Help Center/ Object Storage Service/ SDK Reference/ Java/ Object Upload (SDK for Java)/ Uploading an Object - Streaming (SDK for Java)
Updated on 2024-12-11 GMT+08:00
View PDF
Share

Uploading an Object - Streaming (SDK for Java)

Function

This API uploads a local file to OBS over the Internet. These files can be texts, images, videos, or any other type of files.

You can upload texts, images, videos, or any other types of files smaller than 5 GB. In a streaming upload, java.io.InputStream is used as the object data source. You can call ObsClient.putObject to upload data streams to OBS.

If you have any questions during development, post them on the Issues page of GitHub.

Restrictions

Method

obsClient.putObject(PutObjectRequest request)

Request Parameters

Table 1 List of request parameters

Parameter

Type

Mandatory (Yes/No)

Description

request

PutObjectRequest

Yes

Explanation:

Request parameters for uploading an object. For details, see Table 2.
Table 2 PutObjectRequest

Parameter

Type

Mandatory (Yes/No)

Description

bucketName

String

Yes

Explanation:

Bucket name.

Restrictions:

  • A bucket name must be unique across all accounts and regions.
  • A bucket name:
    • Must be 3 to 63 characters long and start with a digit or letter. Lowercase letters, digits, hyphens (-), and periods (.) are allowed.
    • Cannot be formatted as an IP address.
    • Cannot start or end with a hyphen (-) or period (.).
    • Cannot contain two consecutive periods (..), for example, my..bucket.
    • Cannot contain periods (.) and hyphens (-) adjacent to each other, for example, my-.bucket or my.-bucket.
  • If you repeatedly create buckets of the same name in the same region, no error will be reported and the bucket attributes comply with those set in the first creation request.

Default value:

None

objectKey

String

Yes

Explanation:

Object name. An object is uniquely identified by an object name in a bucket. An object name is a complete path that does not contain the bucket name.

For example, if the address for accessing the object is examplebucket.obs.ap-southeast-1.myhuaweicloud.com/folder/test.txt, the object name is folder/test.txt.

Value range:

The value must contain 1 to 1,024 characters.

Default value:

None

metadata

ObjectMetadata

No

Explanation:

Object metadata. For details, see Table 4.

Default value:

None

acl

AccessControlList

No

Explanation:

ACL that can be pre-defined when an object is created. Refer to Table 6 to choose the option you need. For details about ACLs, see ACLs.

Value range:

  • To use a pre-defined ACL, see Table 3 for the available policies.
  • To use a user-defined ACL, see Table 6 to configure the required parameters.

Default value:

None

sseKmsHeader

SseKmsHeader

No

Explanation:

Information about the server-side encryption header. For details, see Table 14.

Default value:

None

sseCHeader

SseCHeader

No

Explanation:

Information about the server-side encryption header. For details, see Table 13.

Default value:

None

input

java.io.InputStream

No

Explanation:

Data stream of the object to be uploaded.

Default value:

None

file

java.io.File

No

Explanation:

File stream of the object to be uploaded.

Default value:

None

extensionPermissionMap

Map<ExtensionObjectPermissionEnum, Set<String>>

No

Explanation:

A permission map for granting bucket ACL permissions to one or more accounts. ExtensionObjectPermissionEnum specifies the permissions to grant, and Set<String> describes the list of account IDs (indicated by domain_id) the granted permissions apply to.

Value range:

Default value:

None

expires

int

No

Explanation:

Expiration time of the object. The calculation starts from the time when the object was last modified. Once the object expires, it is automatically deleted.

Restrictions:

This parameter can be configured when uploading an object or using the x-obs-expires header in a metadata API call.

Value range:

An integer greater than 0, in days

Default value:

None

progressListener

ProgressListener

No

Explanation:

Upload progress. For details, see Table 18.

encodeHeaders

boolean

No

Explanation:

Whether to enable OBS to automatically encode request headers.

