El contenido no se encuentra disponible en el idioma seleccionado. Estamos trabajando continuamente para agregar más idiomas. Gracias por su apoyo.
- What's New
- Function Overview
- Product Bulletin
- Service Overview
- Billing
- Getting Started
- User Guide
-
Best Practices
- Direct Connect Best Practices
- Connecting an On-Premises Data Center to a VPC over a Single Connection and Using Static Routing to Route Traffic
- Connecting an On-Premises Data Center to a VPC over a Single Connection and Using BGP Routing to Route Traffic
- Connecting an On-Premises Data Center to a VPC over Two Connections in Load Balancing Mode (Virtual Gateway)
- Connecting an On-Premises Data Center to a VPC over Two Connections in an Active/Standby Pair (Virtual Gateway)
- Connecting an On-Premises Data Center to Multiple VPCs that Do Not Need to Communicate with Each Other
- Connecting an On-Premises Data Center to Multiple VPCs in the Same Region Using Direct Connect and VPC Peering
- Using a Public NAT Gateway and Direct Connect to Accelerate Internet Access
- Allowing On-Premises Servers to Access Cloud Services Using Direct Connect and VPC Endpoint
-
API Reference
- Before You Start
- API Overview
- Calling APIs
-
API
- Connections
- Virtual Gateways
-
Virtual Interfaces
- Creating a Virtual Interface
- Querying the Virtual Interface List
- Querying Details About a Virtual Interface
- Updating a Virtual Interface
- Deleting a Virtual Interface
- Creating a Virtual Interface Peer
- Updating a Virtual Interface Peer
- Deleting a Virtual Interface Peer
- Performing a Virtual Interface Switchover Test
- Querying the List of Virtual Interface Switchover Test Records
- Tag Management
- Quota Management
- Global DC Gateways
- Peer Links
- Connect Gateways
- Global EIPs
- Global DC Gateway Route Tables
- Public Parameters
- Appendix
- SDK Reference
- Troubleshooting
-
FAQs
-
Popular Questions
- What Are the Network Requirements for Connections?
- What Locations Are Available for Direct Connect?
- How Do I Select a Carrier When Purchasing a Connection?
- How Will I Be Billed for Direct Connect?
- How Do I Submit a Service Ticket?
- How Do I Test the Network Connectivity Between a Location and the Cloud?
- What Do I Do If I Select the Wrong Carrier When Creating a Connection?
-
Product Consultation
- What Are the Network Requirements for Connections?
- What Are 1GE and 10GE?
- What Locations Are Available for Direct Connect?
- Is BGP Routing Supported in Direct Connect?
- What Is Full-Service Installation Statement?
- How Do I Submit a Service Ticket?
- What Are the Network Latency and Packet Loss Rate of a Connection?
- Are the Uplink and Downlink Bandwidths of a Direct Connect Connection the Same?
- What Do I Do If I Select the Wrong Carrier When Creating a Connection?
- How Do I Plan the VPCs for a New Connection?
- What Are Local and Remote Gateways (Interconnection IP Addresses)?
- How Do I Configure BFD for a Connection?
- Leased Line
-
Interconnection with the Cloud
- Can I Access the Same VPC over Multiple Connections?
- How Do I Plan the CIDR Blocks for a Connection?
- What Should I Consider When I Use Direct Connect to Access the Cloud?
- Does Direct Connect Support NAT?
- Can the VLAN of the On-premises Network Be Used in the VPC Through Direct Connect?
- Can My On-Premises Data Center Access Multiple VPCs Through One Connection?
- Can Direct Connect Be Used with Similar Services of Other Cloud Service Providers?
-
Networking and Scenarios
- Can Multiple Connections Access the Same VPC?
- Can My On-Premises Data Center Access Multiple VPCs Through One Connection?
- Can Direct Connect Be Used with Similar Services of Other Cloud Service Providers?
- Can I Limit the Bandwidth Available on Each Hosted Connection?
- How Do I Plan the VPCs for a New Connection?
-
Related Console Operations
- How Do I Submit a Service Ticket?
- How Can I Unsubscribe from Direct Connect?
- What Parameters Can Be Modified After I Have Created a Virtual Interface?
- Do I Need to Delete the Virtual Gateway and Virtual Interface Before Deleting a Hosted Connection?
- How Do I Change the Routing Mode of a Connection?
- How Do I Delete a Hosted Connection?
- What Is the BGP ASN Used by Huawei Cloud?
- What Are Local and Remote Gateways (Interconnection IP Addresses)?
