Internet Access IP Address Control

Scenarios

You can enable or disable Internet access IP address control to restrict the Internet access of terminals. Enabling such control will prohibit the Internet access of all terminal users. You can set a whitelist of IP addresses for Internet access. Clients using these IP addresses can connect to cloud desktops via the Internet.

If you do not set a whitelist after enabling Internet access IP address control, Internet access is prohibited for all terminals.

Prerequisites

Internet access has been enabled for the current project.

Procedure

1. Log in to the console.
2. Choose Policies > Access Policies.

   The Access Policies page is displayed.

3. Select the Internet Access IP Address Control tab.

Enabling Internet access IP address control

4. Configure Internet access IP address control.
   • : enabled. Only the terminals within the added IP address segment can access the Internet.
   • : disabled. Terminals in all IP address segments can access the Internet.

5. Select a restriction range.
   • You can allow some IP addresses to access the Internet. In this case, only the terminals within the added IP address segment can access the Internet.

     After allowing some IP addresses to access the Internet, click Add to go to the Add Internet IP Address Access Control page.

     Select a method of adding:

     1. Add manually:
        1. Enter the IP address and subnet mask of the terminal.
        2. Click Add below to add multiple records.
        3. Click OK.
     2. Batch add:
        1. Click Download Template and enter the IP address and subnet mask of the terminal in the template.
        2. Click Add to upload a local template file.
           

           Upload an Excel file no larger than 1 MB.

        3. Click OK.
   • You can prohibit all IP addresses from accessing the Internet. In this case, all terminals cannot access the Internet.

Deleting IP addresses

To remove the Internet access restriction on a terminal, delete the IP address of the terminal from the IP address list.

6. Choose Policies > Access Policies.

   The Access Policies page is displayed.

7. In the top navigation bar, select the Internet Access IP Address Control tab.
8. In the IP address list, delete the desired IP addresses.
   • To delete one IP address, click Delete in the Operation column of the IP address and click OK.
   • To batch delete IP addresses, select the IP addresses from the IP address list, click Delete above the list, and click OK.

Disabling Internet access IP address control

9. Toggle off on the right of Internet Access IP Address Control. The Disable Internet IP Address Access Control dialog box is displayed.
   

   Disabling this policy allows all terminals to access cloud desktops using Internet IP addresses.

10. Click OK.