Updated on 2022-09-15 GMT+08:00

Creating and Mounting a File System

Scenarios

After the logical volume is created, you need to create a file system on the logical volume and mount the file system on the corresponding directory. This section shows how to create an ext4 file system on a logical volume and mount the file system on /Data1.

Procedure

  1. Log in to the ECS as user root.
  2. Run the following command to create a file system:

    mkfs.File system format Logical volume path

    In this example, run the following command:

    mkfs.ext4 /dev/vgdata/lvdata1

    Information similar to the following is displayed:

    [root@ecs-lvmtest ~]# mkfs.ext4 /dev/vgdata/lvdata1
    mke2fs 1.42.9 (28-Dec-2013)
    Filesystem label=
    OS type: Linux
    Block size=4096 (log=2)
    Fragment size=4096 (log=2)
    Stride=0 blocks, Stripe width=0 blocks
    983040 inodes, 3932160 blocks
    196608 blocks (5.00%) reserved for the super user
    First data block=0
    Maximum filesystem blocks=2151677952
    120 block groups
    32768 blocks per group, 32768 fragments per group
    8192 inodes per group
    Superblock backups stored on blocks:
            32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208
    
    Allocating group tables: done
    Writing inode tables: done
    Creating journal (32768 blocks): done
    Writing superblocks and filesystem accounting information: done
    

  3. Run the following command to create a mounting directory:

    mkdir Mounting directory

    In this example, run the following command:

    mkdir /Data1

  4. Run the following command to mount the file system on the directory:

    mount Logical volume path Mounting directory

    In this example, run the following command:

    mount /dev/vgdata/lvdata1 /Data1

  5. Run the following command to query the file system mounting information:

    mount | grep Mounting directory

    In this example, run the following command:

    mount | grep /Data1

    Information similar to the following is displayed:

    [root@ecs-lvmtest ~]# mount | grep /Data1
    /dev/mapper/vgdata-lvdata1 on /Data1 type ext4 (rw,relatime,data=ordered)

    In the command output, dev/mapper/vgdata-lvdata1 indicates the file system path. Take note of this path, which will be used in 6.

  6. Perform the following operations to enable automatic mounting of the file system at the system start:

    If this is not configured, you need to manually mount the file system every time the ECS is restarted.
    1. Run the following command to query the file system UUID:

      blkid File system path

      In this example, run the following command to query the UUID of dev/mapper/vgdata-lvdata1:

      blkid /dev/mapper/vgdata-lvdata1

      Information similar to the following is displayed:

      [root@ecs-lvmtest ~]# blkid /dev/mapper/vgdata-lvdata1
      /dev/mapper/vgdata-lvdata1: UUID="c6a243ce-5150-41ac-8816-39db54d1a4b8" TYPE="ext4"

      In the command output, the UUID is c6a243ce-5150-41ac-8816-39db54d1a4b8.

    2. Run the following command to open the /etc/fstab file:

      vi /etc/fstab

      Information similar to the following is displayed:
      [root@ecs-lvmtest ~]# vi /etc/fstab
      
      #
      # /etc/fstab
      # Created by anaconda on Tue Nov  7 14:28:26 2017
      #
      # Accessible filesystems, by reference, are maintained under '/dev/disk'
      # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
      #
      UUID=27f9be47-838b-4155-b20b-e4c5e013cdf3 /                       ext4    defaults        1 1
      UUID=2b2000b1-f926-4b6b-ade8-695ee244a901 /boot                   ext4    defaults        1 2
    3. Press i to enter editing mode.
    4. Move the cursor to the end of the file and press Enter. Then add the following information:
      UUID=c6a243ce-5150-41ac-8816-39db54d1a4b8 /Data1                  ext4    defaults        0 0

      The file content is described as follows:

      • Column 1: indicates the UUID. Enter the UUID queried in 1.
      • Column 2: indicates the file system's mounting directory. Enter mounting directory /Data1 created in 3.
      • Column 3: indicates the file system format. Enter file system format ext4 configured in 2.
      • Column 4: indicates the mounting option. In this example, defaults is used.
      • Column 5: indicates the backup option. Enter either 1 (the system automatically backs up the file system) or 0 (does not back up the file system). In this example, 0 is used.
      • Column 6: indicates the scanning option. Enter either 1 (the system automatically scans the file system at system start) or 0 (does not scan the file system). In this example, 0 is used.
    5. Press Esc, enter :wq!, and press Enter.

      The system saves the modifications and exits the vi editor.

  7. Perform the following operations to verify automatic mounting:

    1. Run the following command to unmount a file system:

      umount Logical volume path

      In this example, run the following command:

      umount /dev/vgdata/lvdata1

    2. Run the following command to reload all the content in the /etc/fstab file:

      mount -a

    3. Run the following command to query the file system mounting information:

      mount | grep Mounting directory

      In this example, run the following command:

      mount | grep /Data1

      If information similar to the following is displayed, the automatic mounting function takes effect:

      [root@ecs-lvmtest ~]# mount | grep /Data1
      /dev/mapper/vgdata-lvdata1 on /Data1 type ext4 (rw,relatime,data=ordered)