Meta-Command Reference
This section describes meta-commands provided by gsql after the GaussDB(DWS) database CLI tool is used to connect to a database. A gsql meta-command can be anything that you enter in gsql and begins with an unquoted backslash.
Precautions
- The format of the gsql meta-command is a backslash (\) followed by a command verb, and then a parameter. The parameters are separated from the command verb and from each other by any number of whitespace characters.
- To include whitespace in a parameter, you can quote it with single quotation marks (''). To include single quotation marks in a parameter, add a backslash in front of it. Anything contained in single quotation marks is furthermore subject to C-like substitutions for \n (new line), \t (tab), \b (backspace), \r (carriage return), \f (form feed), \digits (octal), and \xdigits (hexadecimal).
- Within a parameter, text enclosed in double quotation marks ("") is taken as a command line input to the shell. The command output (with any trailing newline removed) is taken as a parameter.
- If an unquoted argument begins with a colon (:), the parameter is taken as a gsql variable and the value of the variable is used as the parameter value instead.
- Some commands take a SQL identifier, such as a table name, as a parameter. These parameters follow the SQL syntax rules: Unquoted letters are forced to lowercase, while double quotation marks ("") protect letters from case conversion and allow incorporation of whitespace into the identifier. Within double quotation marks, paired double quotation marks reduce to a single double quotation mark in the result name. For example, FOO"BAR"BAZ is interpreted as fooBARbaz, and "Aweird""name" becomes A weird"name.
- Parameter parsing stops when another unquoted backslash appears. An unquoted backslash is taken as the beginning of a new meta-command. The special sequence \\ (two backslashes) marks the end of parameters and continues parsing SQL statements if any. In this way, SQL statements and gsql commands can be freely mixed in a row. However, the parameters of a meta-command cannot continue beyond the end of a line in any situations.
Meta-command
For details about meta-commands, see Table 1, Table 2, Table 3, Table 4, Table 6, Table 8, Table 9, Table 10, and Table 12.
FILE mentioned in the following commands indicates a file path. This path can be an absolute path such as /home/gauss/file.txt or a relative path, such as file.txt. By default, a file.txt is created in the path where the user runs gsql commands.
Parameter |
Description |
Value Range |
|---|---|---|
\copyright |
Displays GaussDB(DWS) version and copyright information. |
- |
\g [FILE] or ; |
Performs a query operation and sends the result to a file or pipe. |
- |
\h(\help) [NAME] |
Provides syntax help on the specified SQL statement. |
If the name is not specified, then gsql will list all the commands for which syntax help is available. If the name is an asterisk (*), the syntax help on all SQL statements is displayed. |
\parallel [on [num]|off] |
Controls the parallel execution function.
NOTE:
|
The default value of num is 1024.
NOTICE:
|
\q [value] |
Exits the gsql program. In a script file, this command is run only when a script terminates. The exit code is determined by the value. |
- |
Parameter |
Description |
|---|---|
\e [FILE] [LINE] |
Use an external editor to edit the query buffer or file. |
\ef [FUNCNAME [LINE]] |
Use an external editor to edit the function definition. If LINE is specified, the cursor will point to the specified line of the function body. |
\p |
Prints the current query buffer to the standard output. |
\r |
Resets (clears) the query buffer. |
\w FILE |
Outputs the current query buffer to a file. |
Parameter |
Description |
|---|---|
\copy { table [ ( column_list ) ] | ( query ) } { from | to } { filename | stdin | stdout | pstdin | pstdout } [ with ] [ binary ] [ oids ] [ delimiter [ as ] 'character' ] [ null [ as ] 'string' ] [ csv [ header ] [ quote [ as ] 'character' ] [ escape [ as ] 'character' ] [ force quote column_list | * ] [ force not null column_list ] ] |
After logging in to the database on any psql client, you can import and export data. This is an operation of running the SQL COPY command, but not the server that reads or writes data to a specified file. Instead, data is transferred between the server and the local file system. This means that the accessibility and permissions of the file are the permissions of the local user rather than the server. The initial database user permission is not required.
NOTE:
\copy only applies to small-batch data import with uniform formats but poor error tolerance capability. GDS or COPY is preferred for data import. |
\echo [STRING] |
Writes a character string to the standard output. |
\i FILE |
Reads content from FILE and uses them as the input for a query. |
\i+ FILE KEY |
Runs commands in an encrypted file. |
\ir FILE |
Is similar to \i, but resolves relative path names differently. |
\ir+ FILE KEY |
Is similar to \i, but resolves relative path names differently. |
\o [FILE] |
Saves all query results to a file. |
\qecho [STRING] |
Prints a character string to the query result output. |
Parameter |
Description |
Value Range |
Example |
||
|---|---|---|---|---|---|
\d[S+] |
Lists all tables, views, and sequences of all schemas in the search_path. When objects with the same name exist in different schemas in the search_path, only the object in the schema that ranks first in the search_path is displayed. |
- |
Lists all tables, views, and sequences of all schemas in the search_path.
|
||
\d[S+] NAME |
Lists the structure of specified tables, views, and indexes. |
- |
Lists the structure of table a.
|
||
\d+ [PATTERN] |
Lists all tables, views, and indexes. |
If PATTERN is specified, only tables, views, and indexes whose names match PATTERN are displayed. |
Lists all tables, views, and indexes whose names start with f.
|
||
\da[S] [PATTERN] |
Lists all available aggregate functions, together with their return value types and the data types. |
If PATTERN is specified, only aggregate functions whose names match PATTERN are displayed. |
Lists all available aggregate functions whose names start with f, together with their return value types and the data types.
|
||
\db[+] [PATTERN] |
Lists all available tablespaces. |
If PATTERN is specified, only tablespaces whose names match PATTERN are displayed. |
Lists all available tablespaces whose names start with p.
|
||
\dc[S+] [PATTERN] |
Lists all available conversions between character sets. |
If PATTERN is specified, only conversions whose names match PATTERN are displayed. |
Lists all available conversions between character sets.
|
||
\dC[+] [PATTERN] |
Lists all type conversions. |
If PATTERN is specified, only conversions whose names match PATTERN are displayed. |
Lists all type conversion whose patten names start with c.
|
||
\dd[S] [PATTERN] |
Lists descriptions about objects matching PATTERN. |
If PATTERN is not specified, all visible objects are displayed. The objects include aggregations, functions, operators, types, relations (table, view, index, sequence, and large object), and rules. |
Lists all visible objects.
|
||
\ddp [PATTERN] |
Lists all default permissions. |
If PATTERN is specified, only permissions whose names match PATTERN are displayed. |
Lists all default permissions.
|
||
\dD[S+] [PATTERN] |
Lists all available domains. |
If PATTERN is specified, only domains whose names match PATTERN are displayed. |
Lists all available domains.
|
||
\ded[+] [PATTERN] |
Lists all Data Source objects. |
If PATTERN is specified, only objects whose names match PATTERN are displayed. |
Lists all Data Source objects.
|
||
\det[+] [PATTERN] |
Lists all external tables. |
If PATTERN is specified, only tables whose names match PATTERN are displayed. |
Lists all external tables.
|
||
\des[+] [PATTERN] |
Lists all external servers. |
If PATTERN is specified, only servers whose names match PATTERN are displayed. |
Lists all external servers.
|
||
\deu[+] [PATTERN] |
Lists user mappings. |
If PATTERN is specified, only information whose name matches PATTERN is displayed. |
Lists user mappings.
|
||
\dew[+] [PATTERN] |
Lists foreign-data wrappers. |
If PATTERN is specified, only data whose name matches PATTERN is displayed. |
Lists foreign-data wrappers.
|
||
\df[antw][S+] [PATTERN] |
Lists all available functions, together with their parameters and return types. a indicates an aggregate function, n indicates a common function, t indicates a trigger, and w indicates a window function. |
If PATTERN is specified, only functions whose names match PATTERN are displayed. |
Lists all available functions, together with their parameters and return types.
|
||
\dF[+] [PATTERN] |
Lists all text search configurations. |
If PATTERN is specified, only configurations whose names match PATTERN are displayed. |
Lists all text search configurations.
|
||
\dFd[+] [PATTERN] |
Lists all text search dictionaries. |
If PATTERN is specified, only dictionaries whose names match PATTERN are displayed. |
Lists all text search dictionaries.
|
||
\dFp[+] [PATTERN] |
Lists all text search parsers. |
If PATTERN is specified, only analyzers whose names match PATTERN are displayed. |
Lists all text search parsers.
|
||
\dFt[+] [PATTERN] |
Lists all text search templates. |
If PATTERN is specified, only templates whose names match PATTERN are displayed. |
Lists all text search templates.
|
||
\dg[+] [PATTERN] |
Lists all database roles.