Due to HTTP coding restrictions, only ASCII characters can be sent. If your request headers contain full-width characters, the SDK will URL encode these characters before sending the request. When you use a browser to access the object metadata, the browser automatically decodes the data.

Value range:

true: Encoding with SDK is enabled.

false: Encoding with SDK is disabled.

Default value:

true
Table 3 ACL

Constant

Description

AccessControlList.REST_CANNED_PRIVATE

Private read/write.

A bucket or object can only be accessed by its owner.

AccessControlList.REST_CANNED_PUBLIC_READ

Public read.

If this permission is granted on a bucket, anyone can read the object list, multipart uploads, bucket metadata, and object versions in the bucket.

If this permission is granted on an object, anyone can read the content and metadata of the object.

AccessControlList.REST_CANNED_PUBLIC_READ_WRITE

Public read/write.

If this permission is granted on a bucket, anyone can read the object list, multipart uploads, and bucket metadata, and can upload or delete objects, initiate multipart uploads, upload parts, assemble parts, copy parts, and abort multipart upload tasks.

If this permission is granted on an object, anyone can read the content and metadata of the object.

AccessControlList.REST_CANNED_PUBLIC_READ_DELIVERED

Public read on a bucket as well as objects in the bucket.

If this permission is granted on a bucket, anyone can read the object list, multipart tasks, and bucket metadata, and can also read the content and metadata of the objects in the bucket.

This permission cannot be granted on objects.

AccessControlList.REST_CANNED_PUBLIC_READ_WRITE_DELIVERED

Public read/write on a bucket as well as objects in the bucket.

If this permission is granted on a bucket, anyone can read the object list, multipart uploads, and bucket metadata, and can upload or delete objects, initiate multipart upload tasks, upload parts, assemble parts, copy parts, and abort multipart uploads. They can also read the content and metadata of the objects in the bucket.

This permission cannot be granted on objects.
Table 4 ObjectMetadata

Parameter

Type

Mandatory (Yes/No)

Description

contentLength

Long

No

Explanation:

Size of the object.

Restrictions:

  • The object size in a single upload ranges from 0 to 5 GB.
  • To upload files larger than 5 GB, multipart uploads should be used.

Default value:

If this parameter is not specified, the SDK automatically calculates the size of the object.

contentType

String

No

Explanation:

Multipurpose Internet Mail Extensions (MIME) type of the object to be uploaded. MIME type is a standard way of describing a data type and is used by the browser to decide how to display data.

Value range:

See What Is Content-Type (MIME)? (Java SDK)

Default value:

If this parameter is not specified, the SDK determines the file type based on the suffix of the object name and assigns a value to the parameter. For example, if the suffix of the object name is .xml, the object is an application/xml file. If the suffix is .html, the object is a text/html file.

contentEncoding

String

No

Explanation:

Content-Encoding header in the response. It specifies which encoding is applied to the object.

Default value:

None

contentDisposition

String

No

Explanation:

Provides a default file name for the requested object. When the object with the default file name is being downloaded or accessed, the content is displayed as part of a web page in the browser or as an attachment in a download dialog box.

Default value:

None

cacheControl

String

No

Explanation:

Cache-Control header in the response. It specifies the cache behavior of the web page when an object is downloaded.

Default value:

None

contentLanguage

String

No

Explanation:

Language or language combination for visitors to customize and use. For details, see the definition of ContentLanguage in the HTTP protocol.

Default value:

None

expires

String

No

Explanation:

The time a cached web page object expires.

Restrictions:

The time must be in the GMT format.

Default value:

None

contentMd5

String

No

Explanation:

Base64-encoded MD5 value of the object data. It is provided for the OBS server to verify data integrity. The OBS server will compare this MD5 value with the MD5 value calculated based on the object data. If the two values are not the same, HTTP status code 400 is returned.

Restrictions:

  • The MD5 value of the object must be Base64 encoded.
  • If the MD5 value is not specified, the OBS server will not verify the MD5 value of the object.

