Updated on 2024-06-03 GMT+08:00

LOCK

Description

LOCK TABLE obtains a table-level lock.

GaussDB always tries to select the lock mode with minimum constraints when automatically requesting a lock for a statement referenced by a table. Use LOCK if users need a more strict lock mode. For example, suppose an application runs a transaction at the Read Committed isolation level and needs to ensure that data in a table remains stable in the duration of the transaction. To achieve this, you could obtain SHARE lock mode over the table before the query. This can prevent concurrent data changes and ensure subsequent reads of the table see a stable view of committed data. It is because the SHARE lock mode conflicts with the ROW EXCLUSIVE lock acquired by writers, and your LOCK TABLE name IN SHARE MODE statement will wait until any concurrent holders of ROW EXCLUSIVE mode locks commit or roll back. Therefore, once you obtain the lock, there are no uncommitted writes outstanding; furthermore none can begin until you release the lock.

Precautions

  • LOCK TABLE is useless outside a transaction block: the lock would remain held only to the completion of the statement. If LOCK TABLE is out of any transaction block, an error is reported.
  • If no lock mode is specified, then ACCESS EXCLUSIVE, the most restrictive mode, is used.
  • LOCK TABLE ... IN ACCESS SHARE MODE requires the SELECT permission on the target table. All other forms of LOCK require table-level UPDATE and/or the DELETE permission.
  • There is no UNLOCK TABLE statement. Locks are always released at transaction end.
  • LOCK TABLE only deals with table-level locks, and so the mode names involving ROW are all misnomers. These mode names should generally be read as indicating the intention of the user to acquire row-level locks within the locked table. Also, ROW EXCLUSIVE mode is a shareable table lock. Note that all lock modes have the same semantics as long as LOCK TABLE is involved. The only difference lies in whether locks conflict with each other. For details about the rules, see Table 1.
  • If the xc_maintenance_mode parameter is not enabled, an error is reported when an ACCESS EXCLUSIVE lock is applied for a system catalog.
  • Only the redistribution tool can use the automatic CANCEL service interface.

Syntax

LOCK [ TABLE ] {[ ONLY ] name [, ...]| {name [ * ]} [, ...]}
    [ IN {ACCESS SHARE | ROW SHARE | ROW EXCLUSIVE | SHARE UPDATE EXCLUSIVE | SHARE | SHARE ROW EXCLUSIVE | EXCLUSIVE | ACCESS EXCLUSIVE} MODE ]
    [ NOWAIT ][CANCELABLE];

Parameters

Table 1 Lock mode conflicts

Requested Lock Mode/Current Lock Mode

ACCESS SHARE

ROW SHARE

ROW EXCLUSIVE

SHARE UPDATE EXCLUSIVE

SHARE

SHARE ROW EXCLUSIVE

EXCLUSIVE

ACCESS EXCLUSIVE

ACCESS SHARE

-

-

-

-

-

-

-

X

ROW SHARE

-

-

-

-

-

-

X

X

ROW EXCLUSIVE

-

-

-

-

X

X

X

X

SHARE UPDATE EXCLUSIVE

-

-

-

X

X

X

X

X

SHARE

-

-

X

X

-

X

X

X

SHARE ROW EXCLUSIVE

-

-

X

X

X

X

X

X

EXCLUSIVE

-

X

X

X

X

X

X

X

ACCESS EXCLUSIVE

X

X

X

X

X

X

X

X

LOCK parameters are as follows:

  • name

    Specifies the name (optionally schema-qualified) of an existing table to lock.

    Tables are locked one-by-one in the order specified in the LOCK TABLE statement.

    Value range: an existing table name

    You can use database links to perform operations on remote tables. For details, see DATABASE LINK.

  • ONLY

    If ONLY is specified, only that table is locked. If it is not specified, the table and all its sub-tables are locked.

  • ACCESS SHARE

    Allows only read operations on a table. In general, any SQL statements that only read a table and do not modify it will acquire this lock mode. The SELECT statement acquires an ACCESS SHARE lock on referenced tables.

  • ROW SHARE

    Allows concurrent read of a table but does not allow any other operations on the table.

    SELECT FOR UPDATE and SELECT FOR SHARE automatically acquire the ROW SHARE lock on the target table and add the ACCESS SHARE lock to other referenced tables except FOR SHARE and FOR UPDATE.

    For a partitioned table, SELECT FOR SHARE obtains the ROW EXCLUSIVE lock of the partition object on the DN for concurrency control.

  • ROW EXCLUSIVE

    Allows concurrent read of a table but does not allow modification of data in the table. ROW EXCLUSIVE is the same as ROW SHARE. UPDATE, DELETE, and INSERT automatically acquire this lock on the target table and add the ACCESS SHARE lock to other referenced tables. Generally, all statements that modify table data acquire the ROW EXCLUSIVE lock for tables.