NOTE:
Since the concepts of "users" and "groups" have been unified into "roles", this command is now equivalent to \du. The two commands are all reserved for forward compatibility. |
If PATTERN is specified, only roles whose names match PATTERN are displayed. |
List all database roles whose names start with j and end with e.
|
||
\dl |
This is an alias for \lo_list, which shows a list of large objects. |
- |
Lists all large objects.
|
||
\dL[S+] [PATTERN] |
Lists available procedural languages. |
If PATTERN is specified, only languages whose names match PATTERN are displayed. |
Lists available procedural languages.
|
||
\dn[S+] [PATTERN] |
Lists all schemas (namespace). |
If PATTERN is specified, only schemas whose names match PATTERN are displayed. By default, only schemas you created are displayed. |
Lists information about all schemas whose names start with d.
|
||
\do[S] [PATTERN] |
Lists available operators with their operand and return types. |
If PATTERN is specified, only operators whose names match PATTERN are displayed. By default, only operators you created are displayed. |
Lists available operators with their operand and return types.
|
||
\dO[S+] [PATTERN] |
Lists collations. |
If PATTERN is specified, only collations whose names match PATTERN are displayed. By default, only collations you created are displayed. |
Lists collations.
|
||
\dp [PATTERN] |
Lists tables, views, and related permissions. The following result about \dp is displayed: rolename=xxxx/yyyy --Assigning permissions to a role =xxxx/yyyy --Assigning permissions to public xxxx indicates the assigned permissions, and yyyy indicates the roles that are assigned to the permissions. For details about permission descriptions, see Table 5. |
If PATTERN is specified, only tables and views whose names match PATTERN are displayed. |
Lists tables, views, and related permissions.
|
||
\drds [PATTERN1 [PATTERN2]] |
Lists all modified configuration parameters. These settings can be for roles, for databases, or for both. PATTERN1 and PATTERN2 indicate a role pattern and a database pattern, respectively. |
If PATTERN is specified, only collations whose names match PATTERN are displayed. If the default value is used or * is specified, all settings are listed. |
Lists all modified configuration parameters of the database.
|
||
\dT[S+] [PATTERN] |
Lists all data types. |
If PATTERN is specified, only types whose names match PATTERN are displayed. |
Lists all data types.
|
||
\du[+] [PATTERN] |
Lists all database roles.
NOTE:
Since the concepts of "users" and "groups" have been unified into "roles", this command is now equivalent to \dg. The two commands are all reserved for forward compatibility. |
If PATTERN is specified, only roles whose names match PATTERN are displayed. |
Lists all database roles.
|
||
\dE[S+] [PATTERN] \di[S+] [PATTERN] \ds[S+] [PATTERN] \dt[S+] [PATTERN] \dv[S+] [PATTERN] |
In this group of commands, the letters E, i, s, t, and v stand for a foreign table, index, sequence, table, or view, respectively. You can specify any or a combination of these letters sequenced in any order to obtain an object list. For example, \dit lists all indexes and tables. If a command is suffixed with a plus sign (+), physical dimensions and related descriptions of each object will be displayed.
NOTE:
This version does not support sequences. |
If PATTERN is specified, only objects whose names match PATTERN are displayed. By default, only objects you created are displayed. You can specify PATTERN or S to view other system objects. |
Lists all indexes and views.
|
||
\dx[+] [PATTERN] |
Lists installed extensions. |
If PATTERN is specified, only extensions whose names match PATTERN are displayed. |
Lists installed extensions.
|
||
\l[+] |
Lists the names, owners, character set encoding, and permissions of all databases on the server. |
- |
Lists the names, owners, character set encoding, and permissions of all databases on the server.
|
||
\sf[+] FUNCNAME |
Shows function definitions.