- Troubleshooting
- Billing
- Resource Monitoring
- Quota
-
Popular Questions
-
More Documents
- User Guide (ME-Abu Dhabi Region)
- User Guide (Paris Region)
- eu-west-0-api
- User Guide (Kuala Lumpur Region)
-
API Reference (Kuala Lumpur Region)
- Before You Start
- API Overview
- Calling APIs
- API Usage
-
API
- Connection
- Virtual Gateway
-
Virtual Interface
- Querying Details About a Virtual Interface
- Updating a Virtual Interface
- Deleting a Virtual Interface
- Querying the Virtual Interface List
- Creating a Virtual Interface
- Updating a Virtual Interface Peer
- Deleting a Virtual Interface Peer
- Creating a Virtual Interface Peer
- Performing a Virtual Interface Switchover Test
- Querying the Switchover Test Records of a Virtual Interface
- Tag management
- Quota Management
- Public Parameters
- Appendixes
- Change History
- General Reference
Copied.
Updating a Hosted Connection
Function
Updating a hosted connection by a partner
URI
PUT /v3/{project_id}/dcaas/hosted-connects/{hosted_connect_id}
Parameter |
Mandatory |
Type |
Description |
---|---|---|---|
project_id |
Yes |
String |
Specifies the project ID. |
hosted_connect_id |
Yes |
String |
Specifies the hosted connection ID. Minimum: 36 Maximum: 36 |
Request Parameters
Parameter |
Mandatory |
Type |
Description |
---|---|---|---|
X-Auth-Token |
Yes |
String |
Specifies the user token. To obtain the token, see section "Obtaining the User Token" in the Identity and Access Management API Reference. The token is the value of X-Subject-Token in the response header. Minimum: 0 Maximum: 10240 |
Parameter |
Mandatory |
Type |
Description |
---|---|---|---|
hosted_connect |
No |
UpdateHostedDirectConnect object |
Specifies parameters required for updating a hosted connection. |
Parameter |
Mandatory |
Type |
Description |
---|---|---|---|
name |
No |
String |
Specifies the connection name. Minimum: 0 Maximum: 64 |
description |
No |
String |
Provides supplementary information about the connection. Minimum: 0 Maximum: 128 |
bandwidth |
No |
Integer |
Specifies the bandwidth size of the hosted connection in Mbit/s. Minimum: 2 Maximum: 400000 |
peer_location |
No |
String |
Specifies the location of the on-premises facility at the other end of the connection, specific to the street or data center name. Minimum: 0 Maximum: 255 |
Response Parameters
Status code: 200
Parameter |
Type |
Description |
---|---|---|
request_id |
String |
Specifies the request ID. |
hosted_connect |
HostedDirectConnect object |
Specifies the parameters for creating a hosted connection. |
Parameter |
Type |
Description |
---|---|---|
id |
String |
Specifies the hosted connection ID. Minimum: 36 Maximum: 36 |
tenant_id |
String |
Specifies the ID of the project that the instance belongs to. |
name |
String |
Specifies the connection name. Minimum: 0 Maximum: 64 |
description |
String |
Provides supplementary information about the connection. Minimum: 0 Maximum: 128 |
bandwidth |
Integer |
Specifies the connection bandwidth in Mbit/s. Minimum: 2 Maximum: 400000 |
location |
String |
Specifies information about the Direct Connect location. Minimum: 0 Maximum: 255 |
peer_location |
String |
Specifies the location of the on-premises facility at the other end of the connection, specific to the street or data center name. Minimum: 0 Maximum: 255 |
hosting_id |
String |
Specifies the ID of the operations connection on which the hosted connection is created. |
provider |
String |
Specifies the provider of the leased line. |
admin_state_up |
Boolean |
Specifies the administrative status, which can be true or false. Default: true |
vlan |
Integer |
Specifies the VLAN allocated to the hosted connection. Minimum: 0 Maximum: 3999 |
status |
String |
Specifies the operating status of the hosted connection. The options are as follows:
Enumeration values:
|
apply_time |
String |
Specifies when the connection was requested. The UTC time format yyyy-MM-ddTHH:mm:ss.SSSZ is used. |
create_time |
String |
Specifies when the connection was created. The UTC time format yyyy-MM-ddTHH:mm:ss.SSSZ is used. |
provider_status |
String |
Specifies the status of the carrier's leased line. The status can be ACTIVE or DOWN. Enumeration values:
|
port_type |
String |
Specifies the type of the port used by the connection. The value can be 1G, 10G, 40G, or 100G. Enumeration values:
|
type |
String |
Specifies the type of a connection. The value can be standard (a standard connection), hosting (an operations connection) or hosted (a hosted connection). Default: standard Enumeration values:
|
Example Requests
Updating the name and description of a hosted connection
PUT https://{dc_endpoint}/v3/6fbe9263116a4b68818cf1edce16bc4f/dcaas/hosted-connects/0278b472-ffa5-4eb3-8c0d-979d479f8ef6 { "hosted_connect" : { "name" : "client-dc-faf1", "description" : "" } }
Example Responses
Status code: 200
OK
Status Codes
Status Code |
Description |
---|---|
200 |
OK |
Error Codes
See Error Codes.
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot