Help Center/ Virtual Private Network/ User Guide (Ankara Region)/ Management/ Enterprise Edition VPN Gateway Management/ Creating a VPN Gateway
Updated on 2024-12-20 GMT+08:00
View PDF
Share

Creating a VPN Gateway

Scenario

To connect your on-premises data center or private network to your ECSs in a VPC, you need to create a VPN gateway before creating a VPN connection.

Context

The recommended networking varies according to the number of customer gateway IP addresses, as described in Table 1.
Table 1 Networking

Number of Customer Gateway IP Addresses

Recommended Networking

Description

1

It is recommended that the VPN gateway uses the active-active mode. In this case, one VPN connection group is used.

2

It is recommended that the VPN gateway uses the active/standby mode. In this case, two VPN connection groups are used.
  • If your on-premises data center has only one customer gateway configured with only one IP address, it is recommended that the VPN gateway uses the active-active mode. In this mode, you need to create a VPN connection between each of the active EIP and active EIP 2 of the VPN gateway and the IP address of the customer gateway. In this scenario, only one VPN connection group is used.
  • If your on-premises data center has two customer gateways or one customer gateway configured with two IP addresses, it is recommended that the VPN gateway uses the active/standby mode. In this mode, you need to create a VPN connection with each of the customer gateway IP addresses using the active and standby EIPs of the VPN gateway. In this scenario, two VPN connection groups are used.

Notes and Constraints

  • A VPN gateway of a non-GM specification cannot be changed to a VPN gateway of the GM specification.

Prerequisites

  • A VPC has been created. For details about how to create a VPC, see the Virtual Private Cloud User Guide.
  • Security group rules have been configured for the VPC, and ECSs can communicate with other devices on the cloud. For details about how to configure security group rules, see the Virtual Private Cloud User Guide.

Procedure

  1. Log in to the management console.
  2. Click in the upper left corner and select the desired region and project.
  3. Click in the upper left corner of the page, and choose Networking > Virtual Private Network.
  4. In the navigation pane on the left, choose Virtual Private Network > Enterprise – VPN Gateways.
  5. Click Create VPN Gateway.
  6. Set parameters as prompted and click Next.

    Table 2 lists the VPN gateway parameters.

    Table 2 Description of VPN gateway parameters

    Parameter

    Description

    Example Value

    Region

    For low network latency and fast resource access, select the region nearest to your target users.

    Resources cannot be shared across regions.

    Select a region as required.

    AZ

    An AZ is a geographic location with independent power supply and network facilities in a region. AZs in the same VPC are interconnected through private networks and are physically isolated. You are advised to select an AZ type based on the AZs where resources in the VPC are located. The following types of AZs are supported:

    • General
    • HomeZones

    Set this parameter based on the site requirements.

    Name

    Name of a VPN gateway. The value can contain only letters, digits, underscores (_), hyphens (-), and periods (.).

    vpngw-001

    Network Type
    • Public network: A VPN gateway establishes VPN connections through the Internet.
    • Private network: A VPN gateway establishes VPN connections through a private network.

    Public network

    Protocol Type

    The value can be IPv4 or IPv6.

    IPv4

    Associate With
    • VPC

      Through a VPC, the VPN gateway sends messages to the customer gateway or servers in the local subnet.

    VPC

    VPC

    Select a VPC.

    vpc-001(192.168.0.0/16)

    Interconnection Subnet

    This subnet is used for communication between the VPN gateway and VPC. Ensure that the selected interconnection subnet has four or more assignable IP addresses.

    192.168.66.0/24

    Local Subnet

    Specify the VPC subnets with which your on-premises data center needs to communicate through the customer gateway.

    • Select subnet

      Select subnets of the local VPC.

    • Enter CIDR block

      Enter subnets of the local VPC or subnets of the VPC that establishes a peering connection with the local VPC.

    192.168.1.0/24,192.168.2.0/24

    BGP ASN

    BGP ASN of the VPN gateway, which must be different from that of the customer gateway.

    64512

    HA Mode
    • Active-active
      • When Associate With is set to VPC, the outgoing traffic from the VPN gateway to the customer subnet is preferentially forwarded through the first VPN connection (VPN connection 1) set up between the customer subnet and an EIP. If VPN connection 1 fails, the outgoing traffic is automatically switched to the other VPN connection (VPN connection 2) set up with the customer subnet. After VPN connection 1 recovers, the outgoing traffic is still transmitted through VPN connection 2 and will not be switched back to VPN connection 1.
    • Active/Standby

      The outgoing traffic from the VPN gateway to the customer subnet is preferentially transmitted through the VPN connection (VPN connection 1) set up between the customer subnet and the active EIP. If VPN connection 1 fails, the outgoing traffic is automatically switched to the other VPN connection (VPN connection 2) set up between the customer subnet and the standby EIP. After VPN connection 1 recovers, the outgoing traffic is automatically switched back to VPN connection 1.

    Active-active

    Specification

    Three options are available: Professional 1, Professional 2, and GM.

    Professional 1

    Shared Bandwidth
    • When Billing Mode is set to Pay-per-use, the shared bandwidth is disabled by default.

    Disabled

    HomeZones

    This parameter is available only when EIP Type is set to HomeZones.

    Set this parameter based on the site requirements.

    Bandwidth Name

    Specify the name of the EIP bandwidth.

    Vpngw-bandwidth2

    Active EIP

    EIP used by the VPN gateway to communicate with a customer gateway.

    • Create now: Create an EIP.
    • Use existing: Use an existing EIP. This EIP can share bandwidth with the EIPs of other network services.

    Create Now

    Bandwidth (Mbit/s)

    Bandwidth of the EIP, in Mbit/s.

    • All VPN connections created using the EIP share the bandwidth of the EIP. The total bandwidth consumed by all the VPN connections cannot exceed the bandwidth of the EIP.

      If network traffic exceeds the bandwidth of the EIP, network congestion may occur and VPN connections may be interrupted. As such, ensure that you configure enough bandwidth.

    • You can configure alarm rules on Cloud Eye to monitor the bandwidth.
    • You can customize the bandwidth within the allowed range.

    10 Mbit/s

    Active EIP 2

    A VPN gateway needs to be bound to a group of EIPs (active EIP and active EIP 2). You can plan the bandwidth for each EIP. The EIPs can share bandwidth with the EIPs of other network services.

    Create Now

    Standby EIP

    A VPN gateway needs to be bound to a group of EIPs (active EIP and standby EIP). You can plan the bandwidth for each EIP. The EIPs can share bandwidth with the EIPs of other network services.

    Create Now

    Enterprise Project

    Enterprise project to which the VPN belongs.

    An enterprise project facilitates project-level management and grouping of cloud resources and users. The default project is default.

    default

    Access VPC
    • This parameter is available only when Associate With is set to VPC and Network Type is set to Private network.

    If a VPN gateway needs to connect to different VPCs in the southbound and northbound directions, set the VPC in the northbound direction as the access VPC. The VPC in the southbound direction is the VPC associated with the VPN gateway.

    Same as the associated VPC

    Access Subnet
    • This parameter is available only when Associate With is set to VPC and Network Type is set to Private network.

    By default, a VPN gateway uses the interconnection subnet to connect to the associated VPC. Set this parameter when another subnet needs to be used.

    Same as the interconnection subnet

  7. Confirm the VPN gateway information and click Submit.
  8. (Optional) For a VPN gateway of the GM specification, upload the VPN gateway certificate after the VPN gateway is created. Otherwise, the VPN gateway cannot set up a VPN connection.

    For details, see Uploading Certificates for a VPN Gateway.