Value range:

Base64-encoded 128-bit MD5 value of the request body calculated according to RFC 1864.

Example: n58IG6hfM7vqI4K0vnWpog==

Default value:

None

storageClass

StorageClassEnum

No

Explanation:

Object storage class that can be specified at object creation. If this parameter is not specified, the object inherits the storage class of the bucket where it is to be uploaded by default.

Value range:

See Table 21.

Default value:

None

webSiteRedirectLocation

String

No

Explanation:

If the bucket is configured with website hosting, the request for obtaining the object can be redirected to another object in the bucket or an external URL. This parameter specifies the address the request for the object is redirected to.

The request is redirected to an object anotherPage.html in the same bucket:

WebsiteRedirectLocation:/anotherPage.html

The request is redirected to an external URL http://www.example.com/:

WebsiteRedirectLocation:http://www.example.com/

Restrictions:

  • The value must start with a slash (/), http://, or https:// and cannot exceed 2 KB.
  • OBS only supports redirection for objects in the root directory of a bucket.

Default value:

None

nextPosition

long

No

Explanation:

Start position for the next append upload.

Value range:

0 to the object length, in bytes.

Default value:

None

appendable

boolean

No

Explanation:

Whether the object is appendable.

Value range:

true: The object is appendable.

false: The object is not appendable.

Default value:

None

userMetadata

Map<String, Object>

No

Explanation:

User-defined metadata of the object. To define it, you can add a header starting with x-obs-meta- in the request. In Map, the String key indicates the name of the user-defined metadata that starts with x-obs-meta-, and the Object value indicates the value of the user-defined metadata. To obtain the user-defined metadata of an object, use ObsClient.getObjectMetadata. For details, see Obtaining Object Metadata (SDK for Java).

Restrictions:

  • An object can have multiple pieces of metadata. The size of the metadata cannot exceed 8 KB in total.
  • When you call ObsClient.getObject to download an object, its user-defined metadata will also be downloaded.

Default value:

None
Table 5 ExtensionObjectPermissionEnum

Constant

Description

GRANT_READ

Grants a specific tenant the permissions to read the object and object metadata.

GRANT_READ_ACP

Grants a specific tenant the permissions to obtain the object ACL.

GRANT_WRITE_ACP

Grants a specific tenant the permissions to write the object ACL.

GRANT_FULL_CONTROL

Grants a specific tenant the permissions to read the content, metadata, and ACL of the object and write the object ACL.
Table 6 AccessControlList

Parameter

Type

Mandatory (Yes/No)

Type

owner

Owner

No

Explanation:

Bucket owner information. For details, see Table 11.

delivered

boolean

No

Explanation:

Whether the bucket ACL is applied to all objects in the bucket.

Value range:

true: The bucket ACL is applied to all objects in the bucket.

false: The bucket ACL is not applied to any objects in the bucket.

Default value:

false

grants

Set<GrantAndPermission>

No

Explanation:

Grantee information. For details, see Table 7.
Table 7 GrantAndPermission

Parameter

Type

Mandatory (Yes/No)

Description

grantee

GranteeInterface

Yes

Explanation:

Grantees (users or user groups). For details, see Table 8.

permission

Permission

Yes

Explanation:

Permissions to grant.

Value range:

See Table 12.

Default value:

None

delivered

boolean

No

Explanation:

Whether the bucket ACL is applied to all objects in the bucket.

Value range:

true: The bucket ACL is applied to all objects in the bucket.

false: The bucket ACL is not applied to any objects in the bucket.

Default value:

false
Table 8 GranteeInterface

Parameter

Type

Mandatory (Yes/No)

Description

CanonicalGrantee

CanonicalGrantee

Yes

Explanation:

Grantee (user) information. For details, see Table 9.

GroupGrantee

GroupGrantee

Yes

Explanation:

Grantee (user group) information.

Value range:

See Table 10.

