Help Center/ Huawei HiLens/ FAQs/ FAQs/ Device Registration/ What Are the Differences Between Using IES and SSH to Register a HiLens Kit Device?
Updated on 2024-10-28 GMT+08:00
View PDF
Share

What Are the Differences Between Using IES and SSH to Register a HiLens Kit Device?

Registering a Device Using SSH

This option allows you to register a HiLens Kit device by logging in to the HiLens Kit system over SSH, running Linux commands, and modifying system configuration files.

Figure 1 shows the registration procedure. Table 1 describes the procedure in detail.

Figure 1 Procedure for registering a device using SSH
Table 1 Procedure description

Procedure

Description

Instructions

Connect a HiLens Kit device to your local PC.

The first thing you should do is to connect your HiLens Kit device to your PC and upgrade the system firmware to version 2.2.200.011.

Connecting a HiLens Kit Device to a PC

Configure the network.

Configure a wireless or wired network to connect the device to the router.

You can only connect your device to a router through a wireless or wired network. If you use a wireless network, the default gateway will be automatically deleted. You need to reconfigure the default gateway when you plan to use a wired network for connection. It is recommended that you use a wireless network. In this way, you do not need to remember the device IP address.

"User Guide > Wireless Network Configuration"

User Guide > Wired Network Configuration

Register the HiLens Kit device.

Register the device with the console and check the device status on the console.

Registering a Device Using SSH
Parent topic: Device Registration