Help Center> Virtual Private Network> Getting Started> Configuring Enterprise Edition P2C VPN to Connect Mobile Terminals to a VPC (FUT)> Step 2: Configuring a Server
Updated on 2024-05-07 GMT+08:00
View PDF

Step 2: Configuring a Server

Prerequisites

  • The server certificate has been hosted by the CCM.
  • You have obtained the client CA certificate.

Procedure

  1. On the P2C VPN Gateways page, locate the target VPN gateway and click Configure Server in the Operation column.
  2. Set parameters as prompted and click OK.
    Table 1 Server parameters

    Area

    Parameter

    Description

    Example Value

    Basic Information

    Local CIDR Block

    Specify the destination CIDR block that clients need to access.

    You can select a subnet or enter a CIDR block.

    192.168.1.0/24

    Client CIDR Block

    Specify the CIDR block for assigning addresses to virtual NICs of client.

    172.16.0.0/16

    Authentication Information

    Server Certificate

    Select a server certificate.

    cert-scsxxxxxxxxxxxxx

    Client CA Certificate

    Click Upload to upload a client CA certificate.

    If there are multi-level CA certificates, upload all CA certificates in the certificate chain.

    ca-cert-xxxx

    Advanced Settings

    Protocol

    Use the default value.

    UDP

    Port

    Use the default value.

    443

    Encryption Algorithm

    Use the default value.

    AES-128-GCM