Default value:

None
Table 9 CanonicalGrantee

Parameter

Type

Mandatory (Yes/No)

Description

grantId

String

Yes if Type is set to GranteeUser

Explanation:

Account (domain) ID of the grantee.

Value range:

To obtain the account ID, see How Do I Get My Account ID and User ID?

Default value:

None

displayName

String

No

Parameter description:

Account name of the grantee.

Value range:

To obtain the account name, see How Do I Get My Account ID and User ID?

Default value:

None
Table 10 GroupGrantee

Constant

Description

ALL_USERS

All users.

AUTHENTICATED_USERS

Authorized users. This constant is deprecated.

LOG_DELIVERY

Log delivery group. This constant is deprecated.
Table 11 Owner

Parameter

Type

Mandatory (Yes/No)

Description

id

String

Yes

Explanation:

Account (domain) ID of the bucket owner.

Value range:

To obtain the account ID, see How Do I Get My Account ID and User ID?

Default value:

None

displayName

String

No

Explanation:

Account name of the owner.

Value range:

To obtain the account name, see How Do I Get My Account ID and User ID?

Default value:

None
Table 12 Permission

Constant

Default Value

Description

PERMISSION_READ

READ

Read permission.

A grantee with this permission for a bucket can obtain the list of objects, multipart uploads, bucket metadata, and object versions in the bucket.

A grantee with this permission for an object can obtain the object content and metadata.

PERMISSION_WRITE

WRITE

Write permission.

A grantee with this permission for a bucket can upload, overwrite, and delete any object or part in the bucket.

This permission is not available for objects.

PERMISSION_READ_ACP

READ_ACP

Permission to read an ACL.

A grantee with this permission can obtain the ACL of a bucket or object.

A bucket or object owner has this permission for their bucket or object by default.

PERMISSION_WRITE_ACP

WRITE_ACP

Permission to modify an ACL.

A grantee with this permission can update the ACL of a bucket or object.

A bucket or object owner has this permission for their bucket or object by default.

This permission allows the grantee to change the access control policies, meaning the grantee has full control over a bucket or object.

PERMISSION_FULL_CONTROL

FULL_CONTROL

Full control access, including read and write permissions for a bucket and its ACL, or for an object and its ACL.

A grantee with this permission for a bucket has READ, WRITE, READ_ACP, and WRITE_ACP permissions for the bucket.

A grantee with this permission for an object has READ, READ_ACP, and WRITE_ACP permissions for the object.
Table 13 SseCHeader

Parameter

Type

Mandatory (Yes/No)

Description

algorithm

ServerAlgorithm

Yes

Explanation:

SSE-C is used for encrypting objects on the server side.

Value range:

AES256, indicating Advanced Encryption Standard (AES) is used to encrypt the object in SSE-C. For details, see Table 17.

Default value:

None

sseAlgorithm

SSEAlgorithmEnum

No

Explanation:

Encryption algorithm.

Restrictions:

AES256

Value range:

See Table 16.

Default value:

None

sseCKey

byte[]

Yes

Explanation:

Key used for encrypting the object when SSE-C is used, in byte[] format.

Default value:

None

sseCKeyBase64

String

No

Explanation:

Base64-encoded key used for encrypting the object when SSE-C is used.

Default value:

None
Table 14 SseKmsHeader

Parameter

Type

Mandatory (Yes/No)

Description

encryption

ServerEncryption

Yes

Explanation:

SSE-KMS is used for encrypting objects on the server side.

Value range:

kms. For details, see Table 15.

Default value:

None

sseAlgorithm

SSEAlgorithmEnum

No

Explanation:

Encryption algorithm.

Restrictions:

Only KMS is supported.

Value range:

See Table 16.

Default value:

None

kmsKeyId

String

No

Explanation:

ID of the KMS master key when SSE-KMS is used.

Value range:

Valid value formats are as follows:

  1. regionID:domainID:key/key_id
  2. key_id

In the preceding formats:

Default value:

  • If this parameter is not specified, the default master key will be used.
  • If there is no such a default master key, OBS will create one and use it by default.
Table 15 ServerEncryption

Constant

Default Value

OBS_KMS

kms
Table 16 SSEAlgorithmEnum

Constant

Default Value

KMS

kms

AES256

AES256
Table 17 ServerAlgorithm

Constant

Default Value

AES256

AES256
Table 18 ProgressListener

Method

Return Value Type

Mandatory (Yes/No)

Description

progressChanged

void

Yes

Explanation:

Used to obtain the upload progress. For details, see Table 19.

Default value:

None
Table 19 progressChanged

Parameter

Type

Mandatory (Yes/No)

Description

status

ProgressStatus

Yes

Explanation:

Progress data. For details, see Table 20.

Default value:

None
Table 20 ProgressStatus

Method

Return Value Type

Description

getAverageSpeed()

double

Average transmission rate.

getInstantaneousSpeed()

double

Instantaneous transmission rate.

getTransferPercentage()

int

Transmission progress, in percentage.

getNewlyTransferredBytes()

long

Number of the newly transmitted bytes.

getTransferredBytes()

long

Number of bytes that have been transmitted.

getTotalBytes()

long

Number of the bytes to be transmitted.
Table 21 StorageClassEnum

Constant

Default Value

Description

STANDARD

STANDARD

Standard storage class

WARM

WARM

Infrequent Access storage class.

COLD

COLD

Archive storage class.

Responses

Table 22 PutObjectResult

Parameter

Type

Description

statusCode

int

Explanation:

HTTP status code.

Value range:

A status code is a group of digits that can be 2xx (indicating successes) or 4xx or 5xx (indicating errors). It indicates the status of a response.

For more information, see Status Code.

Default value:

None

responseHeaders

Map<String, Object>

Explanation:

Response header list, composed of tuples. In a tuple, the String key indicates the name of the header, and the Object value indicates the value of the header.

Default value:

None

storageClass

StorageClassEnum

Explanation:

Object storage class. If the storage class is Standard, leave this parameter blank.

Value range:

See Table 21.

Default value:

None

versionId

String

Explanation:

Object version ID. If versioning is enabled for the bucket, the object version ID will be returned.

Value range:

The value must contain 32 characters.

Default value:

None

etag

String

Explanation:

ETag of an object, which is a Base64-encoded 128-bit MD5 digest. ETag is the unique identifier of the object content. It can be used to determine whether the object content is changed. For example, if the ETag is A when an object is uploaded and is B when the object is downloaded, the object content is changed. The ETag reflects changes only to the contents of the object, not its metadata. An object created by an upload or copy operation has a unique ETag.

Restrictions:

If an object is encrypted using server-side encryption, the ETag is not the MD5 value of the object.

Value range:

The value must contain 32 characters.

Default value:

None

objectKey

String

Explanation:

Object name. An object is uniquely identified by an object name in a bucket. An object name is a complete path that does not contain the bucket name.

For example, if the address for accessing the object is examplebucket.obs.ap-southeast-1.myhuaweicloud.com/folder/test.txt, the object name is folder/test.txt.

Value range:

The value must contain 1 to 1,024 characters.

Default value:

None

bucketName

String

Explanation:

Bucket name.

Restrictions:

  • A bucket name must be unique across all accounts and regions.
  • A bucket name:
    • Must be 3 to 63 characters long and start with a digit or letter. Lowercase letters, digits, hyphens (-), and periods (.) are allowed.
    • Cannot be formatted as an IP address.
    • Cannot start or end with a hyphen (-) or period (.).
    • Cannot contain two consecutive periods (..), for example, my..bucket.
    • Cannot contain periods (.) and hyphens (-) adjacent to each other, for example, my-.bucket or my.-bucket.
  • If you repeatedly create buckets of the same name in the same region, no error will be reported and the bucket attributes comply with those set in the first creation request.

