ALM-135462976 hwBoardRemove
Description
The board was removed. (EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityType=[EntityType], EntityTrapFaultID=[EntityTrapFaultID], Reason=[Reason])
A card is removed from the device.
Attribute
Alarm ID |
OID |
Alarm Severity |
Alarm Type |
---|---|---|---|
135462976 |
1.3.6.1.4.1.2011.5.25.219.2.2.1 |
Warning |
Equipment alarm |
Parameters
Parameter |
Description |
---|---|
EntPhysicalIndex |
Entity index. |
EntPhysicalName |
Entity name. |
EntityType |
Entity type. |
EntityTrapFaultID |
Alarm cause. |
Reason |
Impact on the System
All services on the board are interrupted, and the reliability of control data transmission between devices is affected.
Possible Causes
A board was removed.
Procedure
- Check whether the board is removed manually.
- If so, go to step 2.
- If not, go to step 3.
- Re-insert the board. After the board is started successfully, run the display device command to check whether the board is registered successfully.
- If the registration is successful, the fault is rectified.
- If the registration fails, go to step 3.
- Collect alarm, log, and configuration information, and contact technical support personnel.
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot