Diese Seite ist in Ihrer lokalen Sprache noch nicht verfügbar. Wir arbeiten daran, weitere Sprachversionen hinzuzufügen. Vielen Dank für Ihre Unterstützung.
- What's New
- Function Overview
- Product Bulletin
- Service Overview
- Getting Started
- User Guide
- API Reference
-
Best Practices
- Direct Connect Best Practices
- Connecting an On-Premises Data Center to a VPC over a Single Connection and Using Static Routing to Route Traffic
- Connecting an On-Premises Data Center to a VPC over a Single Connection and Using BGP Routing to Route Traffic
- Connecting an On-Premises Data Center to a VPC over Two Connections in Load Balancing Mode (Virtual Gateway)
- Connecting an On-Premises Data Center to a VPC over Two Connections in an Active/Standby Pair (Virtual Gateway)
- Connecting an On-Premises Data Center to Multiple VPCs that Do Not Need to Communicate with Each Other
- Connecting an On-Premises Data Center to Multiple VPCs in the Same Region Using Direct Connect and VPC Peering
- Using a Public NAT Gateway and Direct Connect to Accelerate Internet Access
- Troubleshooting
-
FAQs
-
Popular Questions
- What Are the Network Requirements for Connections?
- How Do I Select a Carrier When Purchasing a Connection?
- How Will I Be Billed for Direct Connect?
- How Do I Submit a Service Ticket?
- How Do I Test the Network Connectivity Between a Location and the Cloud?
- What Do I Do If I Select the Wrong Carrier When Creating a Connection?
-
Product Consultation
- What Are the Network Requirements for Connections?
- What Are 1GE and 10GE?
- Is BGP Routing Supported in Direct Connect?
- How Do I Submit a Service Ticket?
- What Are the Network Latency and Packet Loss Rate of a Connection?
- Are the Uplink and Downlink Bandwidths of a Direct Connect Connection the Same?
- What Do I Do If I Select the Wrong Carrier When Creating a Connection?
- How Do I Plan the VPCs for a New Connection?
- What Are Local and Remote Gateways (Interconnection IP Addresses)?
- How Do I Configure BFD for a Connection?
- Leased Line
-
Interconnection with the Cloud
- Can I Access the Same VPC over Multiple Connections?
- How Do I Plan the CIDR Blocks for a Connection?
- What Should I Consider When I Use Direct Connect to Access the Cloud?
- Does Direct Connect Support NAT?
- Can the VLAN of the On-premises Network Be Used in the VPC Through Direct Connect?
- Can My On-Premises Data Center Access Multiple VPCs Through One Connection?
- Can Direct Connect Be Used with Similar Services of Other Cloud Service Providers?
-
Networking and Scenarios
- Can Multiple Connections Access the Same VPC?
- Can My On-Premises Data Center Access Multiple VPCs Through One Connection?
- Can Direct Connect Be Used with Similar Services of Other Cloud Service Providers?
- Can I Limit the Bandwidth Available on Each Hosted Connection?
- How Do I Plan the VPCs for a New Connection?
-
Related Console Operations
- How Do I Submit a Service Ticket?
- How Can I Unsubscribe from Direct Connect?
- What Parameters Can Be Modified After I Have Created a Virtual Interface?
- Do I Need to Delete the Virtual Gateway and Virtual Interface Before Deleting a Hosted Connection?
- How Do I Change the Routing Mode of a Connection?
- How Do I Delete a Hosted Connection?
- What Is the BGP ASN Used by Huawei Cloud?
- What Are Local and Remote Gateways (Interconnection IP Addresses)?
- Troubleshooting
- Billing
- Resource Monitoring
- Quota
-
Popular Questions
Show all
Metrics
Function
Table 1 describes the metrics reported by Direct Connect to Cloud Eye as well as their namespace and dimensions. You can use the management console to query the metrics of the monitored objects and alarms generated for Direct Connect.
You can view metrics of standard connections, full-service connections (dedicated port), and hosted connections.
Namespace
SYS.DCAAS
Metrics
ID |
Metric |
Description |
Value Range |
Monitored Object |
Monitoring Interval |
---|---|---|---|---|---|
network_incoming_bits_rate |
Network Incoming Bandwidth |
Bit rate for inbound data to the Direct Connect side of a connection Unit: bit/s |
≥ 0 bits/s |
Connections and historical connections |
1 minute |
network_outgoing_bits_rate |
Network Outgoing Bandwidth |
Bit rate for outbound data from the Direct Connect side of a connection Unit: bit/s |
≥ 0 bits/s |
Connections and historical connections |
1 minute |
network_incoming_bytes |
Network Incoming Traffic |
Number of bytes for inbound data to the Direct Connect side of a connection Unit: byte |
≥ 0 bytes |
Connections and historical connections |
1 minute |
network_outgoing_bytes |
Network Outgoing Traffic |
Number of bytes for outbound data from the Direct Connect side of a connection Unit: byte |
≥ 0 bytes |
Connections and historical connections |
1 minute |
network_incoming_packets_rate |
Network Incoming Packet Rate |
Packet rate for inbound data to the Direct Connect side of a connection Unit: Packet/s |
≥ 0 packets/s |
Connections and historical connections |
1 minute |
network_outgoing_packets_rate |
Network Outgoing Packet Rate |
Packet rate for outbound data from the Direct Connect side of a connection Unit: Packet/s |
≥ 0 packets/s |
Connections and historical connections |
1 minute |
network_incoming_packets |
Network Incoming Packets |
Number of packets for inbound data to the Direct Connect side of a connection Unit: Packet |
≥ 0 packets |
Connections and historical connections |
1 minute |
network_outgoing_packets |
Network Outgoing Packets |
Number of packets for outbound data from the Direct Connect side of a connection Unit: Packet |
≥ 0 packets |
Connections and historical connections |
1 minute |
Dimensions
Key |
Value |
---|---|
direct_connect_id |
Connection |
virtual_interface_id |
Virtual interface |
history_direct_connect_id |
Historical connection |
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.