Default value:

None

Code Example 1: Uploading a Byte Array

The following code is used to upload the Hello OBS character string to the examplebucket bucket and name it objectname.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
 
import com.obs.services.ObsClient;
import com.obs.services.exception.ObsException;
import java.io.ByteArrayInputStream;
public class PutObject001 {
    public static void main(String[] args) {
        // Obtain an AK/SK pair using environment variables or import the AK/SK pair in other ways. Using hard coding may result in leakage.
        // Obtain an AK/SK pair on the management console.
        String ak = System.getenv("ACCESS_KEY_ID");
        String sk = System.getenv("SECRET_ACCESS_KEY_ID");
        // (Optional) If you are using a temporary AK/SK pair and a security token to access OBS, you are advised not to use hard coding, which may result in information leakage.
        // Obtain an AK/SK pair and a security token using environment variables or import them in other ways.
        // String securityToken = System.getenv("SECURITY_TOKEN");
        // Enter the endpoint corresponding to the bucket. CN-Hong Kong is used here as an example. Replace it with the one in your actual situation.
        String endPoint = "https://obs.ap-southeast-1.myhuaweicloud.com";
        // Obtain an endpoint using environment variables or import it in other ways.
        //String endPoint = System.getenv("ENDPOINT");
        
        // Create an ObsClient instance.
        // Use the permanent AK/SK pair to initialize the client.
        ObsClient obsClient = new ObsClient(ak, sk,endPoint);
        // Use the temporary AK/SK pair and security token to initialize the client.
        // ObsClient obsClient = new ObsClient(ak, sk, securityToken, endPoint);

        try {
            // Upload a string and convert it to a byte array.
            String content = "Hello OBS";
            obsClient.putObject("examplebucket", "objectname", new ByteArrayInputStream(content.getBytes()));
            System.out.println("putObject successfully");
        } catch (ObsException e) {
            System.out.println("putObject failed");
            // Request failed. Print the HTTP status code.
            System.out.println("HTTP Code:" + e.getResponseCode());
            // Request failed. Print the server-side error code.
            System.out.println("Error Code:" + e.getErrorCode());
            // Request failed. Print the error details.
            System.out.println("Error Message:" + e.getErrorMessage());
            // Request failed. Print the request ID.
            System.out.println("Request ID:" + e.getErrorRequestId());
            System.out.println("Host ID:" + e.getErrorHostId());
            e.printStackTrace();
        } catch (Exception e) {
            System.out.println("putObject failed");
            // Print other error information.
            e.printStackTrace();
        }
    }
}

Code Example 2: Uploading a Network Stream

The following code is used to upload the http://www.a.com network stream to the examplebucket bucket and name it objectname.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
 
import com.obs.services.ObsClient;
import com.obs.services.exception.ObsException;
import java.io.InputStream;
import java.net.URL;
public class PutObject002 {
    public static void main(String[] args) {
        // Obtain an AK/SK pair using environment variables or import the AK/SK pair in other ways. Using hard coding may result in leakage.
        // Obtain an AK/SK pair on the management console.
        String ak = System.getenv("ACCESS_KEY_ID");
        String sk = System.getenv("SECRET_ACCESS_KEY_ID");
        // (Optional) If you are using a temporary AK/SK pair and a security token to access OBS, you are advised not to use hard coding, which may result in information leakage.
        // Obtain an AK/SK pair and a security token using environment variables or import them in other ways.
        // String securityToken = System.getenv("SECURITY_TOKEN");
        // Enter the endpoint corresponding to the bucket. CN-Hong Kong is used here as an example. Replace it with the one in your actual situation.
        String endPoint = "https://obs.ap-southeast-1.myhuaweicloud.com";
        // Obtain an endpoint using environment variables or import it in other ways.
        //String endPoint = System.getenv("ENDPOINT");
        