NOTE:
If the function name contains parentheses, enclose the function name with quotation marks and add the parameter type list following the double quotation marks. Also enclose the list with parentheses. |
- |
Assume a function function_a and a function func()name. This parameter will be as follows:
|
||
\z [PATTERN] |
Lists all tables, views, and sequences in the database and their access permissions. |
If a pattern is given, it is a regular expression, and only matched tables, views, and sequences are displayed. |
Lists all tables, views, and sequences in the database and their access permissions.
|
Parameter |
Description |
|---|---|
r |
SELECT: allows users to read data from specified tables and views. |
w |
UPDATE: allows users to update columns for specified tables. |
a |
INSERT: allows users to insert data to specified tables. |
d |
DELETE: allows users to delete data from specified tables. |
D |
TRUNCATE: allows users to delete all data from specified tables. |
x |
REFERENCES: allows users to create foreign key constraints. |
t |
TRIGGER: allows users to create a trigger on specified tables. |
X |
EXECUTE: allows users to use specified functions and the operators that are realized by the functions. |
U |
USAGE:
|
C |
CREATE:
|
c |
CONNECT: allows users to access specified databases. |
T |
TEMPORARY: allows users to create temporary tables. |
A |
ANALYZE|ANALYSE: allows users to analyze tables. |
arwdDxtA |
ALL PRIVILEGES: grants all available permissions to specified users or roles at a time. |
* |
Authorization options for preceding permissions |
Parameter |
Description |
|---|---|
\a |
Controls the switchover between unaligned mode and aligned mode. |
\C [STRING] |
Sets the title of any table being printed as the result of a query or cancels such a setting. |
\f [STRING] |
Sets a field separator for unaligned query output. |
\H |
|
\pset NAME [VALUE] |
Sets options affecting the output of query result tables. For details about the value of NAME, see Table 7. |
\t [on|off] |
Switches the information and row count footer of the output column name. |
\T [STRING] |
Specifies attributes to be placed within the table tag in HTML output format. If the parameter is not configured, the attributes are not set. |
\x [on|off|auto] |
Switches expanded table formatting modes. |
Option |
Description |
Value Range |
|---|---|---|
border |
The value must be a number. In general, a larger number indicates wider borders and more table lines. |
|
expanded (or x) |
Switches between regular and expanded formats. |
|
fieldsep |
Specifies the field separator to be used in unaligned output format. In this way, you can create tab- or comma-separated output required by other programs. To set a tab as field separator, type \pset fieldsep '\t'. The default field separator is a vertical bar ('|'). |
- |
fieldsep_zero |
Sets the field separator to be used in unaligned output format to zero bytes. |
- |
footer |
Enables or disables the display of table footers. |
- |
format |
Selects the output format. Unique abbreviations are allowed. (That means a single letter is sufficient.) |
Value range:
|
null |
Sets a character string to be printed in place of a null value. |
By default, nothing is printed, which can easily be mistaken for an empty character string. |
numericlocale |
Enables or disables the display of a locale-specific character to separate groups of digits to the left of the decimal marker. |
If this parameter is ignored, the default separator is displayed. |
pager |
Controls the use of a pager for query and gsql help outputs. If the PAGER environment variable is set, the output is piped to the specified program. Otherwise, a platform-dependent default is used. |
|
recordsep |
Specifies the record separator to be used in unaligned output format. |
- |
recordsep_zero |
Specifies the record separator to be used in unaligned output format to zero bytes. |
- |
tableattr (or T) |
Specifies attributes to be placed inside the HTML table tag in HTML output format (such as cellpadding or bgcolor). Note that you do not need to specify border here because it has been used by \pset border. If no value is given, the table attributes do not need to be set. |
- |
title |
Specifies the table title for any subsequently printed tables. This can be used to give your output descriptive tags. If no value is given, the title does not need to be set. |
- |
tuples_only (or t) |
Enables or disables the tuples-only mode. Full display may show extra information, such as column headers, titles, and footers. In tuples_only mode, only the table data is displayed. |
- |
Parameter |
Description |
Value Range |
|---|---|---|
\c[onnect] [DBNAME|- USER|- HOST|- PORT|-] |
Connects to a new database. (The current database is gaussdb.) If a database name contains more than 63 bytes, only the first 63 bytes are valid and are used for connection. However, the database name displayed in the gsql CLI is still the name before the truncation.
