Help Center> Cloud Bastion Host> User Guide> System> Sysconfig> Outgoing> Configuring the SNMP Agent
View PDF

Configuring the SNMP Agent

CBH supports Simple Network Management Protocol (SNMP) v2c and v3.

After the configuration is complete, run related commands on the SNMP client or MAC terminal to obtain the object identifier (OID) of the system.

This topic describes how to configure the system SNMP Agent and how to view the system OID information table.

Prerequisites

You have the management permissions for the System module.

Procedure

  1. Log in to the CBH system.
  2. Choose System > Sysconfig > Outgoing.

    Figure 1 Outgoing

  3. In the SNMP Agent area, click Edit.

    • The SNMP agent is disabled by default.
    • Select SNMP v2c or SNMP v3 and set related parameters as prompted.
      Figure 2 SNMP v2c
      Figure 3 SNMP v3

  4. Click OK. You can then view SNMP agent configuration on the Outgoing tab.

    Click OID table to obtain the OIDs of the related system information.

    Figure 4 OID table

Parent topic: Outgoing