Help Center/ Atlas 500 Application/ Software Development Guide/ Configuring the Atlas 500/ Powering On an Atlas 500
Updated on 2022-03-13 GMT+08:00
View PDF
Share

Powering On an Atlas 500

  1. Power on the system by referring to "Power-On Procedure" in the Atlas 500 AI Edge Station User Guide (Models 3000, 3010).
  2. Wait 1-2 minutes after the device is powered on for the OS and device management software to start.
  3. After the system is started, check the status of the indicators and buttons on the front panel of the Atlas 500 by referring to "Indicators and Buttons" in the Atlas 500 AI Edge Station User Guide (Models 3000, 3010).

    • For the Atlas 500 (without a disk), both the graceful power-off indicator and health indicator are green. If the green indicators are steady on, the system is normal.
    • For the Atlas 500 (with a disk), the graceful power-off indicator, health indicator, and disk indicator are green. If the green indicators are steady on, the system is normal. Otherwise, the system is abnormal.