NOTE:
If the database login user is changed during reconnection, you need to enter the password of the new user. The maximum length of the password is 999 bytes, which is restricted by the maximum value of the GUC parameter password max length. |
- |
\encoding [ENCODING] |
Sets the client character set encoding. |
This command shows the current encoding if it has no parameter. |
\conninfo |
Outputs information about the current database connection. |
- |
Parameter |
Description |
Value Range |
|---|---|---|
\cd [DIR] |
Changes the current working directory. |
An absolute path or relative path that meets the OS path naming convention |
\setenv NAME [VALUE] |
Sets the NAME environment variable to VALUE. If VALUE is not provided, do not set the environment variable. |
- |
\timing [on|off] |
Toggles a display of how long each SQL statement takes, in milliseconds. |
|
\! [COMMAND] |
Escapes to a separate Unix shell or runs a Unix command. |
- |
Parameter |
Description |
|---|---|
\prompt [TEXT] NAME |
Prompts the user to use texts to specify a variable name. |
\set [NAME [VALUE]] |
Sets the NAME internal variable to VALUE. If more than one value is provided, NAME is set to the concatenation of all of them. If only one parameter is provided, the variable is set with an empty value. Some common variables are processed in another way in gsql, and they are the combination of uppercase letters, numbers, and underscores. Table 11 describes a list of variables that are processed in a way different from other variables. |
\set-multi NAME [VALUE] \end-multi |
Sets the internal variable NAME to VALUE that can consist of multiple lines of character strings. When \set-multi is used, the second parameter must be provided. For details, see the following example of using the \set-multi meta-command.
NOTE:
The meta-commands in \set-multi and \end-multi will be ignored. |
\unset NAME |
Deletes the variable name of gsql. |
\set-multi meta-command example
The file test.sql is used as an example.
\set-multi multi_line_var
select
id,name
from
student;
\end-multi
\echo multi_line_var is "${multi_line_var}"
\echo -------------------------
\echo result is
${multi_line_var}
gsql -d gaussdb -p 25308 --dynamic-param -f test.sql execution result:
multi_line_var is "select
id,name
from
student; "
-------------------------
result is
id | name
----+-------
1 | Jack
2 | Tom
3 | Jerry
4 | Danny
(4 rows)
Run the \set-multi \end-multi command to set the variable multi_line_var to a SQL statement and obtain the variable through dynamic variable parsing.
The file test.sql is used as an example.
\set-multi multi_line_var
select 1 as id;
select 2 as id;
\end-multi
\echo multi_line_var is "${multi_line_var}"
\echo -------------------------
\echo result is
${multi_line_var}
gsql -d -p 25308 --dynamic-param -f test.sql execution result:
multi_line_var is "select 1 as id; select 2 as id;" ------------------------- result is id ---- 1 (1 row) id ---- 2 (1 row)
Run the \set-multi \end-multi command to set the variable multi_line_var to two SQL statement and obtain the variable through dynamic variable parsing. Because the content in the variable ends with a semicolon (;), gsql sends the SQL statement and obtains the printed execution result.
Command |
Description |
Value Range |
|---|---|---|
\set VERBOSITY value |
This variable can be set to default, verbose, or terse to control redundant lines of error reports. |
Value range: default, verbose, terse |
\set ON_ERROR_STOP value |
If this variable is set, the script execution stops immediately. If this script is invoked from another script, that script will be stopped immediately as well. If the primary script is invoked using the -f option rather than from one gsql session, gsql will return error code 3, indicating the difference between the current error and critical errors. (The error code for critical errors is 1.) |
Value range: on/off, true/false, yes/no, 1/0 |
\set RETRY [retry_times] |
Determines whether to enable the retry function if statement execution encounters errors. The parameter retry_times specifies the maximum number of retry times and the default value is 5. Its value ranges from 5 to 10. If the retry function has been enabled, when you run the \set RETRY command again, the retry function will be disabled. The configuration file retry_errcodes.conf shows a list of errors. If these errors occur, retry is required. This configuration file is placed in the same directory as that for executable gsql programs. This configuration file is configured by the system rather than by users and cannot be modified by the users. The retry function can be used in the following 13 error scenarios:
If an error occurs, gsql queries connection status of all CNs and DNs. If the connection status is abnormal, gsql sleeps for 1 minute and tries again. In this case, the retries in most of the primary/standby switchover scenarios are involved.
