {CREATEDB | NOCREATEDB} | {CREATEROLE | NOCREATEROLE} | {INHERIT | NOINHERIT} | {AUDITADMIN | NOAUDITADMIN} | {SYSADMIN | NOSYSADMIN} | {USEFT | NOUSEFT} | {LOGIN | NOLOGIN} | {REPLICATION | NOREPLICATION} | {INDEPENDENT | NOINDEPENDENT} | {VCADMIN | NOVCADMIN} | CONNECTION LIMIT connlimit | [ ENCRYPTED | UNENCRYPTED ] PASSWORD 'password' | [ ENCRYPTED | UNENCRYPTED ] IDENTIFIED BY 'password' [ REPLACE 'old_password' ] | [ ENCRYPTED | UNENCRYPTED ] PASSWORD { 'password' | DISABLE } | [ ENCRYPTED | UNENCRYPTED ] IDENTIFIED BY { 'password' [ REPLACE 'old_password' ] | DISABLE } | VALID BEGIN 'timestamp' | VALID UNTIL 'timestamp' | RESOURCE POOL 'respool' | USER GROUP 'groupuser' | PERM SPACE 'spacelimit' | TEMP SPACE 'tmpspacelimit' | SPILL SPACE 'spillspacelimit' | NODE GROUP logic_cluster_name | ACCOUNT { LOCK | UNLOCK } | PGUSER | AUTHINFO 'authinfo' | PASSWORD EXPIRATION period

• Rename a role.

  1 2	ALTER ROLE role_name RENAME TO new_name;

• Set parameters for a role.

  1 2	ALTER ROLE role_name [ IN DATABASE database_name ] SET configuration_parameter {{ TO | = } { value | DEFAULT } | FROM CURRENT};

• Reset parameters for a role.

  1 2	ALTER ROLE role_name [ IN DATABASE database_name ] RESET {configuration_parameter|ALL};

Parameters

• role_name

  Indicates a role name.

  Value range: an existing user name

• new_name

  Indicates the new name of a role.

  Value range: a string. It must comply with the naming convention. and can contain a maximum of 63 characters.

• CREATEDB | NOCREATEDB

  Defines a role's ability to create databases.

  A new role does not have the permission to create databases.

  Value range: If not specified, NOCREATEDB is the default.

• CREATEROLE | NOCREATEROLE

  Determines whether a role will be permitted to create new roles (that is, execute CREATE ROLE and CREATE USER). A role with the CREATEROLE permission can also modify and delete other roles.

  Value range: If not specified, NOCREATEROLE is the default.

• INHERIT | NOINHERIT

  Determines whether the role can inherit permissions of its group. You are not advised to execute them.

• AUDITADMIN | NOAUDITADMIN

  Determines whether a role has the audit and management attributes.

  If not specified, NOAUDITADMIN is the default.

• SYSADMIN | NOSYSADMIN

  Determines whether a new role is a system administrator. Roles having the SYSADMIN attribute have the highest permission.

  Value range: If not specified, NOSYSADMIN is the default.

• USEFT | NOUSEFT

  Determines whether a new role can perform operations on foreign tables, such as creating, deleting, modifying, and reading/witting foreign tables.

  A new role does not have permissions for these operations.

  The default value is NOUSEFT, indicating that a new role cannot perform operations on foreign tables by default.

• LOGIN | NOLOGIN

  Determines whether a role is allowed to log in to a database. A role having the LOGIN attribute can be thought of as a user.

  Value range: If not specified, NOLOGIN is the default.

• REPLICATION | NOREPLICATION

  Determines whether a role is allowed to initiate streaming replication or put the system in and out of backup mode. A role having the REPLICATION attribute is a highly privileged role, and should only be used on roles used for replication.

  If not specified, NOREPLICATION is the default.

