Updated on 2024-01-25 GMT+08:00

ALM-223617026 hwMstpProRootLost

Description

The bridge loses the position of root bridge.(ProcessID=[ProcessID], InstanceID=[InstanceID], ProInstRootType=[ProInstRootType])

A device lost its root bridge role.

Attribute

AlarmID

Alarm OID

Alarm Severity

Alarm Type

223617026

1.3.6.1.4.1.2011.5.25.42.4.2.28

Major

Communication alarm

Parameters

Name

Meaning

ProcessID

MSTP process ID

InstanceID

Instance ID

ProInstRootType

Root bridge role type

Impact on the System

Services may be interrupted.

Possible Causes

  • Cause 1: The bridge ID of new equipment is not optimal.
  • Cause 2: Modify thr priority or domain configuration of the device in the original network.

Procedure

  • Cause 1: The bridge ID of new equipment is not optimal.
    1. Check whether the added physical link is the required one.
      • If the physical link is required, go to Step 2.
      • If the physical link is not required, go to Step 3.
    2. Run the display stp [ process process-id ] [ instance instance-id ] [ interface interface-type interface-number | slot slot-id | vsi vsi-name pw pw-name ] [ brief ] command on the newly added device to check whether the bridge ID is optimal on the entire network.
      • If the bridge ID is optimal on the entire network, go to Step 3.
      • If the bridge ID is not optimal on the entire network, go to Step 5.
    3. Check whether the bridge ID of the newly added device should be planned as the optimal ID on the entire network.
      • If the bridge ID should be planned as the optimal one on the entire network, no action is required.
      • If the bridge ID should not be planned as the optimal one on the entire network, go to Step 4.
    4. Perform configuration correctly based on the network topology and check whether the alarm is cleared. If the alarm persists, go to Step 5.
    5. Collect alarm and configuration information, and contact technical support personnel.
  • Cause 2: Modify thr priority or domain configuration of the device in the original network.
    1. Run the display stp [ process process-id ] [ instance instance-id ] [ interface interface-type interface-number | slot slot-id | vsi vsi-name pw pw-name ] [ brief ] command to check whether the instance's priority vector or region configuration change is normal.
      • If yes, no action is required.
      • If not, go to Step 2.
    2. Perform configuration correctly based on the network topology. If the alarm persists, go to Step 3.
    3. Collect alarm information and configuration information, and then contact technical support personnel.

Related Information

None.