NOTE:
|
Value range of retry_times: 5 to 10 |
Parameter |
Description |
|---|---|
\lo_list |
Shows a list of all GaussDB(DWS) large objects stored in the database, as well as the comments provided for them. |
Parameter |
Description |
Value Range |
|---|---|---|
\if EXPR \elif EXPR \else \endif |
This set of meta-commands can implement nested conditional blocks:
|
|
\goto LABEL \label LABEL |
This set of meta-commands can be used to implement unconditional redirections:
NOTE:
|
|
\for \loop \exit-for \end-for |
This set of meta-commands can be used to implement loops:
|
- |
An example of using flow control meta-commands is as follows:
- \if conditional block use example:
The file test.sql is used as an example.
SELECT 'Jack' AS "Name"; \if ${ERROR} \echo 'An error occurred in the SQL statement' \echo ${LAST_ERROR_MESSAGE} \elif '${Name}' == 'Jack' \echo 'I am Jack' \else \echo 'I am not Jack' \endifgsql -d -p 25308 --dynamic-param -f test.sql execution result:
Name ------ Jack (1 row) I am Jack
The preceding execution result indicates that the first SQL statement is successfully executed and the Name variable is set. Therefore, the \elif branch is executed and the output is I am Jack. For details about the usage of the special variables ERROR and LAST_ERROR_MESSAGE, see Table 2.
- \if conditional block comparison rules and examples
- default: Specifies the default comparison policy. Only strings or numbers can be compared, and strings cannot be compared with numbers. Parameters inside single quotation marks (') are identified as strings, and parameters outside single quotation marks (') are identified as numbers.
The file test.sql is used as an example.
\set Name 'Jack' \set ID 1002 -- Parameters inside single quotation marks (') are identified as strings for comparison. \if '${Name}' != 'Jack' \echo 'I am not Jack' -- Without single quotation marks ('), parameters are identified as numbers for comparison. \elif ${ID} > 1000 \echo 'Jack\'id is bigger than 1000' \else \echo 'error' \endifgsql -d -p 25308 --dynamic-param -f test.sql execution result:
Jack'id is bigger than 1000
If single quotation marks (') are used on one side of the operator and not used on the other side, the comparison is performed between a string and a number. Such comparison is not supported and an error is reported.
postgres=> \set Name 'Jack' postgres=> \if ${Name} == 'Jack' ERROR: left[Jack] is a string without quote or number, and right['Jack'] is a string with quote, \if or \elif does not support this expression. WARNING: The input with quote are treated as a string, and the input without quote are treated as a number. postgres@> \endif- natural: The default comparison policy is supported, and parameters that contain dynamic variables can also be identified as strings. When one side of the comparison operator is a number, try to convert the other side to a number, and then compare the numbers on both sides. If the conversion fails, an error is reported and the comparison result is false.
- Parameters that contain dynamic variables can be identified as strings when single quotation marks (') are used, for example, 'Jack', or the string contains a dynamic variable (${VAR} or :VAR), for example, ${Name}_data. If both of the preceding conditions are met, for example, '${Name}_data', parameters that contain dynamic variables can also be identified as strings.
- For parameters that cannot be identified as strings, try to identify them as numbers. If a parameter cannot be converted to a number, an error is reported. For example, 1011Q1 does not use single quotation marks (') or contain dynamic variables, and cannot be converted to a number.
- If one side of the comparison operator is not identified as a string or number, the comparison fails and an error is reported.
- If one side of the comparison operator is identified as a number, the comparison is performed based on numbers. If the other side cannot be converted to a number, an error is reported.
- If both sides of the comparison operator are identified as strings, the comparison is performed based on strings.
The test.sql file is an example of comparing strings.
\set COMPARE_STRATEGY natural SELECT 'Jack' AS "Name"; -- The comparison result is equivalent to that of '${Name}' > 'Jack'. \if ${Name} == 'Jack' \echo 'I am Jack' \else \echo 'I am not Jack' \endifgsql -d -p 25308 --dynamic-param -f test.sql execution result:
Name ------ Jack (1 row) I am Jack
The test.sql file is an example of comparing numbers.