• INDEPENDENT | NOINDEPENDENT

  Defines private, independent roles. For a role with the INDEPENDENT attribute, administrators' rights to control and access this role are separated. Specific rules are as follows:

  • Administrators have no rights to add, delete, query, modify, copy, or authorize the corresponding table objects without the authorization from the INDEPENDENT role.
  • Administrators have no rights to modify the inheritance relationship of the INDEPENDENT role without the authorization from this role.
  • Administrators have no rights to modify the owner of the table objects for the INDEPENDENT role.
  • Administrators have no rights to delete the INDEPENDENT attribute of the INDEPENDENT role.
  • Administrators have no rights to change the database password of the INDEPENDENT role. The INDEPENDENT role must manage its own password, which cannot be reset if lost.
  • The SYSADMIN attribute of a user cannot be changed to the INDEPENDENT attribute.
• VCADMIN | NOVCADMIN

  Defines the role of a logical cluster administrator. A logical cluster administrator has the following more permissions than common users:

  • Create, modify, and delete resource pools in the associated logical cluster.
  • Grant the access permission for the associated logical cluster to other users or roles, or reclaim the access permission from those users or roles.
• CONNECTION LIMIT

  Indicates how many concurrent connections the role can use on a single CN.

  Value range: Integer, >=-1. The default value is -1, which means unlimited.

  

  To ensure the proper running of a cluster, the minimum value of CONNECTION LIMIT is the number of CNs in the cluster, because when a cluster runs ANALYZE on a CN, other CNs will connect to the running CN for metadata synchronization. For example, if there are three CNs in the cluster, set CONNECTION LIMIT to 3 or a larger value.

• ENCRYPTED | UNENCRYPTED

  Determines whether the password stored in the system will be encrypted. (If neither is specified, the password status is determined by password_encryption_type.) According to product security requirements, the password must be stored encrypted. Therefore, UNENCRYPTED is forbidden in GaussDB(DWS). If the password is encrypted using SHA256, it will be stored as it is, regardless of whether it is specified as ENCRYPTED or UNENCRYPTED. This is because the system cannot decrypt the specified encrypted password. This allows reloading of the encrypted password during dump/restore.

  • password

    Specifies the login password.

    The password must contain at least eight characters by default and cannot be the same as the username or the username spelled backwards. The password must contain at least three of the four types of characters: uppercase letters (A-Z), lowercase letters (a-z), digits (0-9), and non-alphanumeric characters (~!@#$ %^&*()-_=+\|[{}];:,<.>/?) If you use characters other than the four types, a warning is displayed, but you can still create the password.

    Value range: a string

  • DISABLE

    By default, you can change your password unless it is disabled. Use this parameter to disable the password of a user. After the password of a user is disabled, the password will be deleted from the system. The user can connect to the database only through external authentication, for example, IAM authentication, Kerberos authentication, or LDAP authentication. Only administrators can enable or disable a password. Common users cannot disable the password of an initial user. To enable a password, run ALTER USER and specify the password.

• VALID BEGIN

  Sets a date and time when the role's password becomes valid. If this clause is omitted, the password will be valid for all time.

• VALID UNTIL

  Sets a date and time after which the role's password is no longer valid. If this clause is omitted, the password will be valid for all time.

• RESOURCE POOL

  Sets the name of resource pool used by the role, and the name belongs to the system catalog: pg_resource_pool.

• USER GROUP 'groupuser'

  Creates a sub-user.

• PERM SPACE

  Sets the storage space of the user permanent table.

  space_limit: specifies the upper limit of the storage space of the permanent table. Value range: A string consists of an integer and unit. The unit can be K/M/G/T/P currently. 0 indicates no limits.

• TEMP SPACE

  Sets the storage space of the user temporary table.

  tmpspacelimit: specifies the storage space limit of the temporary table. Value range: A string consists of an integer and unit. The unit can be K/M/G/T/P currently. 0 indicates no limits.

• SPILL SPACE

  Sets the operator disk flushing space of the user.

  spillspacelimit: specifies the operator spilling space limit. Value range: A string consists of an integer and unit. The unit can be K/M/G/T/P currently. 0 indicates no limits.