  • SHARE UPDATE EXCLUSIVE

    Protects a table against concurrent schema changes and VACUUM runs.

    The VACUUM (without FULL), ANALYZE, and CREATE INDEX CONCURRENTLY statements automatically request this lock.

  • SHARE

    Allows concurrent queries of a table but does not allow modification of the table.

    The CREATE INDEX (without CONCURRENTLY) statement automatically requests this lock.

  • SHARE ROW EXCLUSIVE

    Protects a table against concurrent data changes, and is self-exclusive so that only one session can hold it at a time.

    No SQL statements automatically acquire this lock mode.

  • EXCLUSIVE

    Allows concurrent queries of the target table but does not allow any other operations.

    This mode allows only concurrent ACCESS SHARE locks; that is, only reads from the table can proceed in parallel with a transaction holding this lock mode.

    No SQL statements automatically acquire this lock mode on user tables. However, it will be acquired on some system catalogs in case of some operations.

  • ACCESS EXCLUSIVE

    Guarantees that the holder is the only transaction accessing the table in any way.

    Acquired by the ALTER TABLE, DROP TABLE, TRUNCATE, REINDEX, CLUSTER, and VACUUM FULL commands.

    This is also the default lock mode for LOCK TABLE statements that do not specify a mode explicitly.

  • NOWAIT

    Specifies that LOCK TABLE should not wait for any conflicting locks to be released: if the specified lock(s) cannot be acquired immediately without waiting, the transaction is aborted.

    If a table-level lock is obtained without specifying NOWAIT and other mutex locks exist, the system waits for other locks to be released.

  • CANCELABLE

    Allows the waiting thread to send CANCEL signals to the holding threads and waiting threads.

    Only the redistribution tool can use this parameter. An error message is displayed when the parameter is used by users.

Examples

  • SHARE ROW EXCLUSIVE
    -- Create a schema.
    gaussdb=# CREATE SCHEMA tpcds;
    
    -- Create the tpcds.reason table.
    gaussdb=# CREATE TABLE tpcds.reason (
    r_reason_sk         INTEGER      NOT NULL,
    r_reason_id         CHAR(16)     NOT NULL,
    r_reason_desc       INTEGER
    );
    
    -- Insert multiple records into the table.
    gaussdb=# INSERT INTO tpcds.reason VALUES (1, 'AAAAAAAABAAAAAAA', '18'),(5, 'AAAAAAAACAAAAAAA', '362'),(7, 'AAAAAAAADAAAAAAA', '585');
    
    -- Create a table named reason_t1.
    gaussdb=# CREATE TABLE tpcds.reason_t1 AS TABLE tpcds.reason;
    
    -- Start a transaction.
    gaussdb=# START TRANSACTION;
    
    -- Use the SHARE ROW EXCLUSIVE MODE lock mode to lock a table.
    gaussdb=# LOCK TABLE tpcds.reason_t1 IN SHARE ROW EXCLUSIVE MODE;
    
    -- If you perform the DELETE operation on another device, the operation is blocked.
    gaussdb=# DELETE FROM tpcds.reason_t1 WHERE r_reason_sk = 7; 
    
    -- End the transaction and release the lock.
    gaussdb=# COMMIT;
    
  • ROW EXCLUSIVE
    -- Start a transaction.
    gaussdb=# START TRANSACTION;
    
    -- After the UPDATE statement is executed, request a ROW EXCLUSIVE lock on the referenced table.
    gaussdb=# UPDATE tpcds.reason_t1 SET r_reason_desc=180 WHERE r_reason_sk=1;
    
    -- When the ALTER TABLE statement is executed on another device, the operation is blocked.
    gaussdb=# ALTER TABLE tpcds.reason_t1 ADD r_reason_asc int;
    
    -- End the transaction and release the lock.
    gaussdb=# COMMIT;
  • ACCESS EXCLUSIVE
    -- Start a transaction.
    gaussdb=# START TRANSACTION;
    
    -- After the TRUNCATE statement is executed, request an ACCESS SHARE lock on the referenced table.
    gaussdb=# TRUNCATE tpcds.reason_t1;
    
    -- When the SELECT statement is executed on another device, the operation is blocked.
    gaussdb=# SELECT * FROM tpcds.reason_t1;
    
    -- End the transaction and release the lock.
    gaussdb=# COMMIT;
    
    -- Delete the tpcds.reason_t1 table.
    gaussdb=# DROP TABLE tpcds.reason_t1;
    
    -- Delete the tpcds.reason table.
    gaussdb=# DROP TABLE tpcds.reason;
    
    -- Delete a schema.
    gaussdb=# DROP SCHEMA tpcds CASCADE;