Help Center/ Huawei Qiankun CloudService/ More Documents/ Device Alarm Handling/ V200 LSW Alarms/ ALM-3276800030 The number of VAP instances has exceeded the maximum
Updated on 2024-01-25 GMT+08:00

ALM-3276800030 The number of VAP instances has exceeded the maximum

Description

WLAN/2/VAP_NUM_EXCEEDED: OID [OID] The number of VAP instances has exceeded the maximum. (Vap = [INTEGER])

The number of VAP instances exceeds the maximum specifications of the system.

Attribute

Alarm ID

Alarm Severity

Alarm Type

3276800030

Major

Equipment alarm

Parameters

Name

Meaning

OID

Indicates the MIB object of the alarm.

Vap

Indicates the maximum number of VAPs.

Impact on the System

VAPs that exceed the specifications cannot be created.

Possible Causes

The number of VAP instances reaches the maximum specifications of the system.

Procedure

  1. Run the display vap all command to view all VAPs on the device.
  2. Run the display ap by-ssid ssid command to view information about an AP group with a specified SSID.
  3. Run the ap-group name group-name command to enter the AP group view.
  4. Run the undo vap-profile profile-name wlan wlan-id { radio { radio-id | all } } command to delete one or more VAPs that are not needed.

    • If the alarm persists, go to Step 5.
    • If the alarm is cleared, go to Step 6.

  5. Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
  6. End.

Related Information

None