\set COMPARE_STRATEGY natural SELECT 1022 AS id; -- If ${id} == '01022' is used, the result is not equal because strings on both sides are compared. \if ${id} == 01022 \echo 'id is 1022' \else \echo 'id is not 1022' \endifgsql -d -p 25308 --dynamic-param -f test.sql execution result:
id ------ 1022 (1 row) id is 1022
Examples of comparison errors are shown as follows.
-- One side of the operator cannot be identified as a string or number. postgres=> \set COMPARE_STRATEGY natural postgres=> \if ${Id} > 123sd ERROR: The right[123sd] can not be treated as a string or a number. A numeric string should contain only digits and one decimal point, and a string should be enclosed in quote or contain dynamic variables, please check it. -- Numbers on one side of the operator cannot be correctly converted. postgres=> \set COMPARE_STRATEGY natural postgres=> \if ${Id} <> 11101.1.1 ERROR: The right[11101.1.1] can not be treated as a string or a number. A numeric string should contain only digits and one decimal point, and a string should be enclosed in quote or contain dynamic variables, please check it.- equal: Only the equality comparison is supported. The comparison is performed based on strings.
The file test.sql is used as an example.
\set COMPARE_STRATEGY equal SELECT 'Jack' AS "Name"; \if ${ERROR} \echo 'An error occurred in the SQL statement' -- If the value is set to equal, only the equality comparison is supported. An error is reported when the values are compared, and there is no delimiter. The following comparison result is equivalent to that of ${Name} == Jack. \elif '${Name}' == 'Jack' \echo 'I am Jack' \else \echo 'I am not Jack' \endifgsql -d -p 25308 --dynamic-param -f test.sql execution result:
Name ------ Jack (1 row) I am Jack
- \goto \label redirection example:
The file test.sql is used as an example.
\set Name Tom \goto TEST_LABEL SELECT 'Jack' AS "Name"; \label TEST_LABEL \echo ${Name}gsql -d -p 25308 --dynamic-param -f test.sql execution result:
Tom
The preceding execution result indicates that the \goto meta-command directly executes the \echo command without re-assigning a value to the variable Name.
- Example of using \if conditional block and the \goto \label together
The file test.sql is used as an example.
\set Count 1 \label LOOP \if ${Count} != 3 SELECT ${Count} + 1 AS "Count"; \goto LOOP \endif \echo Count = ${Count}gsql -d -p 25308 --dynamic-param -f test.sql execution result:
Count ------- 2 (1 row) Count ------- 3 (1 row) Count = 3The preceding execution result indicates that a simple loop is implemented through the combination of the \if conditional block and \goto \label.
- Example of Using \for Loop Blocks
To demonstrate this function, the example data is as follows:
create table student (id int, name varchar(32)); insert into student values (1, 'Jack'); insert into student values (2, 'Tom'); insert into student values (3, 'Jerry'); insert into student values (4, 'Danny'); create table course (class_id int, class_day varchar(5), student_id int); insert into course values (1004, 'Fri', 2); insert into course values (1003, 'Tue', 1); insert into course values (1003, 'Tue', 4); insert into course values (1002, 'Wed', 3); insert into course values (1001, 'Mon', 2);
\for loop use sample file test.sql:
\for select id, name from student order by id limit 3 offset 0 \loop \echo -[ RECORD ]+----- \echo id '\t'| ${id} \echo name '\t'| ${name} \end-forgsql -d -p 25308 --dynamic-param -f test.sql execution result:
-[ RECORD ]+----- id | 1 name | Jack -[ RECORD ]+----- id | 2 name | Tom -[ RECORD ]+----- id | 3 name | Jerry
The preceding execution result indicates that the loop block is used to traverse the execution result of the SQL statement. More statements can appear between \loop and \end-for to implement complex logic.
If the SQL statement used as a loop condition fails to be executed or the result set is empty, the statement between \loop and \end-for will not be executed.
The file test.sql is used as an example.