        // Create an ObsClient instance.
        // Use the permanent AK/SK pair to initialize the client.
        ObsClient obsClient = new ObsClient(ak, sk,endPoint);
        // Use the temporary AK/SK pair and security token to initialize the client.
        // ObsClient obsClient = new ObsClient(ak, sk, securityToken, endPoint);

        try {
            // Upload a network stream.
            InputStream inputStream = new URL("http://www.a.com").openStream();
            obsClient.putObject("examplebucket", "objectname", inputStream);
            System.out.println("putObject successfully");
        } catch (ObsException e) {
            System.out.println("putObject failed");
            // Request failed. Print the HTTP status code.
            System.out.println("HTTP Code:" + e.getResponseCode());
            // Request failed. Print the server-side error code.
            System.out.println("Error Code:" + e.getErrorCode());
            // Request failed. Print the error details.
            System.out.println("Error Message:" + e.getErrorMessage());
            // Request failed. Print the request ID.
            System.out.println("Request ID:" + e.getErrorRequestId());
            System.out.println("Host ID:" + e.getErrorHostId());
            e.printStackTrace();
        } catch (Exception e) {
            System.out.println("putObject failed");
            // Print other error information.
            e.printStackTrace();
        }
    }
}

Code Example 3: Uploading a File Stream

The following code is used to upload the localfile file stream to the objectname object in the dir directory of bucketname.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
 
import com.obs.services.ObsClient;
import com.obs.services.exception.ObsException;
import com.obs.services.model.PutObjectRequest;
import java.io.File;
import java.io.FileInputStream;
public class PutObject003 {
    public static void main(String[] args) {
        // Obtain an AK/SK pair using environment variables or import the AK/SK pair in other ways. Using hard coding may result in leakage.
        // Obtain an AK/SK pair on the management console.
        String ak = System.getenv("ACCESS_KEY_ID");
        String sk = System.getenv("SECRET_ACCESS_KEY_ID");
        // (Optional) If you are using a temporary AK/SK pair and a security token to access OBS, you are advised not to use hard coding, which may result in information leakage.
        // Obtain an AK/SK pair and a security token using environment variables or import them in other ways.
        // String securityToken = System.getenv("SECURITY_TOKEN");
        // Enter the endpoint corresponding to the bucket. CN-Hong Kong is used here as an example. Replace it with the one in your actual situation.
        String endPoint = "https://obs.ap-southeast-1.myhuaweicloud.com";
        // Obtain an endpoint using environment variables or import it in other ways.
        //String endPoint = System.getenv("ENDPOINT");
        
        // Create an ObsClient instance.
        // Use the permanent AK/SK pair to initialize the client.
        ObsClient obsClient = new ObsClient(ak, sk,endPoint);
        // Use the temporary AK/SK pair and security token to initialize the client.
        // ObsClient obsClient = new ObsClient(ak, sk, securityToken, endPoint);

        try {
            // Path of the local file to be uploaded, in which the file name must be specified.
            FileInputStream fis = new FileInputStream(new File("localfile"));
            obsClient.putObject("examplebucket", "dir/objectname", fis);
            // Path of the local file to be uploaded, in which the file name must be specified.
            FileInputStream fis2 = new FileInputStream(new File("localfile2"));
            PutObjectRequest request = new PutObjectRequest();
            request.setBucketName("examplebucket");
            request.setObjectKey("objectname2");
            request.setInput(fis2);
            obsClient.putObject(request);
            System.out.println("putObject successfully");
        } catch (ObsException e) {
            System.out.println("putObject failed");
            // Request failed. Print the HTTP status code.
            System.out.println("HTTP Code:" + e.getResponseCode());
            // Request failed. Print the server-side error code.
            System.out.println("Error Code:" + e.getErrorCode());
            // Request failed. Print the error details.
            System.out.println("Error Message:" + e.getErrorMessage());
            // Request failed. Print the request ID.
            System.out.println("Request ID:" + e.getErrorRequestId());
            System.out.println("Host ID:" + e.getErrorHostId());
            e.printStackTrace();
        } catch (Exception e) {
            System.out.println("putObject failed");
            // Print other error information.
            e.printStackTrace();
        }
    }
}

Helpful Links