• NODE GROUP

  Specifies the name of the logical cluster associated with a user. If the name contains uppercase characters or special characters, enclose the name with double quotation marks.

• ACCOUNT LOCK | ACCOUNT UNLOCK
  • ACCOUNT LOCK: locks an account to forbid login to databases.
  • ACCOUNT UNLOCK: unlocks an account to allow login to databases.
• PGUSER

  This attribute is used to be compatible with open-source Postgres communication. An open-source Postgres client interface (Postgres 9.2.19 is recommended) can use a database user having this attribute to connect to the database.

  PGUSER of a role cannot be modified in the current version.

  

  This attribute only ensures compatibility with the connection process. Incompatibility caused by kernel differences between this product and Postgres cannot be solved using this attribute.

  Users having the PGUSER attribute are authenticated in a way different from other users. Error information reported by the open-source client may cause the attribute to be enumerated. Therefore, you are advised to use a client of this product. Example:

  1 2 3 4 5 6 7

  # normaluser is a user that does not have the PGUSER attribute. psql is the Postgres client tool. pg@dws04:~> psql -d postgres -p 8000 -h 10.11.12.13 -U normaluser psql: authentication method 10 not supported # pguser is a user having the PGUSER attribute. pg@dws04:~> psql -d postgres -p 8000 -h 10.11.12.13 -U pguser Password for user pguser:

• AUTHINFO 'authinfo'

  This attribute is used to specify the role authentication type. authinfo is the description character string, which is case sensitive. Only the LDAP type is supported. Its description character string is ldap. LDAP authentication is an external authentication mode. Therefore, PASSWORD DISABLE must be specified.

  

  • Additional information about LDAP authentication can be added to authinfo, for example, fulluser in LDAP authentication, which is equivalent to ldapprefix+username+ldapsuffix. If the content of authinfo is ldap, the role authentication type is LDAP. In this case, the ldapprefix and ldapsuffix information is provided by the corresponding record in the pg_hba.conf file.
  • When executing the ALTER ROLE command, users are not allowed to change the authentication type. Only LDAP users are allowed to modify LDAP attributes.
• PASSWORD EXPIRATION period

  Number of days before the login password of the role expires. The user needs to change the password in time before the login password expires. If the login password expires, the user cannot log in to the system. In this case, the user needs to ask the administrator to set a new login password.

  Value range: an integer ranging from -1 to 999. The default value is -1, indicating that there is no restriction. The value 0 indicates that the login password expires immediately.

• IN DATABASE database_name

  Modifies the parameters of a role on a specified database.

• SET configuration_parameter

  Sets parameters for a role. The session parameters modified using the ALTER ROLE command is only for a specific role and is valid in the next session triggered by the role.

  Valid value:

  Values of configuration_parameter and value are listed in SET.

  DEFAULT clears the value of configuration_parameter. The value of the configuration_parameter parameter will inherit the default value of the new session generated for the role.

  FROM CURRENT uses the value of configuration_parameter of the current session.

• RESET configuration_parameter/ALL

  The effect of clearing the configuration_parameter value is the same as setting it to DEFAULT.

  Value range: ALL indicates that all parameter values are cleared.

Example

Modify the login permission of role manager.

1

ALTER ROLE manager login;

Change the password of role manager:

1

ALTER ROLE manager IDENTIFIED BY '{password}' REPLACE '{old_password}';

Alter role manager to the system administrator:

1

ALTER ROLE manager SYSADMIN;

Modify the fulluser information of the LDAP authentication role:

1

ALTER ROLE role2 WITH LOGIN AUTHINFO 'ldapcn=role2,cn=user2,dc=func,dc=com' PASSWORD DISABLE;

Change the validity period of the login password of the role to 90 days:

1

ALTER ROLE role3 PASSWORD EXPIRATION 90;

Links

CREATE ROLE, DROP ROLE, SET