Help Center > > User Guide> FusionInsight Manager Operation Guide (Applicable to 3.x)> Alarm Reference (Applicable to MRS 3.x)> ALM-18000 Yarn Service Unavailable

ALM-18000 Yarn Service Unavailable

Updated at: Mar 25, 2021 GMT+08:00

Description

This alarm is generated when the Yarn service is unavailable. The alarm module checks the Yarn service status every 60 seconds.

The alarm is cleared when the Yarn service recovers.

Attribute

Alarm ID

Alarm Severity

Automatically Cleared

18000

Critical

Yes

Parameters

Name

Meaning

Source

Specifies the cluster for which the alarm is generated.

ServiceNam

Specifies the service for which the alarm is generated.

RoleName

Specifies the role for which the alarm is generated.

HostName

Specifies the host for which the alarm is generated.

Impact on the System

The cluster cannot provide Yarn services. Users cannot run new applications. Submitted applications cannot be run.

Possible Causes

  • The ZooKeeper service is abnormal.
  • The HDFS service is abnormal.
  • There is no active ResourceManager instance in the Yarn cluster.
  • All the NodeManagers in the Yarn cluster are abnormal.

Procedure

Check ZooKeeper service status.

  1. On the FusionInsight Manager, check whether the alarm list contains ALM-13000 ZooKeeper Service Unavailable.

    • If yes, go to 2.
    • If no, go to 3.

  2. Rectify the fault by following the steps provided in ALM-13000 ZooKeeper Service Unavailable, and check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 3.

Check the HDFS service status.

  1. On the FusionInsight Manager, check whether the alarm list contains the HDFS alarms.

    • If yes, go to 4.
    • If no, go to 5.

  2. Choose O&M > Alarm > Alarms, handle HDFS alarms based on the alarm help, and check whether the Yarn alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 5.

Check the ResourceManager status in the Yarn cluster.

  1. On the FusionInsight Manager portal, choose Cluster > Name of the desired cluster > Services > Yarn.
  2. In Dashboard, check whether there is an active ResourceManager instance in the Yarn cluster.

    • If yes, go to 7.
    • If no, go to 10.

Check the NodeManager node status in the Yarn cluster.

  1. On the FusionInsight Manager portal, choose Cluster > Name of the desired cluster > Services > Yarn > Instance.
  2. Query NodeManager Running Status, and check whether there are unhealthy nodes.

    • If yes, go to 9.
    • If no, go to 10.

  3. Rectify the fault by following the steps provided in ALM-18002 NodeManager Heartbeat Lost or ALM-18003 NodeManager Unhealthy. After the fault is rectified, check whether the Yarn alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 10.

Collect fault information.

  1. On the FusionInsight Manager portal of the active cluster, choose O&M > Log > Download.
  2. Select Yarn in the required cluster from the Service.
  3. Click in the upper right corner, and set Start Date and End Date for log collection to 10 minutes ahead of and after the alarm generation time, respectively. Then, click Download.
  4. Contact the O&M personnel and send the collected logs.

Alarm Clearing

After the fault is rectified, the system automatically clears this alarm.

Related Information

None

Did you find this page helpful?

Submit successfully!

Thank you for your feedback. Your feedback helps make our documentation better.

Failed to submit the feedback. Please try again later.

Which of the following issues have you encountered?







Please complete at least one feedback item.

Content most length 200 character

Content is empty.

OK Cancel