From PostgreSQL on ECS to RDS PostgreSQL

Diagram

Figure 1 Source and destination databases in the same VPC

Figure 2 Source and destination databases in the same region and different VPCs

Synchronization Process

Figure 3 Flowchart

Synchronization Suggestions (Important)

• Database synchronization is closely impacted by a wide range of environmental and operational factors. To ensure the synchronization goes smoothly, you are advised to perform a test run before the actual synchronization to help you detect and resolve any potential issues in advance. Recommendations on how to minimize any potential impacts on your data base are provided in this section.
• It is strongly recommended that you start a task during off-peak hours. A less active database is easier to synchronize successfully. If the data is fairly static, there is less likely to be any severe performance impacts during the synchronization.

Notes on Synchronization (Important)

Before creating a real-time synchronization task, read this section carefully.

For details, see Precautions in Real-Time Synchronization.

Synchronization Preparations

1. Permissions
   Table 1 lists the source and destination database user permissions required in full and incremental synchronization from PostgreSQL databases on ECS to the PostgreSQL DB instances on the current cloud.

   Table 1 Account permissions

   Synchronization Type	Full	Full+Incremental
   Source	Database: CONNENT Schema: USAGE Table with a primary key: SELECT Tables without primary keys: SELECT, UPDATE, DELETE, and TRUNCATE Sequence: SELECT	Account: REPLICATION Database: CONNENT Schema: USAGE Table with a primary key: SELECT Tables without primary keys: SELECT, UPDATE, DELETE, and TRUNCATE Sequence: SELECT
   Destination	CREATEDB	CREATEDB, CREATEROLE

   • Source database permissions:

     The source database user must have all the required permissions listed in Table 1. If the permissions are insufficient, create a user that has all of the permissions on the source database.

   • Destination database permissions:

     If the destination database is a PostgreSQL database on the current cloud, the initial account can be used.

2. Network settings
   • The source and destination databases must be in the same region.
   • The source and destination databases can be either in the same VPC or different VPCs.
     • If the source and destination databases are in different VPCs, the subnets of the source and destination databases are required to be in different CIDR blocks. You need to create a VPC peering connection between the two VPCs. For details, see .
     • If the source and destination databases are in the same VPC, the networks are interconnected by default.
3. Security rules
   • In the same VPC, the network is connected by default. You do not need to set a security group.
   • In different VPCs, establish a VPC peering connection between the two VPCs. You do not need to set a security group.
4. Other

   DRS can synchronize only some types of DDL statements of PostgreSQL. For details, see related guides. Properly plan the source database services. Do not perform DDL operations that are not supported during synchronization.

Procedure

1. Create a synchronization task.
   1. Log in to the management console and choose Databases > Data Replication Service to go to the DRS console.
   2. On the Data Synchronization Management page, click Create Synchronization Task.
   3. On the displayed page, specify the task name, exception notification, task description, and synchronization instance details.
      Figure 4 Synchronization instance settings
      

      Table 2 Task settings

      Parameter	Description
      Region	The region where your service is running. You can change the region.
      Task Name	The task name consists of 4 to 50 characters, starts with a letter, and can contain only letters (case-insensitive), digits, hyphens (-), and underscores (_).
      Description	The description consists of a maximum of 256 characters and cannot contain the following special characters: =<>&'\"

      Table 3 Synchronization instance settings

      Parameter	Description
      Data Flow	To the cloud
      Source DB Engine	Select PostgreSQL.
      Destination DB Engine	Select PostgreSQL.
      Network Type	Select a VPC network. Enabling SSL is recommended. It may slow down the synchronization by 20% to 30% but it ensures data security.
      Destination DB Instance	The PostgreSQL instance you purchased.
      Synchronization Type	Full+Incremental This synchronization mode allows you to synchronize data in real time. After a full synchronization initializes the destination database, an incremental synchronization parses logs to ensure data consistency between the source and destination databases. NOTE: If you select the Full+Incremental synchronization type, data generated during the full synchronization will be synchronized to the destination database with zero downtime, ensuring that both the source and destination databases remain accessible.

   4. On the Configure Source and Destination Databases page, wait until the synchronization instance is created. Then, specify source and destination database information. You are advised to click Test Connection for both the source and destination databases to check whether they have been connected to the synchronization instance. After the connection tests are successful, select the check box before the agreement and click Next.
      

      Source databases are classified into two types: self-built databases on ECSs and RDS DB instances. Configure parameters based on different scenarios.

      • Scenario 1: Self-built databases on ECS - source database configuration
        Figure 5 Self-build on ECS - source database information
        

        Table 4 Self-build on ECS - source database information

        Parameter	Description
        Source Database Type	Select Self-built on ECS.
        VPC	A dedicated virtual network in which the source database is located. It isolates networks for different services. You can select an existing VPC or create a VPC.
        Subnet	A subnet provides dedicated network resources that are logically isolated from other networks, improving network security. The subnet must be in the AZ where the source database resides. You need to enable DHCP for creating the source database subnet.
        IP Address or Domain Name	The IP address or domain name of the source database.
        Port	Enter an integer ranging from 1 to 65535, which indicates the port number of the source database.
        Database Username	A username for the source database.
        Database Password	The password for the database username.
        SSL Connection	To improve data security during synchronization over a public network, you are advised to enable SSL to encrypt synchronization links and upload a CA certificate.

      • Scenario 2: RDS DB instance - source database configuration
        Figure 6 RDS DB instance - source database information
        

        Table 5 RDS DB instance - source database information

        Parameter	Description
        Source Database Type	Select an RDS DB instance.
        DB Instance Name	Select the RDS PostgreSQL instance to be synchronized as the source DB instance.
        Database Username	A username for the source database.
        Database Password	The password for the database username.

      Figure 7 Destination database settings
      

      Table 6 Destination database settings

      Parameter	Description
      DB Instance Name	The RDS PostgreSQL instance you have selected during the synchronization instance creation is displayed by default and cannot be changed.
      Database Username	The username for accessing the destination PostgreSQL DB instance.
      Database Password	The password for the database username.

   5. On the Set Synchronization Task page, select the synchronization object and user.
      Figure 8 Synchronization mode
      

      Table 7 Synchronization object

      Parameter	Description
      Incremental Conflict Policy	The real-time synchronization function provides conflict policies for you to choose from if the synchronized data conflicts with existing data (such as the source and destination databases containing the same primary or unique keys) in the destination database. Select any of the following conflict policies: Ignore The system will skip the conflicting data and continue the subsequent synchronization process. Report error The synchronization task will be stopped and fail. Overwrite Conflicting data will be overwritten. In the following scenarios, you can select Ignore or Overwrite. In other scenarios, you are advised to select Report error. Data already exists in the destination database. Multiple source databases are synchronized to one destination database. Data in the destination database is updated manually.
      Synchronize	Available options: Index, Incremental DDLs, and Populate materialized views during the full synchronization phase Populate materialized views during the full synchronization phase: This option takes effect only for materialized views that was populated in the source database. This operation affects the full synchronization performance. You perform this operation after the full synchronization is complete.
      Synchronization Object	Objects can be synchronized at the database or table level. You can synchronize the entire database or some tables based on service requirements. For a single task, you can synchronize objects in only one database of an instance. Database name mapping is supported. Database-level synchronization synchronizes all objects in the source database to the destination database. Table-level synchronization synchronizes the selected table objects to the destination database. NOTE: If you select table-level synchronization, the selected table may have dependencies on other objects in the database. If the referenced objects are not selected and do not exist in the destination database, the task will fail. Ensure that all referenced objected are selected before synchronization or select database-level synchronization.
      Synchronize Account	During the synchronization, you can synchronize accounts based on your service requirements. There are two types of accounts: accounts that can be synchronized and accounts that cannot be synchronized. For accounts that cannot be synchronized, you can view details in the Remarks column and determine whether to synchronize accounts and permissions based on your service requirements.

   6. On the Check Task page, check the synchronization task.
      • If any check fails, review the cause and rectify the fault. After the fault is rectified, click Check Again.

        For details about how to handle check failures, see Checking Whether the Source Database Is Connected in Data Replication Service User Guide.

      • If all check items are successful, click Next.
        

        You can proceed to the next step only when all checks are successful. If there are any items that require confirmation, view and confirm the details first before proceeding to the next step.

   7. On the Confirm Task page, specify Start Time and click Next.
      

      • Set Start Time to Start upon task creation or Start at a specified time based on site requirements.
      • After a synchronization task is started, the performance of the source and destination databases may be affected. You are advised to start a synchronization task during off-peak hours.
   8. After the task is submitted, go back to the Data Synchronization Management page to view the task status.

2. Manage the migration task.
   The migration task contains two phases: full migration and incremental migration. You can manage them in different phases.

   • Full synchronization

     Viewing the synchronization progress: Click the target full synchronization task, and on the Migration Progress tab, you can see the synchronization progress of the structure, data, indexes, and synchronization objects. When the progress reaches 100%, the synchronization is complete.

   • Incremental synchronization
     • Viewing the synchronization delay: After the full synchronization is complete, an incremental synchronization starts. On the Data Synchronization Management page, click the target synchronization task. On the displayed page, click Synchronization Progress to view the synchronization delay of the incremental synchronization. If the synchronization delay is 0s, the destination database is being synchronized with the source database in real time. You can also view the data consistency on the Synchronization Comparison tab.
       Figure 9 Viewing the synchronization delay
       
     • Viewing the synchronization comparison results: To minimize service downtime, click the name of an incremental synchronization task. On the Synchronization Comparison page, create a comparison task.

       For details, see Comparing Migration Items in Data Replication Service User Guide.

3. Cut over services.

   You are advised to start the cutover process during off-peak hours. At least one complete data comparison is performed during off-peak hours. To obtain accurate comparison results, start data comparison at a specified time point during off-peak hours. If it is needed, select Start at a specified time for Comparison Time. Due to slight time difference and continuous operations on data, inconsistent comparison results may be generated, reducing the reliability and validity of the results.

   1. Interrupt services first. If the workload is not heavy, you may not need to interrupt the services.
   2. Run the following statement on the source database and check whether any new sessions execute SQL statements within the next 1 to 5 minutes. If there are no new statements executed, the service has been stopped.

      select * from pg_stat_activity;

      

      The process list queried by the preceding statement includes the connection of the DRS synchronization instance. If no additional session executes SQL statements, the service has been stopped.

   3. On the Synchronization Progress page, view the synchronization delay. When the delay is displayed as 0s and remains stable for a period, then you can perform a data-level comparison between the source and destination databases. For details about the time required, refer to the results of the previous comparison.
      • If there is enough time, compare all objects.
      • If there is not enough time, use the data-level comparison to compare the tables that are frequently used and that contain key business data or inconsistent data.
   4. Determine an appropriate time to cut the services over to the destination database. After services are restored and available, the synchronization is complete.

4. Complete the synchronization.
   1. Stop the synchronization task. After databases and services are synchronized to the destination database, to prevent operations on the source database from being synchronized to the destination database to overwrite data, you can stop the synchronization task. This operation only deletes the synchronization instance, and the synchronization task is still displayed in the task list. You can view or delete the task. You will not be charged for the synchronization task after the task is stopped.
   2. Delete the synchronization task. After the synchronization task is complete, you can delete it. After the synchronization task is deleted, it will not be displayed in the task list.