\for select id, name from student_error order by id limit 3 offset 0 \loop \echo -[ RECORD ]+----- \echo id '\t'| ${id} \echo name '\t'| ${name} \end-forgsql -d -p 25308 --dynamic-param -f test.sql execution result:
gsql:test.sql:3: ERROR: relation "student_error" does not exist LINE 1: select id, name from student_error order by id limit 3 offse... ^The preceding command output indicates that the student_error table does not exist. Therefore, the SQL statement fails to be executed, and the statement between \loop and \end-for is not executed.
- \exit-for exits the loop.
The file test.sql is used as an example.
\for select id, name from student order by id \loop \echo ${id} ${name} \if ${id} == 2 \echo find id(2), name is ${name} \exit-for \endif \end-forgsql -d -p 25308 --dynamic-param -f test.sql execution result:
1 Jack 2 Tom find id(2), name is Tom
If the student table contains more than two rows of data and id is set to 2, run the \exit-for command to exit the loop. This process is also used together with the \if condition block.
- \for loop nesting
The file test.sql is used as an example.
\for select id, name from student order by id limit 2 offset 0 \loop \echo ${id} ${name} \for select class_id, class_day from course where student_id = ${id} order by class_id \loop \echo ' '${class_id}, ${class_day} \end-for \end-forgsql -d -p 25308 --dynamic-param -f test.sql execution result:
1 Jack 1003, Tue 2 Tom 1001, Mon 1004, Fri
Obtain the information about Jack and Tom in the course table through the two-layer loop.
PATTERN
The various \d commands accept a PATTERN parameter to specify the object name to be displayed. In the simplest case, a pattern is just the exact name of the object. The characters within a pattern are normally folded to lower case, similar to those in SQL names. For example, \dt FOO will display the table named foo. As in SQL names, placing double quotation marks (") around a pattern prevents them being folded to lower case. If you need to include a double quotation mark (") in a pattern, write it as a pair of double quotation marks ("") within a double-quote sequence, which is in accordance with the rules for SQL quoted identifiers. For example, \dt "FOO""BAR" will be displayed as a table named FOO"BAR instead of foo"bar. You cannot put double quotation marks around just part of a pattern, which is different from the normal rules for SQL names. For example, \dt FOO"FOO"BAR will be displayed as a table named fooFOObar if just part of a pattern is quoted.
Whenever the PATTERN parameter is omitted completely, the \d commands display all objects that are visible in the current schema search path, which is equivalent to using an asterisk (*) as the pattern. An object is regarded to be visible if it can be referenced by name without explicit schema qualification. To see all objects in the database regardless of their visibility, use a dot within double quotation marks (*.*) as the pattern.
Within a pattern, the asterisk (*) matches any sequence of characters (including no characters) and a question mark (?) matches any single character. This notation is comparable to Unix shell file name patterns. For example, \dt int* displays tables whose names begin with int. But within double quotation marks, the asterisk (*) and the question mark (?) lose these special meanings and are just matched literally.
A pattern that contains a dot (.) is interpreted as a schema name pattern followed by an object name pattern. For example, \dt foo*.*bar* displays all tables (whose names include bar) in schemas starting with foo. If no dot appears, then the pattern matches only visible objects in the current schema search path. Again, a dot within double quotation marks loses its special meaning and is matched literally.
Advanced users can use regular-expression notations, such as character classes. For example, [0-9] can be used to match any number. All regular-expression special characters work as specified in "POSIX regular expressions" in the Developer Guide, except the following characters:
- A dot (.) is used as a separator.
- An asterisk (*) is translated into an asterisk prefixed with a dot (.*), which is a regular-expression marking.
- A question mark (?) is translated into a dot (.).
- A dollar sign ($) is matched literally.
You can write ?, (R+|), (R|), and R to the following pattern characters: ., R*, and R?. The dollar sign ($) does not need to work as a regular-expression character since the pattern must match the whole name, which is different from the usual interpretation of regular expressions. In other words, the dollar sign ($) is automatically appended to your pattern. If you do not expect a pattern to be anchored, write an asterisk (*) at its beginning or end. All regular-expression special characters within double quotation marks lose their special meanings and are matched literally. Regular-expression special characters in operator name patterns (such as the \do parameter) are also matched literally.
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot
