Help Center > > User Guide> FusionInsight Manager Operation Guide> Alarm Reference (Applicable to MRS 3.x)> ALM-12081User ommdba Expired

ALM-12081 User ommdba Expired

Updated at: Mar 25, 2021 GMT+08:00

Description

The system starts at 00:00 every day to check whether user ommdba has expired every 8 hours. This alarm is generated if the user account has expired.

This alarm is cleared when the expiration time of user ommdba is reset and the user account status becomes normal.

Attribute

Alarm ID

Alarm Severity

Auto Clear

12081

Major

Yes

Parameters

Name

Meaning

Source

Specifies the cluster or system for which the alarm is generated.

ServiceName

Specifies the service for which the alarm is generated.

RoleName

Specifies the role for which the alarm is generated.

HostName

Specifies the host for which the alarm is generated.

Impact on the System

The OMS database cannot be managed and data cannot be accessed.

Possible Causes

The account of user ommdba for the host has expired.

Procedure

Check whether user ommdba has expired.

  1. Log in to the faulty node as user root.

    Run the chage -l ommdba command to view the information about the password of user ommdba.

  2. View the value of Account expires to check whether the user configurations have expired.

    If the parameter value is never, the user and password are valid permanently; if the value is a date, check whether the user and password have expired.

    • If they do, go to 3.
    • If they do not, go to 4.

  3. Run the chage -E 'yyyy-MM-dd' omm command to set the validity period of user ommdba. Eight hours later, check whether the alarm is automatically cleared.

    • If it is, no further action is required.
    • If it is not, go to 4.

Collect fault information.

  1. On FusionInsight Manager, choose O&M > Log > Download.
  2. Select NodeAgent for Service and click OK.
  3. Click in the upper right corner. In the displayed dialog box, set Start Date and End Date to 10 minutes before and after the alarm generation time respectively and click OK. Then, click Download.
  4. Contact the O&M personnel and send the collected log information.

Alarm Clearing

This alarm will be automatically cleared after the fault is rectified.

Related Information

None

Did you find this page helpful?

Submit successfully!

Thank you for your feedback. Your feedback helps make our documentation better.

Failed to submit the feedback. Please try again later.

Which of the following issues have you encountered?







Please complete at least one feedback item.

Content most length 200 character

Content is empty.

OK Cancel