Help Center/ Huawei Qiankun CloudService/ More Documents/ Device Alarm Handling/ V600 Device Alarms/ Common Alarms/ ALM-135462937 hwFanRemove
Updated on 2024-01-25 GMT+08:00
View PDF
Share

ALM-135462937 hwFanRemove

Description

The fan module was removed. (EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=[EntityTrapFaultID], EntityOperStatus=[EntityOperStatus], Reason=[ReasonDsp])

A fan was removed.

Attribute

Alarm ID

OID

Alarm Severity

Alarm Type

135462937

1.3.6.1.4.1.2011.5.25.219.2.6.1

Major

Equipment alarm

Parameters

Name Meaning

EntPhysicalIndex

Indicates the entity index.

EntPhysicalName

Indicates the name of an entity.

EntityTrapFaultID

Indicates the error code.

EntityOperStatus

Indicates the Status.

ReasonDsp

Indicates a possible cause.

Impact on the System

A fault of the fan module affects heat dissipation performance of the device and increases the temperature of the device. Services are not affected in a short time, but the fault should be rectified quickly.

Possible Causes

A fan module was removed.

Procedure

  1. Check whether the fan is installed.
    • If so, go to step 2.
    • If not, install the fan correctly.
  2. Check whether the fan is installed properly.
    • If so, replace the fan.
    • If not, install the fan correctly.

Clearing

After the fault is rectified, the system clears this alarm, removing the need to manually clear it. This alarm will not be displayed on the CurrentAlarms page.

Parent topic: Common Alarms