Help Center > > User Guide> MRS Manager Operation Guide> Alarm Reference (Applicable to MRS 2.x or Earlier)> ALM-12052 Usage of Temporary TCP Ports Exceeds the Threshold

ALM-12052 Usage of Temporary TCP Ports Exceeds the Threshold

Updated at: Mar 25, 2021 GMT+08:00

Description

The system checks the usage of temporary TCP ports every 30 seconds. This alarm is generated when the usage of temporary TCP ports exceeds the threshold (the default threshold is 80%) for multiple times (the default value is 5).

You can change the threshold by choosing System > Threshold Configuration > Host > Network Status > TCP Ephemeral Port Usage > TCP Ephemeral Port Usage.

If the hit number is 1, this alarm is cleared when the usage of temporary TCP ports is less than or equal to the threshold. If the hit number is greater than 1, this alarm is cleared when the usage of temporary TCP ports is less than or equal to 90% of the threshold.

Attribute

Alarm ID

Alarm Severity

Auto Clear

12052

Major

Yes

Parameters

Parameter

Description

ServiceName

Specifies the service for which the alarm is generated.

RoleName

Specifies the role for which the alarm is generated.

HostName

Specifies the host for which the alarm is generated.

Trigger Condition

Specifies the threshold for triggering the alarm.

Impact on the System

Services on the host fail to establish connections with the external and services are interrupted.

Possible Causes

  • The temporary ports do not meet service requirements.
  • The system is abnormal.

Procedure

Expand the range of temporary ports.

  1. Go to the MRS cluster details page and choose Alarms.
  2. In the real-time alarm list, click the alarm. In the Alarm Details area, obtain the IP address of the host for which the alarm is generated.
  3. Use PuTTY to log in to the host for which the alarm is generated as user omm.
  4. Run the cat /proc/sys/net/ipv4/ip_local_port_range |cut -f 1 command to obtain the start port number. Run the cat /proc/sys/net/ipv4/ip_local_port_range |cut -f 2 command to obtain the end port number. Subtract the start port number from the end port number to obtain the total number of temporary ports. If the total number of temporary ports is less than 28,232, the random port range of the OS is too small. In this case, contact the system administrator to expand the port range.
  5. Run the ss -ant 2>/dev/null | grep -v LISTEN | awk 'NR > 2 {print $4}'|cut -d ':' -f 2 | awk '$1 >"start port number" {print $1}' | sort -u | wc -l command to calculate the number of used temporary ports.
  6. Calculate the usage of temporary ports using the following formula: Usage of temporary ports = (Number of used temporary ports/Total number of temporary ports) x 100. Check whether the usage exceeds the threshold.

    • If yes, go to 8.
    • If no, go to 7.

  7. Wait 5 minutes and check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 8.

Check whether the system environment is normal.

  1. Run the following command to import the temporary file and view the frequently used ports in the port_result.txt file:

    netstat -tnp > $BIGDATA_HOME/tmp/port_result.txt

    netstat -tnp 
    
    Active Internet connections (w/o servers)
    
    Proto Recv Send LocalAddress ForeignAddress State PID/ProgramName tcp   0   0 10-120-85-154:45433  10-120-8:25009 CLOSE_WAIT 94237/java 
    tcp   0   0 10-120-85-154:45434  10-120-8:25009 CLOSE_WAIT 94237/java 
    tcp   0   0 10-120-85-154:45435  10-120-8:25009 CLOSE_WAIT 94237/java 
    ...

  2. Run the following command to check the processes that occupy a large number of ports:

    ps -ef |grep PID

    • PID indicates the process ID of the port queried in 8.
    • Run the following command to collect information about all processes in the system and check the processes that occupy a large number of ports:

      ps -ef > $BIGDATA_HOME/tmp/ps_result.txt

  3. Contact the system administrator to clear the processes that occupy a large number of ports. Wait 5 minutes and check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 11.

  4. Collect fault information.

    1. On MRS Manager, choose System > Export Log.
    2. Contact the O&M personnel and send the collected logs.

Reference

None

Did you find this page helpful?

Submit successfully!

Thank you for your feedback. Your feedback helps make our documentation better.

Failed to submit the feedback. Please try again later.

Which of the following issues have you encountered?







Please complete at least one feedback item.

Content most length 200 character

Content is empty.

OK Cancel