错误码
状态码 |
错误码 |
错误信息 |
描述 |
处理措施 |
---|---|---|---|---|
500 |
IoTFM.000001 |
Internal server error. |
服务器内部错误。 |
请联系设施云工程师分析解决。 |
401 |
IoTFM.000002 |
The request is unauthorized. |
请求非法。 |
请排查请求中的鉴权参数是否携带正确。 |
405 |
IoTFM.000003 |
The method is not supported. |
不支持该方法。 |
请排查请求方式是否与文档中的保持一致 |
403 |
IoTFM.000004 |
Invalid access token. |
访问令牌无效。 |
请排查请求中的token是否正常。 |
403 |
IoTFM.000005 |
Refresh access token failed. |
刷新访问令牌失败。 |
请排查请求中的refreshToken是否正确。 |
400 |
IoTFM.000006 |
Invalid input data. |
输入数据无效。 |
请排查请求参数中是否符合设施云对应接口文档要求。 |
500 |
IoTFM.000007 |
The data in database is abnormal. |
数据库数据异常。 |
请联系设施云工程师分析解决。 |
400 |
IoTFM.000008 |
Invalid input. Bad request, for more detail, refer to the error message. |
输入无效。错误的请求,有关详细信息,请参阅错误消息。 |
请排查该请求的请求格式是否正确。 |
400 |
IoTFM.000009 |
Invalid input. Invalid time format. |
输入无效。时间格式无效。 |
请排查请求参数中中时间的格式是否与对应接口文档中的保持一致。 |
400 |
IoTFM.000010 |
Invalid input. The start time must be earlier than the end time. |
输入无效。开始时间必须早于结束时间。 |
请求中开始时间必须早于结束时间。 |
400 |
IoTFM.000011 |
Invalid input. The specified parameter 'pageNo' is out of range. |
输入无效。指定的参数pageNo超出范围。 |
请排查请求参数中的pageNo大小是否在对应接口文档限制范围之内。 |
400 |
IoTFM.000012 |
Invalid input. The specified parameter 'pageSize' is out of range. |
输入无效。指定的参数pageSize超出范围。 |
请排查请求参数中的pageSize大小是否在对应接口文档限制范围之内。 |
400 |
IoTFM.000013 |
Invalid input. The parameter 'pageSize' multiply 'pageNo' exceeds the upper limit. |
输入无效。参数pageSize乘pageNo超过上限。 |
请检查pageSize和pageNo参数的大小。 |
400 |
IoTFM.000014 |
Invalid input. The specified parameter 'nextToken' is out of range. |
输入无效。指定的参数nextToken超出范围。 |
请排查请求中的nextToken参数是否在对应接口文档的限制范围之内。 |
403 |
IoTFM.000015 |
The account is frozen. |
账户被冻结。 |
联系账户负责人进行解冻。 |
404 |
IoTFM.000016 |
Target not found. |
找不到目标。 |
请联系设施云工程师分析解决。 |
400 |
IoTFM.000017 |
Invalid input. The specified parameter 'limit' is out of range. |
输入无效。指定的参数limit超出范围。 |
请排查请求中的limit参数是否在对应接口文档的限制范围之内。 |
400 |
IoTFM.000018 |
Invalid input. The specified parameter 'marker' is out of range. |
输入无效。指定的参数标记超出范围。 |
请排查请求中的marker参数是否在对应接口文档的限制范围之内。 |
405 |
IoTFM.000019 |
Method not allowed. |
不允许该方法。 |
请排查请求方式是否与文档中的保持一致 |
500 |
IoTFM.000020 |
Decrypt IAM token failed. |
解密IAM令牌失败。 |
请联系设施云工程师分析解决。 |
403 |
IoTFM.000021 |
Operation not allowed. User not found by IAM token or the authorized user has not subscribed IOTDA service. |
不允许操作。IAM令牌找不到用户或授权用户未订购IOTDA服务。 |
请排查IAM Token所在用户是否订阅了设备接入服务(IOTDA)。 |
403 |
IoTFM.000022 |
Operation not allowed. The user does not have the permission. |
不允许操作。用户没有权限。 |
请排查该用户是否有权限访问。 |
403 |
IoTFM.000023 |
Request reached the maximum rate limit. |
请求达到最大速率限制值,限制为limit。 |
请降低请求频率,该请求速率已达到限制。 |
400 |
IoTFM.000030 |
Failed to register the resource in Stage. Please try again later. |
在阶段注册资源失败。请稍后再试。 |
请稍后重试。 |
400 |
IoTFM.000031 |
Failed to unRegister the resource in Stage. Please try again later. |
在阶段取消注册资源失败。请稍后再试。 |
请稍后重试。 |
400 |
IoTFM.000032 |
Failed to update the resource in Stage. Please try again later. |
更新阶段中的资源失败。请稍后再试。 |
请稍后重试。 |
400 |
IoTFM.000033 |
Subscribed project number exceed the limit. |
订阅的项目编号超过限制limit。 |
请排查请求的limit参数是否在对应接口文档的限制范围之内 |
400 |
IoTFM.000500 |
Throw exception when operate in IoTDA platform. |
在IoTDA平台上运行时抛出异常。错误码是:ext_error_code,错误信息是:ext_error_msg |
请排查请求参数是否符合设施云文档要求。 |
400 |
IoTFM.000501 |
Throw exception when operate in IVM platform. |
在IVM平台上运行时抛出异常。错误码是:ext_error_code,错误信息是:ext_error_msg |
请排查请求参数是否符合设施云文档要求。 |
400 |
IoTFM.000502 |
Throw exception when operate in closeli platform. |
在closeli平台上运行时抛出异常。错误码是:ext_error_code,错误信息是:ext_error_msg |
请排查请求参数是否符合设施云文档要求。 |
400 |
IoTFM.000503 |
Throw exception when operate in UEM platform. |
在UEM平台上运行时抛出异常。错误码是:ext_error_code,错误信息是:ext_error_msg |
请排查请求参数是否符合设施云文档要求。 |
400 |
IoTFM.000504 |
Throw exception when operate in IoTEdge platform. |
在IoTEdge平台上运行时抛出异常。错误码是:ext_error_code,错误信息是:ext_error_msg |
请排查请求参数是否符合设施云文档要求。 |
400 |
IoTFM.000505 |
Throw exception when operate in 智能设施云平台DE platform. |
在IoTCDE平台中操作时抛出异常。错误码是:ext_error_code,错误信息是:ext_error_msg |
请排查请求参数是否符合设施云文档要求。 |
400 |
IoTFM.001000 |
Throw exception when auth with Common platform. |
使用Common平台进行身份验证时引发异常。 |
请排查身份验证的请求参数是否符合设施云文档要求。 |
400 |
IoTFM.001001 |
Param instanceId is required when checking permission. |
进行身份验证时需要参数instanceId。 |
请排查请求参数中instanceId是否符合设施云文档要求。 |
400 |
IoTFM.001002 |
Param instanceId is invalid when checking permission. |
进行身份验证时,参数instanceId无效。 |
请排查请求参数中instanceId是否符合设施云文档要求。 |
403 |
IoTFM.001003 |
Instance is inaccessible when checking permission. |
进行身份验证时,instanceId无法访问。 |
请排查请求参数是否符合设施云文档要求。 |
403 |
IoTFM.001004 |
Policy doesn't allow action to be performed. |
策略不允许执行操作。 |
请联系设施云工程师分析解决。 |
403 |
IoTFM.001005 |
No permissions to request the method. |
没有请求该方法的权限。 |
请联系权限维护人员处理。 |
403 |
IoTFM.001006 |
IAM auth param not found. |
未找到IAM身份验证参数。 |
请排查请求参数是否正确。 |
403 |
IoTFM.001007 |
Invalid IAM authentication parameters. |
IAM身份验证参数无效。 |
请排查请求参数是否正确。 |
403 |
IoTFM.001008 |
Project is not allowed to access. |
项目不允许访问。 |
请排查请求参数是否正确。 |
403 |
IoTFM.001009 |
The X-Root-Zone-Id request header is missing. |
缺少X-Root-Zone-Id请求头。 |
请排查请求参数是否正确。 |
500 |
IoTFM.001050 |
IAM internal error occurred. |
IAM 内部发生错误。 |
请联系IAM平台维护人员处理。 |
400 |
IoTFM.001051 |
Username and password not matched. |
用户名和密码不匹配。 |
请排查请求参数中用户名与密码是否符合设施云文档要求 |
404 |
IoTFM.001052 |
User not exist. |
用户不存在。 |
请排查请求参数中用户是否正确。 |
403 |
IoTFM.001053 |
Not allow to delete self. |
不允许删除自身。 |
不允许删除自身。 |
400 |
IoTFM.001054 |
Not allow to set weak password. |
不允许设置弱密码。 |
请设置强密码。 |
400 |
IoTFM.001055 |
The new password is the same as the original password. |
新密码与原密码相同。 |
新密码与原密码不能相同 |
403 |
IoTFM.001056 |
Not allow to delete the default user. |
不允许删除默认用户。 |
不允许删除默认用户。 |
400 |
IoTFM.001057 |
Username is already exist. |
用户名已存在。 |
请更换用户名后重试。 |
400 |
IoTFM.001058 |
Not allow to create op user. |
不允许创建op用户。 |
不允许创建op用户。 |
403 |
IoTFM.001059 |
User is disabled by admin. |
用户已被管理员禁用。 |
请联系管理员解除禁用。 |
401 |
IoTFM.001060 |
Token has been revoked. |
令牌已被吊销。 |
请使用可用的令牌。 |
400 |
IoTFM.001061 |
User has been locked. |
用户已被锁定。 |
请联系管理员解除锁定。 |
404 |
IoTFM.001062 |
Role is not exist. |
角色不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001063 |
Not allow to operate system role. |
不允许使用操作系统角色。 |
不允许使用操作系统角色。 |
403 |
IoTFM.001064 |
User is forbidden by acl. |
用户被acl禁止。 |
请联系管理员解除禁用。 |
400 |
IoTFM.001065 |
Role is already exist. |
角色已存在。 |
请更换角色名后重试。 |
400 |
IoTFM.001066 |
Role to delete is bounded with user |
要删除的角色与用户绑定。 |
如需删除,请解除与用户的绑定。 |
400 |
IoTFM.001067 |
The domain user limit has been reached. |
已达到域用户限制。 |
请删除废弃用户后重试。 |
400 |
IoTFM.001068 |
The domain role limit has been reached. |
已达到域角色限制。 |
请删除废弃角色后重试。 |
403 |
IoTFM.001069 |
Accounts that have been provisioned to nodes cannot be deleted. |
已发放到节点的帐户不能删除。 |
请将此节点改为未发放后重试。 |
400 |
IoTFM.001070 |
Account which synced from other instance can not be update password locally. |
从其他实例同步的帐户不能在本地更新密码。 |
请先更新密码,再从其他实例同步过来。 |
400 |
IoTFM.001071 |
User-phone is already exist. |
用户电话已存在。 |
请更换用户电话后重试。 |
400 |
IoTFM.001072 |
Both of email and phone cannot be empty at the same time. |
电子邮件和电话不能同时为空。 |
请排查请求参数中电子邮件和电话是否同时为空。 |
403 |
IoTFM.001073 |
Password has been expired, please update password. |
密码已过期,请更新密码。 |
请更新用户的密码。 |
400 |
IoTFM.001074 |
Operation failed. The number of roles has reached the upper limit. |
操作失败。角色数量已达到上限。 |
请删除废弃角色后重试。 |
401 |
IoTFM.001080 |
SSO app session has expired. |
SSO应用会话已过期。 |
请重新创建会话后重试。 |
403 |
IoTFM.001081 |
The number of instances has reached the upper limit. |
实例数量已达到上限。 |
请排查实例数量是否正确。 |
403 |
IoTFM.001101 |
Organization is not exist. |
组织不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001102 |
Parent organization is not exist. |
父组织不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001103 |
Organization name is already exist. |
组织名称已存在。 |
请更换组织名称后重试。 |
400 |
IoTFM.001104 |
Required definitions is not filling with values. |
必填参数未填写。参数为keys。 |
请排查请求参数中keys是否正确。 |
400 |
IoTFM.001105 |
Definition value validation of definitions is invalid. |
参数验证无效。参数为keys。 |
请排查请求参数中keys是否正确 |
400 |
IoTFM.001106 |
Definition validation of definitions is invalid. |
参数验证无效。参数为keys。 |
请排查请求参数中keys是否正确 |
400 |
IoTFM.001107 |
One organization associating zone count exceeded the limit. |
组织关联的空间数量超出限制,数量为count,限制为limit。 |
请排查请求参数是否符合设施云文档要求。 |
400 |
IoTFM.001108 |
Zone to associate is already associated by other organization. |
要关联的空间已被其他组织关联。 |
请更换空间后重试。 |
400 |
IoTFM.001109 |
Organization with children organization is not deletable. |
具有子级的组织不可删除。 |
先删除组织下的子组织,再去删除该组织。 |
400 |
IoTFM.001110 |
Organization definition code is not exist. |
组织定义代码不存在。 |
请排查请求参数中组织定义代码是否正确。 |
400 |
IoTFM.001111 |
Depth of organization exceeds the limit. |
组织深度超过限制。深度是depth,限制是limit。 |
请排查请求参数中组织深度是否正确。 |
400 |
IoTFM.001112 |
Organizations associated with regions cannot be deleted. |
与空间关联的组织不可删除。 |
请排查请求参数中组织是否关联空间。 |
400 |
IoTFM.001113 |
The region associated with the device cannot be deleted. |
与设备关联的空间不可删除。 |
请排查请求参数中空间是否关联设备。 |
400 |
IoTFM.001114 |
The area associated with the configuration cannot be deleted. |
与组态关联的空间不可删除。 |
请排查请求参数中空间是否关联组态。 |
400 |
IoTFM.001115 |
The organization has been associated with a project and cannot be deleted. |
该组织已与项目关联,不可删除。 |
请排查请求参数中组织是否关联项目。 |
400 |
IoTFM.001116 |
The organization has been associated with a user and cannot be deleted. |
该组织已与用户关联,不可删除。 |
请排查请求参数中组织是否关联用户。 |
403 |
IoTFM.001200 |
Zone is not exist. |
空间不存在。 |
请排查请求参数中空间是否正确。 |
400 |
IoTFM.001201 |
Parent Zone is not exist. |
父空间不存在。 |
请排查请求参数中父空间是否正确。 |
400 |
IoTFM.001202 |
Zone name is already exist. |
空间名称已存在。 |
请更换空间名称后重试。 |
400 |
IoTFM.001203 |
Zone definition code is not exist. |
空间定义代码不存在。 |
请排查请求参数中空间定义代码是否正确。 |
400 |
IoTFM.001204 |
Failed to delete the area because it contains sub-areas. |
空间下存在子级空间,无法删除。 |
请排查请求参数中下是否存在子级空间。 |
400 |
IoTFM.001205 |
The area depth exceeds the limit. |
空间深度超过限制。 |
请排查请求参数中空间深度是否正确。 |
400 |
IoTFM.001208 |
The number of region specification attributes exceeds the upper limit. |
空间规格属性数量超过限制。 |
请排查请求参数中空间规格属性数量是否超过限制。 |
400 |
IoTFM.001209 |
The number of region specifications exceeds the upper limit. |
空间规格数量超过限制。 |
请排查请求参数中空间规格数量是否超过限制。 |
400 |
IoTFM.001210 |
The region specification name already exists. |
空间规格名称已存在。 |
请排查请求参数中空间规格名称是否已存在。 |
400 |
IoTFM.001211 |
The region specification code already exists. |
空间规格编码已存在。 |
请排查请求参数中空间规格编码是否已存在。 |
400 |
IoTFM.001212 |
The region specification is being used. Editing/deleting is not allowed. |
该空间规格正在被占用。不允许编辑/删除! |
请排查请求参数中空间规格是否正在被占用。 |
400 |
IoTFM.001213 |
The area code already exists. |
空间编码已存在。 |
请排查请求参数中空间编码是否已存在。 |
400 |
IoTFM.001214 |
The city code of the area does not exist. |
该空间的城市代码不存在。 |
请排查请求参数中该空间的城市代码是否存在。 |
400 |
IoTFM.001215 |
Region Parent ID or Code must be at least mandatory. |
空间父ID或代码至少必须为必填项。 |
请排查请求参数中空间父ID或代码是否填写。 |
400 |
IoTFM.001216 |
The locale attribute should be empty because the attribute belonging to the definition code is empty. |
空间属性应为空,因为属于定义代码的属性为空。 |
请排查请求参数中空间属性是否为空。 |
400 |
IoTFM.001217 |
The region specification attribute name must be unique. |
空间规格属性名称不应重复。 |
请排查请求参数中空间规格属性名称是否重复。 |
400 |
IoTFM.001218 |
The area specification attribute code should not be duplicated. |
空间规格属性代码不应重复。 |
请排查请求参数中空间规格属性代码是否重复。 |
400 |
IoTFM.001219 |
The default value for the zone specification attribute is invalid. |
空间规格属性的默认值无效。 |
请排查请求参数中空间规格属性的默认值是否有效。 |
400 |
IoTFM.001220 |
When a device is created, the region ID and region code are missing. |
创建设备时,缺少空间ID和空间编码。 |
请排查请求参数中是否缺少空间ID和空间编码。 |
400 |
IoTFM.001221 |
The total number of regions exceeds the limit. |
空间总数超过限制。 |
请排查请求参数中空间总数是否超过限制。 |
400 |
IoTFM.001222 |
The number of items exceeds the limit. |
项目数量超出限制。 |
请排查请求参数中项目数量是否超出限制。 |
400 |
IoTFM.001223 |
Project does not exist. |
项目不存在。 |
请排查请求参数中项目是否存在。 |
400 |
IoTFM.001224 |
A project that has sub-regions cannot be deleted. |
存在子空间的项目不能被删除。 |
请排查请求参数中项目是否存在子空间。 |
400 |
IoTFM.001225 |
Project already exists. |
项目已存在。 |
请排查请求参数中项目是否已存在。 |
400 |
IoTFM.001226 |
The project name already exists. |
项目名称已存在。 |
请排查请求参数中项目名称是否存在。 |
400 |
IoTFM.001227 |
The item does not match the subspace. |
该项目与子空间不匹配。 |
请排查请求参数中项目与子空间是否匹配。 |
400 |
IoTFM.001228 |
The space ID does not match the space code. |
空间ID与空间编码不匹配。 |
请排查请求参数中项目是否存在。 |
400 |
IoTFM.000104 |
Zone with children zone is not deletable. |
具有子级的空间不可删除。 |
先删除空间下的子空间,再去删除该空间。 |
400 |
IoTFM.000105 |
Depth of zone exceeds the limit. |
空间深度超过限制。深度是depth,限制是limit。 |
请排查请求参数中空间深度是否正确。 |
400 |
IoTFM.000106 |
Zone to be associated is not top-level node. |
要关联的空间不是顶级节点。 |
要关联的空间不是顶级节点。 |
400 |
IoTFM.000107 |
The region definition code does not match. |
空间定义编码不匹配。 |
请排查请求参数中空间定义编码是否正确。 |
400 |
IoTFM.001300 |
The product category code has been exist. |
产品分类编码已存在。 |
请更换产品分类编码后重试。 |
400 |
IoTFM.001301 |
The product category id has been exist. |
产品分类ID已存在。 |
请更换产品分类ID后重试。 |
400 |
IoTFM.001302 |
The parent product category id does not exist. |
父产品分类ID不存在。 |
请排查请求参数中父产品分类ID是否正确。 |
400 |
IoTFM.001303 |
The product category id does not exist. |
产品分类ID不存在。 |
请排查请求参数中产品分类ID是否正确。 |
400 |
IoTFM.001304 |
The product category to be deleted is super category of other categories, all sub categories must be deleted before delete this category. |
要删除的产品分类是其他类别的父产品分类,删除此类别前必须删除所有子类别。 |
要删除的产品分类是其他类别的父产品分类,删除此类别前必须删除所有子类别。 |
400 |
IoTFM.001305 |
The product category to be deleted has been used by products, all products must be deleted before delete this category. |
要删除的产品分类已被产品使用,删除该类别前必须删除所有产品。 |
要删除的产品分类已被产品使用,删除该类别前必须删除所有产品。 |
400 |
IoTFM.001306 |
The product category code does not exist. |
产品分类编码不存在。 |
请排查请求参数中产品分类编码是否正确。 |
400 |
IoTFM.001307 |
The item does not match the subspace. |
该项目与子空间不匹配。 |
请排查请求参数中项目与子空间是否匹配。 |
400 |
IoTFM.001308 |
The space ID does not match the space code. |
空间ID与空间编码不匹配。 |
请排查请求参数中空间ID与空间编码是否匹配。 |
400 |
IoTFM.001350 |
The product to be deleted has been used in devices, all devices must be deleted before delete this product. |
待删除的产品已在设备中使用,删除该产品前必须删除所有设备。 |
待删除的产品已在设备中使用,删除该产品前必须删除所有设备。 |
400 |
IoTFM.001351 |
The product name is already exist. |
产品名称已存在。 |
请更换产品名称后重试。 |
400 |
IoTFM.001352 |
The product id is already exist. |
产品ID已存在。 |
请更换产品ID后重试。 |
400 |
IoTFM.001353 |
The product code is already exist. |
产品编码已存在。 |
请更换产品编码后重试。 |
400 |
IoTFM.001354 |
The product short code is already exist. |
产品短编码已存在。 |
请更换产品短编码后重试。 |
400 |
IoTFM.001355 |
The product id is not exist. |
产品ID不存在。 |
请排查请求参数中产品ID是否正确。 |
400 |
IoTFM.001356 |
The length of the service capabilities array in the product exceeds the limit. |
产品中服务数组长度超过限制,限制是limit。 |
请排查请求参数中产品中服务数组长度是否正确。 |
400 |
IoTFM.001357 |
The size of the service capabilities content in the product exceeds the limit. |
产品中的服务内容大小超过限制,限制是limit。 |
请排查请求参数中产品中服务内容大小是否正确。 |
400 |
IoTFM.001358 |
Duplicate service id in the service capabilities. |
服务ID重复,id是service_id。 |
请更换服务ID后重试。 |
400 |
IoTFM.001359 |
The length of the service properties array in the service capability exceeds the limit. |
产品中业务属性数组长度超限,限制是limit。 |
请排查请求参数中产品中业务属性数组长度是否正确。 |
400 |
IoTFM.001360 |
Duplicate property code in the service capability. |
服务中的属性编码重复,服务id是service_id,属性编码是attribute_code。 |
请更换属性编码后重试。 |
400 |
IoTFM.001361 |
The length of the service command array in the service capability exceeds the limit. |
产品中业务命令数组长度超限,限制是limit。 |
请排查请求参数中产品中业务命令数组长度是否正确。 |
400 |
IoTFM.001362 |
Duplicate command code in the service capability. |
服务中的命令编码重复,服务id是service_id,命令编码是command_code。 |
请更换命令编码后重试。 |
400 |
IoTFM.001363 |
The length of the def properties array in the product exceeds the limit. |
产品中的def属性数组的长度超过了限制。长度是length,限制是limit。 |
请排查请求参数中产品中的def属性数组的长度是否正确。 |
400 |
IoTFM.001364 |
The size of the def properties content in the product exceeds the limit. |
产品中的定义属性内容的大小超过了限制。长度是length,限制是limit。 |
请排查请求参数中产品中的定义属性内容的大小是否正确。 |
400 |
IoTFM.001365 |
Duplicate def property code in the def properties. |
定义属性代码重复。 |
请更换定义属性代码后重试。 |
400 |
IoTFM.001366 |
The service id is not exist in the service capabilities. |
服务ID不存在。id是service_id。 |
请排查请求参数中产品中服务ID是否正确。 |
400 |
IoTFM.001367 |
The property code is not exist in the service capabilities. |
属性编码不存在。属性编码是property_code。 |
请排查请求参数中产品中属性编码是否正确。 |
400 |
IoTFM.001368 |
Duplicate enum value in the enum list of the service property. |
属性枚举值重复。枚举值是enum_value。 |
请更换属性枚举值后重试。 |
400 |
IoTFM.001369 |
Duplicate enum value in the enum list of the def property. |
规格属性中枚举值重复。枚举值是enum_value。 |
请更换规格属性中枚举值后重试。 |
400 |
IoTFM.001370 |
The service ID does not exist in the service definition. |
服务定义中serviceId不存在。 |
请排查请求参数中服务定义中serviceId是否存在。 |
400 |
IoTFM.001371 |
The serviceId in the command definition does not exist. |
命令定义中serviceId不存在。 |
请排查请求参数中命令定义中serviceId是否存在。 |
400 |
IoTFM.001372 |
The length of the event array in the model definition exceeds the limit. |
模型定义中事件数组长度超过限制。 |
请排查请求参数中事件数组长度是否超过限制。 |
400 |
IoTFM.001373 |
The event type in the model definition is duplicate. |
模型定义中的事件类型重复。 |
请排查请求参数中事件类型是否重复。 |
400 |
IoTFM.001374 |
The built-in product cannot be modified. |
系统内置产品不允许修改。 |
请排查请求参数中产品是否系统内置产品。 |
400 |
IoTFM.001375 |
System built-in products cannot be deleted. |
系统内置产品不允许删除。 |
请排查请求参数中产品是否系统内置产品。 |
400 |
IoTFM.001376 |
Invalid default value for product attribute. |
产品属性的默认值无效。 |
请排查请求参数中产品属性的默认值是否有效。 |
400 |
IoTFM.001381 |
A maximum of one product can be imported at a time. |
每次导入产品的个数最多为1。 |
请排查请求参数中导入产品的个数是否为1。 |
400 |
IoTFM.001400 |
The device id has been exist. |
设备ID已存在。 |
请更换设备ID后重试。 |
400 |
IoTFM.001401 |
The node id has been exist. |
设备标识码已存在。 |
请更换设备标识码后重试。 |
400 |
IoTFM.001402 |
The device id is not exist. |
设备ID不存在。 |
请排查请求参数中设备ID是否正确。 |
400 |
IoTFM.001403 |
The parent device id is not exist. |
父设备ID不存在。 |
请排查请求参数中父设备ID是否正确。 |
400 |
IoTFM.001404 |
The depth of this device has reached the limit. |
此设备的深度已达到限制。深度是depth,限制是limit |
请排查请求参数中设备的深度是否正确。 |
400 |
IoTFM.001405 |
The device to be deleted is parent device of other devices, all sub devices must be deleted before delete this device. |
要删除的设备是其他设备的父设备,删除此设备之前必须删除所有子设备。 |
要删除的设备是其他设备的父设备,删除此设备之前必须删除所有子设备。 |
403 |
IoTFM.001406 |
Operation not allowed. The device is not online. |
设备未在线,该操作不允许。 |
请检查设备是否在线。 |
400 |
IoTFM.001407 |
The length of the spec properties array in the device exceeds the limit. |
设备规格属性数组的长度超过限制。长度是length,限制是limit。 |
请排查请求参数中设备规格属性数组的长度是否正确。 |
400 |
IoTFM.001408 |
The size of the spec properties content in the device exceeds the limit. |
设备规格属性内容的大小超过了限制。大小是size,限制是limit。 |
请排查请求参数中设备规格属性内容的大小是否正确。 |
400 |
IoTFM.001409 |
Duplicate spec property code in the spec properties. |
规格属性中的属性编码重复。属性编码是property_code。 |
请更换属性编码后重试。 |
400 |
IoTFM.001410 |
The property code is not exist in the def properties. |
规格属性中不存在该属性编码。属性编码是property_code。 |
请排查请求参数中属性编码是否正确。 |
400 |
IoTFM.001411 |
The property value is not exist in the enum list of the def property. |
属性值不存在枚举列表中。属性值是property_value。 |
请排查请求参数中属性值是否正确。 |
400 |
IoTFM.001412 |
The policy ID does not exist in the device attributes. |
设备属性中策略ID不存在。 |
请排查请求参数中策略ID是否存在。 |
400 |
IoTFM.001413 |
The policy name does not exist in the device attributes. |
设备属性中策略名称不存在。 |
请排查请求参数中策略名称是否存在。 |
400 |
IoTFM.001414 |
The policy already exists in the device properties. |
设备属性中已存在该策略。 |
请排查请求参数中策略是否已存在。 |
400 |
IoTFM.001415 |
The size of the attribute policy item exceeds the limit. |
属性策略项的大小超过限制。 |
请排查请求参数中属性策略项的大小是否超过限制。 |
400 |
IoTFM.001419 |
The device has been associated with other devices. Go to the device details page to delete all associations. |
该设备已关联其他设备,请先前往设备详情页删除所有关联关系。 |
请排查请求参数中设备是否关联其他设备。 |
400 |
IoTFM.001420 |
The device has been associated with another device. Go to the associated device details page to delete all associations. |
该设备已被其他设备关联,请先前往关联设备的详情页删除所有关联关系。 |
请排查请求参数中设备是否关联其他设备。 |
408 |
IoTFM.001421 |
Set properties timed out. Check whether the device returns a response within the specified time after receiving the request. |
设置属性超时。检查设备收到请求后是否在指定时间内返回响应。 |
设置属性超时。检查设备收到请求后是否在指定时间内返回响应。 |
400 |
IoTFM.001422 |
The command code and service id is not exist in service capabilities. |
命令编码和服务ID不存在。 |
请排查请求参数中命令编码和服务ID是否正确。 |
408 |
IoTFM.001423 |
create command timed out. Check whether the device returns a response within the specified time after receiving the request. |
创建命令超时。检查设备收到请求后是否在指定的时间内返回响应。 |
创建命令超时。检查设备收到请求后是否在指定的时间内返回响应。 |
400 |
IoTFM.001426 |
The device shadow is not supported. |
不支持设备影子。 |
不支持设备影子。 |
400 |
IoTFM.001500 |
The operation is not supported in 3rd platform. |
第三方平台platform不支持该操作。 |
请稍后重试。 |
400 |
IoTFM.001501 |
Device channel is not exist. |
设备通道不存在。 |
请排查请求参数中设备通道是否正确。 |
400 |
IoTFM.001502 |
X-Ivm-Signature is invalid. |
X-Ivm-Signature非法。 |
请排查该请求的请求格式是否正确。 |
400 |
IoTFM.001503 |
Device doesn't exist in 3rd platform. |
第三方平台platform不存在该设备ID device_id。 |
请排查请求参数中设备ID是否正确。 |
400 |
IoTFM.001550 |
Policy name is already exist |
策略名称已存在。 |
请更换策略名称后重试。 |
400 |
IoTFM.001551 |
Policy type is not exist |
策略类型不存在。 |
请排查请求参数中策略类型是否正确。 |
400 |
IoTFM.001552 |
At least one policy must be configured |
至少需要输入一个配置项。 |
请排查请求参数中配置项是否正确。 |
400 |
IoTFM.001553 |
Policy is not exist. |
策略不存在。 |
请排查请求参数中策略是否正确。 |
500 |
IoTFM.001554 |
Failed to edit the policy in the uem. |
无法在UEM平台中编辑该策略。 |
无法在UEM平台中编辑该策略 |
400 |
IoTFM.001555 |
Publish scope cannot be empty. |
发布范围不能为空。 |
请排查请求参数中发布范围是否正确。 |
400 |
IoTFM.001557 |
No device is available in the selected organization or zone. |
所选空间或组织无可用设备。 |
请更换有可用设备的空间或组织后重试。 |
400 |
IoTFM.001558 |
The Publish scope cannot contain any two types of devices, zones, organizations. |
发布范围不能包含任何两种类型的设备、空间、组织。 |
请排查请求参数中发布范围是否正确。 |
400 |
IoTFM.001559 |
Disabling the delivery of a disabled policy. |
策略名称已存在。 |
请排查请求参数中策略名称是否正确。 |
400 |
IoTFM.001560 |
The policy content does not match the policy type. |
策略内容与策略类型不匹配。 |
请排查请求参数中策略内容与策略类型是否正确。 |
400 |
IoTFM.001561 |
The device does not support policy delivery. |
设备不支持策略下发。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001600 |
The rule id is not exist. |
规则ID不存在。 |
请排查请求参数中规则ID是否正确。 |
400 |
IoTFM.001601 |
The rule with same resource and event already exist. |
此规则ID已存在相同的数据来源和触发事件,规则ID是rule_id。 |
请更换规则ID后重试。 |
403 |
IoTFM.001602 |
Rule count exceed the limit of system. |
规则数量超过系统上限。 |
请排查请求参数中规则数量是否正确。 |
400 |
IoTFM.001603 |
The resource and event in rule is invalid. |
数据来源和触发事件无效。 |
请排查请求参数中数据来源和触发事件是否正确。 |
403 |
IoTFM.001604 |
The rule cannot be deleted because actions exist in the rule. |
已存在转发目标的规则不允许删除。 |
请排查请求参数中数据来源和触发事件是否正确。 |
403 |
IoTFM.001605 |
The rule has no action and cannot be enabled. |
当前规则没有设置转发目标,无法激活。 |
请排查请求参数中规则是否正确。 |
403 |
IoTFM.001606 |
Rule count exceed the limit of instance. |
规则数量已超过当前实例上限。 |
请排查请求参数中规则数量是否正确。 |
400 |
IoTFM.001615 |
The action id is not exist. |
转发目标ID无效。 |
请排查请求参数中转发目标ID是否正确。 |
400 |
IoTFM.001616 |
The action with same channelDetail is already exist. |
此规则ID已存在相同转发目标,规则ID是rule_id。 |
请排查请求参数中规则ID是否正确。 |
400 |
IoTFM.001617 |
The channel in action is invalid. |
转发目标无效。 |
请排查请求参数中转发目标是否正确。 |
400 |
IoTFM.001618 |
The channel detail in action is invalid. |
转发目标详细信息无效,错误信息:detail_error_msg。 |
请排查请求参数中转发目标详细信息是否正确。 |
403 |
IoTFM.001619 |
Action count exceed the limit of system. |
转发目标数量超过上限。 |
请排查请求参数中转发目标数量是否正确。 |
403 |
IoTFM.001620 |
Action count exceed the limit of rule. |
转发目标数量超过规则上限。 |
请排查请求参数中转发目标数量是否正确。 |
400 |
IoTFM.001621 |
Both dms kafka ip and domain are empty." |
dms kafka ip和domain都为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001622 |
Dms kafka port must be not empty when use ip. |
转发目标使用IP时,端口不能为空。 |
请排查请求参数中端口是否正确。 |
400 |
IoTFM.001623 |
Connect to dms kafka broker timeout. |
连接Dms kafka broker超时。 |
请联系设施云工程师分析解决。 |
400 |
IoTFM.001624 |
Dms kafka ssl handshake failed. |
Dms kafka ssl握手失败。 |
请联系设施云工程师分析解决。 |
400 |
IoTFM.001625 |
Dms kafka sasl auth failed. |
Dms kafka sasl鉴权失败。 |
请联系设施云工程师分析解决。 |
400 |
IoTFM.001450 |
The alarm id is not exist. |
告警ID不存在。 |
请排查请求参数中告警ID是否正确。 |
400 |
IoTFM.001451 |
The alarm id has been closed. |
告警ID已关闭。 |
请排查请求参数中告警ID是否正确。 |
400 |
IoTFM.001700 |
The linkage rule id is not exist. |
联动规则ID不存在。 |
请排查请求参数中联动规则ID是否正确。 |
400 |
IoTFM.001701 |
Invalid filer. Only one of value and in_values can exist. |
告警阈值输入值无效。 |
请排查请求参数中告警阈值输入值是否正确。 |
400 |
IoTFM.001702 |
The condition must contain the DEVICE_DATA condition type. |
条件组中必须包含属性触发类型条件。 |
请排查请求参数中条件组是否包含属性触发类型条件。 |
400 |
IoTFM.001703 |
The condition must contain the DEVICE_LINKAGE_STATUS condition type. |
条件组中必须包含状态触发类型条件。 |
请排查请求参数中条件组是否包含状态触发类型条件。 |
400 |
IoTFM.001704 |
The device alarm rule type must have the device alarm type action. |
设备告警规则类型必须具有设备告警类型操作。 |
请排查请求参数中设备告警规则类型是否包含设备告警类型操作。 |
400 |
IoTFM.001705 |
Neither productId nor deviceId exists. |
缺少指定产品或缺少指定设备。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001706 |
Create inner rule in analytics failed. |
在分析中创建内部规则失败。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001707 |
Update inner rule in analytics failed. |
更新分析中的内部规则失败。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001708 |
Delete inner rule in analytics failed. |
在分析中删除内部规则失败。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001709 |
Neither device_property_condition nor device_linkage_status_condition exists. |
设备属性条件和设备连接状态条件都不存在。 |
请排查请求参数中设备属性条件和设备连接状态条件是否正确。 |
400 |
IoTFM.001710 |
The conditional path format is invalid. |
条件路径格式无效。 |
请排查请求参数中条件路径格式是否正确。 |
400 |
IoTFM.001711 |
The device has no service property. |
设备没有服务属性。 |
请排查请求参数中设备服务属性是否正确。 |
400 |
IoTFM.001712 |
The product has no service property. |
产品没有服务属性。 |
请排查请求参数中产品服务属性是否正确。 |
400 |
IoTFM.001713 |
The property code does not exist in the service. |
属性代码在服务中不存在。 |
请排查请求参数中属性代码是否正确。 |
400 |
IoTFM.001714 |
The linkage rule id already exist. |
联动规则ID已存在。 |
请更换联动规则ID后重试。 |
400 |
IoTFM.001715 |
The alarm name and alarm level are required in action. |
动作中需要告警名称和告警级别。 |
请排查请求参数中告警名称和告警级别是否正确。 |
400 |
IoTFM.001716 |
The group name in action is not the same with the group name in condition group. |
操作中的组名与条件组中的组名不相同。 |
请排查请求参数中操作中的组名与条件组中的组名是否正确。 |
400 |
IoTFM.001717 |
Only one device Id or product Id can be selected. |
只能选择一个设备ID或产品ID。 |
请排查请求参数中设备ID或产品ID是否正确。 |
400 |
IoTFM.001718 |
When the action type is DeviceAlarm, the device_alarm action object should be required. |
当条件包含设备告警动作类型时,必须需要设备告警对象。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001719 |
alarm_status, condition_group_name and group_name not matched. |
告警状态、条件组名称和组名称不匹配。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001720 |
Linkage rule count exceed the limit of system. |
联动规则超过系统限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001721 |
Linkage rule count exceed the limit of instance. |
联动规则超过实例限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001722 |
The variable name is not defined. |
变量名未定义。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001723 |
The variable name is duplicated. |
变量名重复。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001724 |
The expression count is exceed limit. |
表达式数量超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001725 |
The device is not belong to this product. |
设备不属于本产品。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001726 |
The target device should be specified. |
应指定目标设备。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001727 |
The data type of property is not supported. |
属性的数据类型不支持进行点位计算。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001728 |
Multi device property calculation rule should set variable condition. |
多设备属性计算规则应设置规格属性。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001729 |
Multi device property calculation rule should not set device id condition. |
多设备属性计算规则不应设置设备ID。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001730 |
Expression test failed. |
表达式测试失败。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001731 |
The device count by spec properties is exceed limit. |
规格属性匹配的设备数量超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001732 |
The expression should contains variable. |
表达式应包含变量。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001733 |
condition_actions size is too long. |
条件动作数量超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001734 |
DEVICE_GROUP and other action types cannot be configured at the same time. |
设备分组和其它动作类型不能同时设置。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001737 |
The num of zones supported by the rule is exceed limit. |
每个规则最多绑定5个空间 |
请排查请求参数是否正确。 |
400 |
IoTFM.001800 |
edge node gateway not exist. |
边缘网关不存在。 |
请排查请求参数中边缘网关是否正确。 |
400 |
IoTFM.001801 |
edge device not exist. |
边缘设备不存在。 |
请排查请求参数中边缘设备是否正确。 |
400 |
IoTFM.001802 |
gatewayId and dsId and pointId of dc point not unique. |
点位的网关ID、数据源ID以及点位ID的组合不唯一。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001803 |
dc gateway point not exist. |
点位不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001804 |
dc gateway point already exist. |
点位已存在。 |
请更换点位后重试。 |
400 |
IoTFM.001805 |
dc gateway points counts with same edge node and ds id exceed limit. |
该数据源的点位数超出限制。限制是limit。 |
请排查请求参数中数据源的点位数是否正确。 |
400 |
IoTFM.001850 |
data source not exit. |
数据源不存在。 |
请排查请求参数中数据源是否正确。 |
400 |
IoTFM.001851 |
data source already exist. |
数据源已存在。 |
请更换数据源后重试。 |
400 |
IoTFM.001852 |
data source count exceed the limit. |
数据源数目已达到上限。 |
请排查请求参数中数据源数目是否正确。 |
400 |
IoTFM.001853 |
gateway device id and ds id not unique. |
设备ID与数据源ID不唯一。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001854 |
The data source cannot be deleted because points exist in the data source. |
该数据源下存在点位,不允许删除。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001855 |
The file of batch import points is empty." |
导入点位文件为空。 |
请排查请求参数中导入点位文件是否正确。 |
400 |
IoTFM.001856 |
The file content of batch import points to be imported is illegal. |
导入的点位文件内容非法。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001857 |
Thre count of dc gateway points with same edge node exceed limit. |
该网关下的数据源总点数超出限制 |
请排查请求参数是否正确。 |
400 |
IoTFM.001860 |
War room already exist. |
War已经存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001861 |
War room groups is empty. |
War分组为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001862 |
The product in war room group is not exist. |
War分组中的产品不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001863 |
The device id list in war room group is empty. |
War分组中设备id列表为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001864 |
The device id list in war room group is not exist. |
War分组中的设备id列表不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001865 |
The properties in war room group are invalid. |
War分组中的属性无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001866 |
The war room is not exist. |
War不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001867 |
The war room status is invalid. |
War状态无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001868 |
Exception occurred when build the war room delivery data. |
War交付数据异常。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001869 |
Exception occurred when deliver the war room points. |
下发War异常。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001870 |
Device points are not exist. |
设备点位不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001900 |
The import file's size is greater than limit size. |
导入文件大小超出限制。大小为size,限制为limit。 |
请排查请求参数中导入文件大小是否正确 |
400 |
IoTFM.001901 |
The import file name's length is greater than limit length. |
导入文件名称长度超出限制。长度为length,限制为limit。 |
请排查请求参数中导入文件名称长度是否正确 |
400 |
IoTFM.001902 |
The import file's parameter is illegal. |
参数校验非法。参数是parameter。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001903 |
The sheet is null. |
文件表格为空。 |
请排查请求参数中文件表格是否正确。 |
400 |
IoTFM.001904 |
The file line is empty. |
文件行为空。 |
请排查请求参数中文件行是否正确。 |
400 |
IoTFM.001905 |
The file lines is greater than limit. |
文件行数超出限制。限制是limit。 |
请排查请求参数中文件行数是否正确。 |
400 |
IoTFM.001950 |
The batchtask type is invalid. |
批量任务类型无效。 |
请排查请求参数中批量任务类型是否正确。 |
400 |
IoTFM.001951 |
Both targets and targets_filter cannot be empty at the same time. |
target和target_filter不能同时为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001952 |
Devices in targets are not exist. |
设备不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001953 |
There are not devices exist after targets_filter filter." |
指定条件下不存在设备。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001954 |
Device count in batchtask exceed limit. |
任务中的设备数量超过限制。限制是limit。 |
请排查请求参数中任务中的设备数量是否正确。 |
400 |
IoTFM.001955 |
Batch task with same task name exists. |
已存在相同名称的批量任务。 |
请更换批量任务名称后重试。 |
400 |
IoTFM.001956 |
The batchtask id is not exist. |
批量任务ID不存在。 |
请排查请求参数中批量任务ID是否正确。 |
403 |
IoTFM.001965 |
Forbid downloading device log in current task status. |
当前任务状态不允许下载日志。 |
请检查当前任务状态是否正确。 |
400 |
IoTFM.001966 |
Device log are not exist when download device log. |
下载设备日志时,设备日志不存在。 |
请排查当前设备是否产生日志。 |
400 |
IoTFM.001967 |
Forbid downloading device log in current task status. |
日志采集任务总数超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001970 |
Device log are not exist when download device log. |
导入OTA升级包类型无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001957 |
Total count of all device log collect tasks exceed limit. |
OTA升级任务的扩展信息无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001958 |
The ota package type is not invalid. |
无法删除批处理任务,因为它尚未完成。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001971 |
The ota package name is not invalid. |
OTA升级包名称无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001972 |
The ota package id is not exist. |
OTA升级包ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001973 |
Total size of all ota packages exceed limit. |
OTA升级包总大小超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001974 |
Total count of all ota packages exceed limit. |
OTA升级包总数超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001975 |
Total count of all ota upgrade tasks exceed limit. |
OTA升级任务总数超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.001976 |
Ota package sign algorithms is invalid. |
OTA包签名算法无效。 |
请排查请求参数是否正确。 |
400 |
ioTFM.001977 |
Ota package sign is invalid. |
OTA包签名无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002000 |
get token response error |
获取令牌响应错误。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002001 |
response have no x-subject-token header |
响应没有x-subject-token。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002002 |
Invalid private network address. |
网络地址非法。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002100 |
Operation not allowed. The amount of certificate has reached the limit |
证书数量已达到限制。 |
请排查请求参数中证书数量是否正确。 |
400 |
IoTFM.002101 |
Invalid certificate content |
证书内容无效。 |
请排查请求参数中证书内容是否正确。 |
400 |
IoTFM.002102 |
Invalid input. The certificate already exist. |
输入无效。证书已存在。 |
请更换可用的证书后重试。 |
400 |
IoTFM.002103 |
The certificate is expired. |
证书已过期。 |
请排查请求参数中证书是否正确。 |
400 |
IoTFM.002104 |
Operation not allowed. The amount of pki has reached the limit. |
pki的数量已达到限制。 |
请排查请求参数中pki的数量是否正确。 |
400 |
IoTFM.002105 |
Invalid input. The pki already exist. |
输入无效。pki已经存在。 |
请更换pki后重试。 |
400 |
IoTFM.002106 |
Invalid input. The pki is not exist. |
输入无效。pki不存在。 |
请排查请求参数中pki是否正确。 |
400 |
IoTFM.002107 |
Operation not allowed. The pki still has certificates. |
操作失败。pki仍然有证书。 |
请先删除pki证书再进行操作。 |
400 |
IoTFM.002108 |
Invalid certificate private key content. |
证书私钥内容无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002109 |
The certificate is not exist. |
证书不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002110 |
The device type does not support certificate. |
设备类型不支持证书。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002200 |
Edge appId is not exist. |
该应用 ID不存在。 |
请排查请求参数中应用 ID是否正确。 |
400 |
IoTFM.002201 |
Edge appId is already exist. |
该应用 ID已存在。 |
请更换应用 ID后重试。 |
400 |
IoTFM.002202 |
Edge app version is not exist. |
该应用版本不存在。 |
请排查请求参数中应用 版本是否正确。 |
400 |
IoTFM.002203 |
Edge app version is already exist. |
该应用版本已存在。 |
请更换应用版本后重试。 |
400 |
IoTFM.002204 |
Edge app template is not exist. |
边缘应用模板不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002205 |
Edge App template already associated by app version. |
边缘应用模板已被应用版本关联。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002206 |
Edge App count of same gateway exceed limit. |
同一网关的边缘应用计数超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002207 |
Edge gateway device count of same app exceed limit. |
同一应用的边缘网关设备数超出限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002300 |
Edge gateway id is not exist. |
边缘网关ID不存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.002301 |
Edge module id is not exist. |
边缘模块ID不存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.002302 |
Edge module is not support shadow. |
边缘模块不支持模块影子 |
请排查请求参数是否正确。 |
400 |
IoTFM.002303 |
HLink or MessageFlow module is not installed. |
尚未安装hlink或messageflow模块 |
请排查请求参数是否正确。 |
400 |
IoTFM.002304 |
The input and output of the MessageFlow and HLink module are incorrect. |
模块输入端点或输出端点配置错误。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002400 |
Edge Device extension_info.subtype is invalid. |
边缘设备扩展信息中的subtype无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002401 |
Edge Device module.module_type is invalid. |
边缘设备模块中的模块类型无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002402 |
Edge Device module_id should be not empty! |
边缘设备模块ID不能为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002403 |
Edge device and its parent device should be in the same gateway! |
子设备与父设备不在同一个网关下。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002404 |
The parent device of this device should be an electromechanical device. |
父设备类型必须为机电设备。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002405 |
The hlinkg device of this gateway is already exist. |
该网关下的HLINKG设备已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002406 |
Invalid input. The device_id must be the ID of an electromechanical device. |
输入无效。设备ID必须是机电设备的ID。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002407 |
Invalid input. The end_time must be later than the execute_time. |
输入无效。结束时间必须晚于执行时间。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002408 |
Invalid input. Total count of gateway device exceed limit. |
输入无效。网关设备总数超出限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002409 |
Invalid input. Total count of controller device exceed limit. |
输入无效。控制器设备总数超出限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002410 |
Invalid input. Total count of elec device exceed limit. |
输入无效。机电设备总数超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002411 |
Invalid input. Total count of hlinkg device exceed limit. |
输入无效。HLINKG设备总数超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002412 |
The $edge_omagent module is not deployed or is running abnormally. |
$edge_omagent模块未部署或运行异常。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002413 |
Invalid input. Edge devices do not support setting property. |
输入无效。边缘设备不支持设置属性。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002414 |
Read excel file failed when import device point info. |
导入设备点信息时读取excel文件失败。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002415 |
Invalid input. The number of rows in the Excel file exceed limit. |
输入无效。Excel文件行数超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002500 |
Import line count exceed limit. |
导入文件行数超出限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002501 |
Controller point no is invalid. |
控制器端口号无效 |
请排查请求参数是否正确。 |
400 |
IoTFM.002502 |
signal type is invalid. |
信号类型无效 |
请排查请求参数是否正确。 |
400 |
IoTFM.002503 |
Controller device is not exist. |
控制器设备不存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.002504 |
Device type of controller device is invalid. |
控制器设备类型无效 |
请排查请求参数是否正确。 |
400 |
IoTFM.002505 |
Elec device is not exist. |
机电设备不存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.002506 |
Device type of elec devices is invalid. |
机电设备类型无效 |
请排查请求参数是否正确。 |
400 |
IoTFM.002507 |
Controller device and elec device are not under the same gateway. |
控制器设备与机电设备不在同一个网关下 |
请排查请求参数是否正确。 |
400 |
IoTFM.002508 |
Service id is not exist in elec product. |
机电设备对应的产品物模型中不存在该服务ID |
请排查请求参数是否正确。 |
400 |
IoTFM.002509 |
Point name is not exist in elec product |
机电设备对应的产品物模型中不存在该点位 |
请排查请求参数是否正确。 |
400 |
IoTFM.002510 |
Data type of point is invalid in elec product. |
点位数据类型无效 |
请排查请求参数是否正确。 |
400 |
IoTFM.002511 |
The mapping id is not exist. |
配盘表ID不存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.002512 |
The mapping with same elec device point is already exist. |
已存在相同机电设备点位的配盘表 |
请排查请求参数是否正确。 |
400 |
IoTFM.002513 |
Another import or create mapping task with same controller is in progress. |
已存在相同的配盘表导入任务 |
请排查请求参数是否正确。 |
400 |
IoTFM.002514 |
The controller type of the same controller device are inconsistent. |
同一控制器设备的控制器类型不一致 |
请排查请求参数是否正确。 |
400 |
IoTFM.002515 |
The controller model of the same controller device are inconsistent. |
同一控制器设备的控制器型号不一致 |
请排查请求参数是否正确。 |
400 |
IoTFM.002516 |
The point type must be AO or BO when point name ends with Sp, or else must be AI or BI. |
当点位类型为AO或BO时,点位名称必须以Sp结尾;当点位名称以Sp结尾时,点位类型必须为AO或BO。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002517 |
The controller model corresponding to the controller type is invalid. |
控制器类型对应的控制器型号不合法 |
请排查请求参数是否正确。 |
400 |
IoTFM.002518 |
The elec device point mapping is not exist. |
机电设备点位映射不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002519 |
The mapping is not allow to edit because of being used to deploy in scenario. |
该配盘表记录已在场景编排中部署,不允许编辑。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002520 |
The mapping is not allow to delete because of being used to deploy in scenario. |
该配盘表记录已在场景编排中部署,不允许删除。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002521 |
Failed to batch delete mappings. |
批量删除映射失败。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002550 |
The scenario id is not exist. |
场景编排ID不存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.002551 |
The scenario id is already exist. |
场景编排ID已存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.002552 |
The scenario name is already exist. |
场景编排名称已存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.002553 |
The scenario is not allow to edit. |
该场景不允许编辑 |
请排查请求参数是否正确。 |
400 |
IoTFM.002554 |
The scenario is not allow to generate. |
该场景不允许生成 |
请排查请求参数是否正确。 |
400 |
IoTFM.002555 |
The scenario is not allow to deploy. |
该场景不允许部署 |
请排查请求参数是否正确。 |
400 |
IoTFM.002556 |
The scenario is not allow to undeploy. |
该场景不允许取消部署 |
请排查请求参数是否正确。 |
400 |
IoTFM.002557 |
The scenario is not allow to delete. |
该场景不允许删除 |
请排查请求参数是否正确。 |
400 |
IoTFM.002558 |
The scenario has no device points. |
该场景中没有采集点位 |
请排查请求参数是否正确。 |
400 |
IoTFM.002559 |
The scenario metadata import template failed. |
场景元数据导入模板失败。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002560 |
The scenario metadata split failed. |
场景元数据拆分失败。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002561 |
The scenario metadata convert failed. |
场景元数据转换失败。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002562 |
The scenario selected device is not exist. |
场景中选择的点位数据对应设备不存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.002563 |
The scenario selected device is not belong to same gateway. |
场景中选择的点位数据对应设备不在同一个网关下 |
请排查请求参数是否正确。 |
400 |
IoTFM.002564 |
No hlinkg device exists under the gateway. |
该网关下不存在HLINKG设备 |
请排查请求参数是否正确。 |
400 |
IoTFM.002565 |
The scenario prepare for generate/deploy/undeploy failed. |
场景预生成/部署/取消部署失败 |
请排查请求参数是否正确。 |
400 |
IoTFM.002566 |
Invalid input. The control logic file content is empty or the format is incorrect. |
上传控制逻辑文件为空或者格式无效 |
请排查请求参数是否正确。 |
400 |
IoTFM.002567 |
Invalid input. The number of devices bound to the control logic file exceeds the maximum. |
上传的控制逻辑文件中绑定设备个数超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002568 |
Invalid input. The device corresponding to the point is not bound. |
点位对应的设备未绑定。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002569 |
Cross-scenario use of the device soft point is not allowed. Please modify the control logic file. |
不允许跨场景使用设备软点位。请修改控制逻辑文件。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002570 |
The scenario task id is not exist. |
场景任务ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003900 |
The protocol point does not exist. |
关联点位不存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.003901 |
The protocol point already exists. |
关联点位已经存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.003902 |
Invalid input. property path format is invalid. |
属性路径格式非法 |
请排查请求参数是否正确。 |
400 |
IoTFM.003903 |
Source device and target device are not under the same gateway. |
源设备和目标设备不在同一网关下 |
请排查请求参数是否正确。 |
400 |
IoTFM.003904 |
The property path of the device does not exist in the data collection point. |
采集点中不存在该设备的属性路径 |
请排查请求参数是否正确。 |
400 |
IoTFM.003905 |
Invalid input. the source device id and target device id cannot be the same. |
输入无效。源设备ID和目标设备ID不能是相同的 |
请排查请求参数是否正确。 |
400 |
IoTFM.003906 |
The data type of the source device property path is inconsistent with that of the target device property path. |
源设备属性路径的数据类型与目标设备属性路径的数据类型不一致 |
请排查请求参数是否正确。 |
400 |
IoTFM.003907 |
Invalid input. the source device is not bound to the HLink module. |
输入无效。源设备未绑定到HLink模块。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003908 |
Invalid input. the target device is bound to a module id. |
输入无效。目标设备已绑定到模块ID。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002414 |
Import failed. Check whether the file to be imported is correct according to the import prompt. |
导入失败,请参照导入提示检查导入文件是否正确。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002600 |
Invalid input. The calendar is already exist. |
日历名称无效输入。日历已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002601 |
Invalid input. The calendar is not exist. |
日历ID无效输入。日历不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002602 |
Invalid input. The calendar date is all empty. |
操作失败。日历日期全部为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002603 |
Invalid input. The calendar date items name is repeat. |
操作失败。自定义日期名称重复。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002604 |
Invalid input. The calendar date items date is repeat. |
操作失败。自定义日期日期重复。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002605 |
Invalid input. The week calendar date items size not 7. |
操作失败。周日历日期项的大小不是7。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002606 |
Invalid input. The calendar is being used. |
操作失败。该名称的日历正在使用。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002607 |
Invalid input. The num of calendar exceed limit. |
操作失败。日历的数量超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002800 |
Invalid input. Work type must be specified for calendar. |
操作失败。必须为日历指定工作类型。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002801 |
Invalid input. The scene is not exist. |
操作失败。场景不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002802 |
Invalid input. The scene is already exist. |
操作失败。场景已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002803 |
Invalid input. The scene is being used. |
操作失败。该名称的场景正在使用。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002804 |
Invalid input. The num of scene exceed limit. |
操作失败。某些强制点ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002805 |
Invalid input. The scene is being used and can not update control_level and calendar. |
操作失败。强制点数超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002900 |
Invalid input. once_calendar can not be empty when execute_mode is once. |
操作失败。场景正在使用,无法更新控制级别和日历。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002901 |
Invalid input. loop_mode can not be null when execute_mode is loop. |
操作失败。单次执行模式下不能清空执行范围。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002902 |
Invalid input. week_calendars can not be empty when loop_mode is weekly. |
操作失败。循环执行模式下不能清空执行范围。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002903 |
Invalid input. device_execute_span.start and device_execute_span.end can not be repeated. |
操作失败。当循环模式为每周时,周日历不能为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002904 |
Invalid input. device_execute_spans item can not be repeated. |
操作失败。执行时间的结束时间不能早于或等于起始时间。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002905 |
Invalid input. The schedule control is already exist. |
操作失败。执行时间存在重复。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002906 |
Invalid input. The schedule control is not exist. |
操作失败。该定时任务已存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.002907 |
Invalid input. The num of schedule control exceed limit. |
操作失败。定时任务不存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.002908 |
Invalid input. scene_calendar can not be null when loop_mode is scene. |
操作失败。定时任务的数量超过限制 |
请排查请求参数是否正确。 |
400 |
IoTFM.002909 |
Invalid input. property_path format invalid. |
操作失败。当循环模式为场景时,场景日历不能为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002910 |
Invalid input. control_level or scene_id Only one exist. |
操作失败。属性路径格式无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002911 |
Invalid input. execute_mode can not be null when without calendars. |
操作失败。控制级别和场景只能有一个存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002912 |
Invalid input. execute_spans size only can be 1 when execute_mode is once. |
操作失败。没有日历时,执行模式不能为空 |
请排查请求参数是否正确。 |
400 |
IoTFM.002913 |
The num of schedule devices exceed limit! |
操作失败。定时控制中设备数量超过限制 |
请排查请求参数是否正确。 |
400 |
IoTFM.002914 |
The execute contents product is repeat! |
操作失败。执行任务中的产品重复 |
请排查请求参数是否正确。 |
400 |
IoTFM.002915 |
The schedule control devices exceed limit! |
操作失败。定时控制中设备数量超过限制 |
请排查请求参数是否正确。 |
400 |
IoTFM.003000 |
Invalid input. Some forced point ids are not exist. |
操作失败。某些强制点ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003001 |
Invalid input. The num of forced points exceed limit. |
操作失败。强制点数超出限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003010 |
The template is already exist. |
模板已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003011 |
The template is not exist. |
模板不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003012 |
The template num of every instanceId exceeds the limit. |
该实例下的模板数量已超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003013 |
The template num of template table exceeds the limit. |
模板数量已超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003014 |
This template file can't delete because of used. |
该模板已被使用,不允许删除。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003015 |
num of batch delete dc points exceed the limit. |
批量删除点位数量已超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003016 |
dc_points is partially deleted, the dc_points deleted is |
点位部分删除。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003017 |
fail to batch delete dc_points, info of points success to delete is |
批量删除点位失败。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002700 |
Some devices are not exist. |
分组中有不存在的设备ID |
请排查请求参数是否正确。 |
400 |
IoTFM.002701 |
Some devices repeat. |
分组中有重复的设备ID |
请排查请求参数是否正确。 |
400 |
IoTFM.002702 |
Product is not unique! |
分组中产品不是唯一的 |
请排查请求参数是否正确。 |
400 |
IoTFM.002703 |
GroupId is not exist! |
分组ID不存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.002704 |
The num of group devices exceed limit.! |
分组中设备数量超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.002705 |
The time of control task is invalid! |
控制任务时间不合法 |
请排查请求参数是否正确。 |
400 |
IoTFM.002706 |
some devices are not exist in group! |
部分设备不属于该分组 |
请排查请求参数是否正确。 |
400 |
IoTFM.002707 |
TaskId is not exist! |
批量管控任务ID不存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.002708 |
Invalid input. The device group is already exist. |
操作失败。该设备分组已存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.002709 |
Invalid input. The device group is being used and can not be deleted. |
操作失败。设备组正在使用,不能删除 |
请排查请求参数是否正确。 |
400 |
IoTFM.003100 |
The device config id is not exist. |
操作失败。设备配置ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003101 |
The device config name is not exist. |
操作失败。设备配置名称不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003102 |
The device config id already exist. |
操作失败。设备配置ID已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003103 |
The device config name already exist. |
操作失败。设备配置名称已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003104 |
The device hasn't configured with a device configuration. |
- |
请排查请求参数是否正确。 |
400 |
IoTFM.003105 |
The device has been configured with a device configuration. |
操作失败。该设备尚已配置设备组态。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003106 |
The zone id is not exist. |
空间ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003107 |
The zone id already exist. |
空间ID已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003108 |
The zone config name is not exist. |
空间配置名称不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003109 |
The zone config name already exist. |
空间配置名称已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003110 |
The zone config is not exist. |
空间配置不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003111 |
The zone config already exist. |
空间配置已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003201 |
The device system id not exist. |
操作失败。设备系统ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003202 |
The selected_product_properties must not be null when display_mode is LIST |
操作失败。当展示模式为列表时,产品和配置属性不能为空 |
请排查请求参数是否正确。 |
400 |
IoTFM.003203 |
The ba_config_url must not be null when display_mode is DIAGRAM |
操作失败。当展示模式为组态图时,组态图地址不能为空 |
请排查请求参数是否正确。 |
400 |
IoTFM.003204 |
The device system name already exist. |
操作失败。设备系统名称已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003205 |
The device system has already contained the product. |
操作失败。设备系统已包含该产品。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003206 |
The product not exist in the device system. |
操作失败。该产品在设备系统中不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003207 |
zone_id can not be empty when keeping sort |
操作失败。保持排序时空间不能为空 |
请排查请求参数是否正确。 |
400 |
IoTFM.003208 |
device_system_type can not be empty when keeping sort |
操作失败。保持排序时设备系统类型不能为空 |
请排查请求参数是否正确。 |
400 |
IoTFM.003209 |
ba_config_url must be null if display_mode is LIST |
操作失败。展示模式位列表时,组态图地址必须为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003210 |
selected_product_properties must be null if display_mode is DIAGRAM |
操作失败。当展示模式为组态图时,产品和配置属性必须为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003211 |
The device system num of instance is out of limit |
操作失败。设备系统数量超出限制 |
请排查请求参数是否正确。 |
400 |
IoTFM.003212 |
The device system type is not in the Apollo configuration or is not a leaf node. |
操作失败。设备系统类型不在阿波罗配置中或不是叶节点。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003213 |
The ba-config domain name is null. |
组态域名为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003214 |
The baConfigUrl is invalid. It must start with the domain name of facility aPaaS console. |
操作失败。组态图地址无效。必须以智能设施云平台控制台的域名开头。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003250 |
The instance id is not exist. |
操作失败。设备控制已存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.003251 |
domain id is not exist for the instance id. |
操作失败。设备控制不存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.003252 |
The input token is invalid. |
操作失败。设备控制数量已超过限制 |
请排查请求参数是否正确。 |
400 |
IoTFM.003350 |
The time interval is invalid. |
时间间隔无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003351 |
A task is running. |
已有导出任务运行中。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003352 |
The product of the number of devices and the number of attributes exceeds the limit. |
设备数与属性数的乘积超出限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003353 |
The device num is zero. |
设备编号为零。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003354 |
The properties is null. |
属性为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003355 |
The endTime is outside the acceptable range of 120 days. |
结束时间超出120天的可接受范围。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003356 |
The start time is later than the end time. |
开始时间大于结束时间。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003357 |
The time range between startTime and endTime exceeds 31 day. |
开始时间和结束时间之间的时间范围超过31天。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003358 |
The exported properties data is null. |
导出的属性数据为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003359 |
Some devices do not belong to the same product. |
部分设备不属于同一产品。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003400 |
Invalid input. The calendar is already exist. |
日历名称无效输入。日历已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003401 |
Invalid input. The calendar is not exist. |
日历ID无效输入。日历不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003402 |
Invalid input. The calendar date is all empty. |
操作失败。日历日期全部为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003403 |
Invalid input. The calendar date items name is repeat. |
操作失败。自定义日期名称重复。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003404 |
Invalid input. The calendar date items date is repeat. |
操作失败。自定义日期日期重复。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003405 |
Invalid input. The week calendar date items size not 7. |
操作失败。周日历日期项的大小不是7。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003406 |
Invalid input. The calendar is being used. |
操作失败。该名称的日历正在使用。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003407 |
Invalid input. The num of calendar exceed limit. |
操作失败。日历数超出限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003250 |
The instance id is not exist. |
实例ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003251 |
domain id is not exist for the instance id. |
该实例ID下不存在Domain |
请排查请求参数是否正确。 |
400 |
IoTFM.003252 |
The input token is invalid. |
Token无效 |
请排查请求参数是否正确。 |
400 |
IoTFM.003253 |
The input token is unauthorized. |
Token认证失败 |
请排查请求参数是否正确。 |
400 |
IoTFM.003254 |
The input ticket is invalid. |
Ticket无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003255 |
The input ticket is unauthorized. |
Ticket认证失败 |
请排查请求参数是否正确。 |
400 |
IoTFM.003300 |
The rule id is not exist. |
规则ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003301 |
Load Factors internal error occurred. |
加载规则因子时出现内部错误。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003302 |
Energy eff rule number reach limit per instance. |
当前实例下的调优规则的个数已到达限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003303 |
Energy eff rule number reach limit per cold site. |
当前冷站下的调优规则的个数已到达限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003304 |
Energy cold site not exist. |
冷站不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003305 |
Duplicate factor exist in require area. |
必选条件组存在重复的规则因子。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003306 |
Duplicate factor exist in optional areas. |
可选条件组存在重复的规则因子。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003307 |
Duplicate factor exist between require and optional area. |
必选条件组与可选条件组之间存在重复的规则因子。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003308 |
The factors not exist. |
规则因子不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003320 |
The cold site id is not exist. |
冷站ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003321 |
The city code is not configured for the zone. |
所选空间未配置城市编码。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003322 |
The device does not exist in the zone. |
当前空间下不存在该设备。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003323 |
The device spec properties is not configured. |
设备的规格属性未配置。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003324 |
Cold site devices do not belong to the same product. |
冷站中的设备不属于同一个产品。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003325 |
The product to which the device belongs is not right. |
设备所属产品无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003326 |
The devices has been bound to another cold site. |
设备已被其他冷站绑定。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003327 |
Cold site count exceed the limit of zone. |
当前空间下的冷站个数已到达限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003328 |
Cold site count exceed the limit of instance. |
当前实例下的冷站个数已到达限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003329 |
Cold site count exceed the limit of system. |
当前系统下的冷站个数已到达限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003330 |
This type of device needs to be configured in the cold site. |
冷站需要配置该类型设备。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003331 |
This type of device count in cold site exceed the limit. |
冷站此类设备数量超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003332 |
The device count in cold site exceed the limit. |
冷站设备数超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003334 |
Init default algorithm fail. |
初始化默认算法失败。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003335 |
The start time is invalid, which should not after the current time. |
开始时间不合法,不应该在当前时间之后。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003336 |
Time range invalid, start time should not after end time. |
时间范围无效,开始时间不得晚于结束时间。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003337 |
The cold site doesn't has a cold system. |
冷站点没有冷系统。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003338 |
The number of cold system of the site exceed limit. |
站点冷系统数量超限。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003339 |
The advice id is not exist. |
通知ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003340 |
Advices is not unique by the advice_id. |
建议不是唯一的,由通知ID。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003341 |
The status of the advice can't be executed. |
建议的状态无法执行。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003342 |
The types of data item can't be executed. |
无法执行数据项的类型。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003343 |
Invalid add machine data item, no chiller to add. |
添加机器数据项无效,没有要添加的冷机。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003344 |
Invalid sub machine data item, no chiller to sub. |
无效的子级设备数据项,没有冷机的子级。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003345 |
Unsupported advice type to execute. |
要执行的建议类型不受支持。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003346 |
Unsupported advice level to execute. |
要执行的建议级别不受支持。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003347 |
Data item value not found. |
未找到数据项值。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003348 |
cold system device type is not iot edge electric type. |
设备类型不是机电设备类型。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003750 |
The price name is duplicate. |
电价配置名称重复。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003751 |
now time is greater than the effectiveDate. |
电价开始时间应晚于当前时间。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003752 |
effectiveStartDate should at least be the next day of now. |
电价开始时间最早应该为明天。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003753 |
effectiveStartDate should after 2 hours from now. |
电价开始时间最早应该为两小时以后。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003754 |
rootZoneId is invalid. |
主空间ID无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003755 |
timeZone is null. |
时区无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003756 |
priceConfigPeriod has gap or overlap. |
电价配置时间有重叠或未配满24小时。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003757 |
rangeStart or rangeEnd is invalid. |
电价配置时间中的开始时间或结束时间无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003758 |
rangeStart to rangeEnd lower 15min. |
电价配置时间中的开始时间与结束时间的间隔小于15分钟。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003759 |
periodList is empty. |
电价配置中应用时间为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003760 |
priceConfigs size larger than 4. |
电价配置中的电价类型个数大于4。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003761 |
priceConfigs is empty. |
电价配置中的电价类型为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003762 |
price type is wrong. |
电价配置中电价类型错误。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003763 |
price type is duplicate. |
电价配置中的电价类型重复。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003764 |
priceConfigId is invalid. |
电价配置ID无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003765 |
price config in effective or expired. |
价格配置是否生效或过期。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003766 |
priceConfigId is not exist. |
价格配置ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003600 |
The algorithm id is not exist. |
算法ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003601 |
The algorithm name already exists. |
算法名称已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003602 |
The algorithm already active. |
算法已经启用。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003603 |
Algorithm count exceed the limit of zone. |
该空间下算法实例个数已达到限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003604 |
Algorithm count exceed the limit of instance. |
该实例下算法实例个数已达到限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003605 |
Algorithm count exceed the limit of system. |
该系统下算法实例个数已达到限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003606 |
The algorithm version id is not exist. |
算法版本ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003607 |
The algorithm version name already exists. |
算法版本名称已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003608 |
The algorithm already has active version. |
该算法实例已经有启用中的算法版本。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003609 |
The algorithm does not have an active version. |
该算法实例尚未有启用中的算法版本。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003610 |
Version count exceed the limit of algorithm. |
该算法实例下的算法版本个数已达到限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003611 |
The plan id is not exist. |
调度计划ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003612 |
The plan name already exists. |
调度计划名称已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003613 |
The plan of this type already exists. |
该类型的调度计划已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003614 |
The task id is not exist. |
任务ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003615 |
The algorithm status is inactive. |
算法实例未启用。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003616 |
The algorithm already has executing task. |
该算法实例有正在执行的任务。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003617 |
The algorithm already has active plan. |
该算法实例有正在执行的调度计划。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003618 |
The algorithm version already active. |
该算法版本已启用。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003619 |
The plan already active. |
该调度计划已启用。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003620 |
The algorithm model not exist by version id. |
该算法版本ID下算法模型不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003621 |
Algorithm count exceed the limit of business. |
算法实例数量超过业务限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003622 |
The start time should after the current time. |
开始时间应晚于当前时间。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003623 |
The start time should not after the ent time. |
开始时间不能晚于结束时间。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003624 |
The algorithm version already has executing train task. |
算法版本已经存在正在执行的训练任务。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003333 |
Failed to initialize the default algorithm. |
初始化默认算法失败。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003850 |
The task is not exit. |
任务ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003851 |
The num of unexecuted tasks exceeds the threshold. |
未执行任务数超过阈值。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003852 |
The task doesn't have download file. |
该任务不存在下载文件。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003853 |
The task execution timed out. |
任务执行超时。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003854 |
The task is being processed and cannot be deleted. |
任务正在处理中,不能删除。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003855 |
The main task does not match the subtask type. |
主任务与子任务类型不匹配。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003856 |
The file is invalid. |
文件无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003857 |
A required field is missing. |
缺少必填字段。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003858 |
For details about the failure cause, download the file. |
具体失败原因,请下载文件查看。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003859 |
This type of task is not supported. |
不支持此类型的任务。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003800 |
The ruleset template id does not exist. |
规则集模板ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003801 |
The ruleset template name already exists. |
规则集模板名称已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003802 |
The ruleset template is referenced. |
该规则集模板已被引用 |
请排查请求参数是否正确。 |
400 |
IoTFM.003803 |
The ruleset id is not exist. |
规则集ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003804 |
The ruleset name already exists. |
规则集名称已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003653 |
The rule set has been deleted. |
规则集已被删除。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003805 |
The ruleset template info does not match. |
规则集模板ID和规则集模板信息不匹配 |
请排查请求参数是否正确。 |
400 |
IoTFM.003806 |
The rule id is not exist. |
规则ID不存在 |
请排查请求参数是否正确。 |
400 |
IoTFM.003807 |
Active ruleset can not be modified. |
规则集已启用不能被修改 |
请排查请求参数是否正确。 |
400 |
IoTFM.003808 |
The rule id already exists. |
规则ID已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003809 |
The number of bound devices exceeds the limit. |
绑定的设备数量超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003810 |
This product is not the most downstream product of the current ruleset. |
此产品不是当前规则集的最下游产品。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003811 |
Template information cannot be modified for ruleset. |
无法修改规则集的模板信息。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003812 |
The number of rules exceeds the limit of ruleset |
规则数超过规则集限制 |
请排查请求参数是否正确。 |
400 |
IoTFM.003813 |
The rule item relationship is invalid. |
规则项关系无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003814 |
The ruleset template id is INACTIVE. |
规则集模板已停用 |
请排查请求参数是否正确。 |
400 |
IoTFM.003815 |
The device is not belong to the product. |
设备不属于该产品。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003816 |
The ruleset template does not contain the product |
规则集模板不包含该产品。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003817 |
The rule contains duplicate device ID |
规则包含重复的设备ID。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003818 |
There is loop in rule config logics. |
规则配置逻辑中存在循环。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003819 |
The rule must contain only one mandatory CREATE_ALARM type and one optional RECOVER_ALARM type. |
规则必须仅包含一个必选触发规则和一个可选恢复规则 |
请排查请求参数是否正确。 |
400 |
IoTFM.003820 |
Duplicate rule config logics exist. |
存在重复的规则配置逻辑。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003821 |
The source rule of the target rule exceeds the limit. |
目标规则的源规则超出限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003822 |
Rule item exceeds the limit of rule. |
规则项超出规则限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003823 |
The ruleset template type does not contain the product. |
产品不在模板类型的范围内。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003824 |
The devices bound to the rules of the same product are not same. |
同一产品下的规则绑定的设备不相同。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003825 |
The delay diagnosis property must be selected in the common diagnosis propertys. |
在普通判断属性中,必须选择生效条件属性。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003826 |
Ruleset template type not exist. |
规则集模板类型不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003827 |
Active ruleset template can not be modified or deleted. |
无法修改或删除已启用的规则集模板。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003828 |
Duplicate product in the ruleset template. |
规则集模板中的产品重复。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003829 |
Rule in config logic is not belong the ruleset. |
配置逻辑中的规则不属于规则集。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003830 |
Ruleset count exceeds the limit. |
规则集计数超出限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003831 |
The diagnosis duration exceeds the limit. |
诊断时长超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003832 |
Rule item customer expression is invalid. |
规则项客户表达式无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003833 |
The property path in expression is invalid. |
表达式中的属性路径无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003951 |
Energy eff rule number reach limit per compressor site. |
规则数量已达到当前空压站的限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003952 |
Energy compressor site not exist. |
空压站不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003953 |
The compressor site id is not exist. |
空压站ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003954 |
The device does not exist in the zone. |
该设备不存在于当前空间下。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003955 |
The device spec properties is not configured. |
设备的规格属性未配置。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003956 |
Compressor site devices do not belong to the same product. |
空压站的设备不属于同一个产品。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003957 |
The product to which the device belongs is not right. |
设备所属产品无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003958 |
The devices has been bound to another compressor site. |
设备已被其他空压站绑定。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003959 |
Compressor site count exceed the limit of zone. |
当前空间下的空压站个数已到达限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003960 |
Compressor site count exceed the limit of instance. |
当前实例下的空压站个数已到达限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003961 |
Compressor site count exceed the limit of system. |
当前系统下的空压站个数已到达限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003962 |
This type of device needs to be configured in the compressor site. |
空压站需要配置该类型设备。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003963 |
This type of device count in compressor site exceed the limit. |
空压站设备数超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.003964 |
The device count in compressor site exceed the limit. |
设备数量已达到当前空压站的限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004000 |
The boundary id is not exist. |
边界ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004001 |
Invalid input. the system type or system id is empty. |
输入无效,系统类型或系统id为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004002 |
Invalid input. the zone id id is empty. |
输入无效。空间id id为空。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004003 |
The boundary name is already exist. |
边界名称已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004004 |
The boundary has sub-boundaries. please delete the sub-boundaries first. |
该边界有子边界,请先删除子边界。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004005 |
Depth of the boundary exceeds the limit. |
边界深度超出限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004006 |
The number of bound boundary meters exceeds the limit. |
绑定的边界表数量超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004007 |
The number of boundary exceeds the limit. |
边界数量超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004008 |
The boundary of the instance exceeds the limit. |
实例的边界超出限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004009 |
The boundary of the space exceeds the limit. |
空间的边界超出了限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004010 |
The number of boundaries under the root boundary exceeds the limit. |
根边界下的边界数量超过限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004011 |
The number of root boundary exceeds the system limit. |
根边界数量超过系统限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004012 |
The boundary is bounded by some meters. |
边界以米为界。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004013 |
Another create boundary task with same parent boundary is in progress. |
正在进行另一个具有相同父边界的创建边界任务。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004014 |
The meter id is not exist. |
电表ID不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004015 |
The meter name is already exist. |
电表名称已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004016 |
The boundary of the meter binding exceeds the limit. |
电表绑定边界超限。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004017 |
The root boundary of the meter binding exceeds the limit. |
仪表绑定的根边界超出限制。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004018 |
Invalid input. property path format is invalid. |
输入无效。属性路径格式无效。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004019 |
Invalid input. the data type corresponding to the property path must be numeric. |
输入无效。属性路径对应的数据类型必须为数字。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004020 |
The meter associated with the device already exists. |
设备关联的电表已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004100 |
The brand is not exist. |
品牌不存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004101 |
The brand is not belong to the product. |
该品牌不属于该产品。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004102 |
The brand is already exist. |
该品牌已存在。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004103 |
The brand is already associated with device. |
该品牌已关联设备。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004200 |
The IoTDA instance ID is already in use. |
IoTDA实例ID已被使用。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004201 |
The IoTDA authentication information is not configured. |
未配置IoTDA鉴权信息。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004202 |
The configuration information for creating the IoTDA instance is not configured. |
未配置创建IoTDA实例的配置信息。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004203 |
The IoTDA instance information for creating is not configured. |
未配置用于创建的IoTDA实例信息。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004204 |
Failed to create the IoTDA instance. |
创建IoTDA实例失败。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004205 |
Failed to obtain the token of iamlite when creating an instance. |
创建实例时获取iamlite的token失败。 |
请排查请求参数是否正确。 |
400 |
IoTFM.004206 |
Failed to create the instance in iotfm. |
在iotfm中创建实例失败。 |
请排查请求参数是否正确。 |
400 |
IoTEdge.00000012 |
Failed to invoke the third-party system. |
调用第三方系统失败。 |
请确认http请求参数中,方法是否正确。 |
400 |
IoTEdge.00000013 |
Failed to invoke the third-party system. |
调用第三方系统失败。 |
请确认http请求参数中,方法是否正确。 |
400 |
IoTEdge.02101804 |
The data table is not defined in the data collection. |
数据表未在数据采集中定义。 |
请在数据采集中定义数据表。 |
400 |
IoTEdge.02101805 |
The data source has been defined in Data Collection. |
数据源已在数据采集中定义。 |
请更换数据源后重试。 |
400 |
IoTEdge.02101806 |
The data source is not defined in the data collection. |
数据源未在数据采集中定义。 |
请在数据采集中定义数据源。 |
400 |
IoTEdge.02101807 |
The number of data sources in the current module reaches the upper limit. |
数据源数目在当前模块中达到上限。 |
请排查数据源数目是否正确。 |
400 |
IoTEdge.02101808 |
The point has been defined in the data source under the current node. |
点位已在当前节点下数据源中定义。 |
请更换点位后重试。 |
400 |
IoTEdge.02101809 |
The point is not defined in the data source under the current node. |
点位未在当前节点下数据源中定义。 |
请排查当前节点下数据源中定义的点位是否正确。 |
400 |
IoTEdge.02101810 |
The number of data sources on the current node has reached the upper limit. |
数据源数目在当前节点下数据源中达到上限。 |
请排查当前节点下数据源数目是否正确。 |
400 |
IoTEdge.02101811 |
The template already exists. |
模板已存在。 |
请更换模板后重试。 |
404 |
IoTEdge.02101812 |
The template does not exist. |
模板不存在。 |
请排查请求参数中模板是否正确。 |
400 |
IoTEdge.02101813 |
The data source configuration parameter is invalid. |
数据源配置参数不合法。 |
请排查请求参数中数据源配置参数是否正确。 |
400 |
IoTEdge.02101814 |
The template parameter is invalid. |
模板参数不合法。 |
请排查请求参数是否正确。 |
400 |
IoTEdge.02101815 |
The template is already in use. |
该模板已被使用。 |
请更换模板后重试。 |
400 |
IoTEdge.02101816 |
The point configuration parameter is invalid. |
点位配置参数不合法。 |
请排查请求参数中点位配置参数是否正确。 |
400 |
IoTEdge.02101817 |
The number of imported points has reached the upper limit. |
当前导入点位数达到上限。 |
请排查请求参数中导入点位数是否正确。 |
400 |
IoTEdge.02101818 |
Duplicate points exist in the import. |
本次导入存在重复点位。 |
请排查请求参数中导入点位是否存在重复点位。 |
400 |
IoTEdge.02101820 |
The device ID and attribute in the point mapping are duplicate. |
点位映射中设备标识和属性重复。 |
请排查请求参数中点位映射是否存在重复属性。 |
403 |
IoTEdge.02101821 |
The driver does not support data source creation. |
该驱动不支持创建数据源。 |
请联系设施云工程师分析解决。 |
400 |
IoTEdge.02101823 |
The number of applications integrated with the local subsystem has reached the upper limit. |
本地子系统集成应用已达到上限。 |
请排查本地子系统集成应用数目是否正确。 |
400 |
IoTEdge.02101902 |
System exception error. |
系统例外错误。 |
请排查请求是否正确。 |
400 |
IoTEdge.02102100 |
The data source ID is required for creating a batch task for importing points. |
创建导入点位的批量任务需要携带数据源ID。 |
请排查请求参数是否正确 |
400 |
IoTEdge.02102101 |
The batch task name has been used. |
批量任务名称已被使用。 |
请更换批量任务名称后重试。 |
400 |
IoTEdge.02102102 |
The number of unfinished batch tasks has reached the upper limit. |
未完成的批量任务数量已达上限。 |
请排查未完成的批量任务数量。 |
400 |
IoTEdge.02102103 |
The number of batch tasks has reached the upper limit. |
批量任务数量已达上限。 |
请排查批量任务数量。 |
400 |
IoTEdge.02102104 |
The batch task does not exist. |
批量任务不存在。 |
请排查请求参数中中批量任务是否正确。 |
400 |
IoTEdge.02102105 |
The batch task is not complete and cannot be exported. |
批量任务未执行完成,禁止导出。 |
请等待批量任务执行完成后重试。 |
400 |
IoTEdge.02102106 |
Unfinished bulk tasks cannot be deleted. |
未完成的批量任务不允许删除。 |
请等待批量任务执行完成后重试。 |
400 |
IoTEdge.02102107 |
Cannot create a batch task because the batch task is not complete. |
批量任务未执行完成,禁止创建新任务。 |
请等待批量任务执行完成后重试。 |
400 |
IoTEdge.02102109 |
The batch device creation file to be imported is invalid. |
本次导入的批量设备创建文件不合法。 |
请排查请求参数中导入的文件是否正确。 |
400 |
IoTEdge.02102001 |
The instance does not exist. |
实例不存在。 |
请排查请求参数中实例是否正确。 |
400 |
IoTEdge.02102002 |
The edge node has been bound. |
边缘节点已绑定 |
请更换边缘节点后重试。 |
400 |
IoTEdge.02102003 |
Professional resources have not been purchased. |
尚未购买专业资源。 |
请购买专业资源后重试。 |
400 |
IoTEdge.02102004 |
The node data collection resource has expired. |
节点数据采集资源已过期。 |
请重新采集资源后重试。 |
400 |
IoTEdge.02102005 |
The point data collection implementation information cannot be changed. |
节点数据采集实施信息不可更改。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02102006 |
The resource is not bound to a node. |
资源未绑定到节点。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02102007 |
The resource cannot be bound to the node. |
资源无法绑定到节点。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100201 |
The edge module does not exist. |
边缘模块不存在。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100202 |
The edge node is not installed. |
边缘节点未安装。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100203 |
The system module does not allow to operate. |
该边缘模块为系统模块,禁止操作。 |
请排查请求是否正确。 |
400 |
IoTEdge.02100205 |
The module has already been binded. |
该边缘节点已绑定。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100206 |
The verification code is incorrect. |
验证码不对。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100210 |
The app has been installed. |
该应用已安装。 |
请排查请求是否正确。 |
400 |
IoTEdge.02100211 |
The app does not support this node's architecture. |
该应用不支持此边缘节点的架构。 |
请选择与边缘节点架构相匹配的应用进行重试 |
400 |
IoTEdge.02100212 |
The module ID or key is incorrect. |
模块ID或密钥不正确。 |
请排查请求中的参数模块ID或密钥是否携带正确。 |
400 |
IoTEdge.02100216 |
Operation not allowed. The process module does not allow to install in advanced node. |
高级版边缘节点不支持以进程方式部署的边缘模块。 |
请选择标准版边缘节点进行重试。 |
400 |
IoTEdge.02100217 |
The deployment type does not match. |
部署类型不匹配。 |
请排查请求中的参数部署类型是否携带正确 |
400 |
IoTEdge.02100218 |
The application has been installed and does not support multiple instances of a single application. |
该应用已安装,且该应用版本不支持单应用多实例部署。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100219 |
The application uses port mapping, and the host port settings conflict. |
该应用使用端口映射,主机端口设置冲突。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100220 |
This module does not allow you to modify container settings. |
该模块不允许修改容器设置。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100221 |
The NPU management plug-in application $edge_npu_plugin is not deployed or is not running properly. |
NPU管理插件应用$edge_npu_plugin未部署或者未正常运行。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100301 |
The edge node has already existed. |
边缘节点已存在。 |
请尝试更换其他名称进行重试。 |
400 |
IoTEdge.02100303 |
Failed to create edge node from IEF. |
通过IEF创建边缘节点失败。 |
请联系IEF云服务工程师分析解决。 |
400 |
IoTEdge.02100304 |
The edge node contains sub devices. |
边缘节点包含子设备。 |
请删除该边缘节点的子设备后进行重试。 |
404 |
IoTEdge.02100305 |
The edge node does not exist. |
边缘节点不存在。 |
请检查边缘节点ID携带是否正确。 |
400 |
IoTEdge.02100307 |
Failed to delete edge node from IEF. |
通过IEF删除边缘节点失败。 |
请联系IEF云服务工程师分析解决。 |
400 |
IoTEdge.02100308 |
The current number of edge nodes reaches the upper limit. |
IEF当前部署的边缘节点数量达到上限。 |
请删除无用的节点后进行重试。 |
400 |
IoTEdge.02100316 |
The resource package has been used. |
该资源包已被使用。 |
请尝试更换其他资源包进行重试。 |
400 |
IoTEdge.02100318 |
The resource package of this type has already existed. |
该类型的资源包已存在。 |
请尝试其他类型的资源包。 |
400 |
IoTEdge.02100319 |
The edge node does not running. |
该边缘节点尚未运行。 |
请安装边缘节点后重试。 |
400 |
IoTEdge.02100320 |
The edge node fails to be updated through IEF. |
通过IEF更新边缘节点失败。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100321 |
HUB_OR_AGENT_IS_INCOMPATIBLE |
agent或hub的版本与daemon不兼容。 |
请先升级agent和hub后再尝试。 |
400 |
IoTEdge.02100322 |
Nodes of the advanced edition do not support active/standby configuration modification. Check the deployment type of the edge node. |
高级版节点不支持修改主备配置,请排查边缘节点部署类型。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100323 |
The slave node has been installed and is running. Check whether the slave node has been installed. |
从节点已经安装并且正在运行,请排查是否已经安装了从节点。 |
请排查是否已经安装了从节点 |
400 |
IoTEdge.02100324 |
HA information is not configured. Check whether HA parameters have been configured. |
高可用信息未配置,请排查是否已经配置HA相关参数。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100325 |
The $edge_keepalive module is not deployed on the edge node. |
边缘节点未部署$edge_keepalive模块。 |
请排查边缘节点是否部署$edge_keepalive模块。 |
400 |
IoTEdge.02100326 |
The edge node is not offline. Therefore, you are not allowed to obtain the reinstallation command. |
该边缘节点尚未离线,所以不允许获取重新安装命令。 |
请让该边缘节点离线后重试。 |
400 |
IoTEdge.02100327 |
You are not allowed to obtain the reinstallation command because HA information has been configured for the node. |
节点已配置高可用信息,不允许获取重新安装命令。 |
请排查节点配置。 |
400 |
IoTEdge.02100328 |
The offline cache capacity of the edge node exceeds the upper limit. |
边缘节点的离线缓存容量设置值超过上限。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100329 |
The offline cache period of the edge node exceeds the upper limit. |
边缘节点的离线缓存周期设置值超过上限。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100333 |
The active node is offline, and the installation command of the standby node cannot be obtained. |
主节点离线,不允许获取备节点安装命令。 |
请排查主节点是否离线。 |
400 |
IoTEdge.02100334 |
The device password and verification code cannot be set in active/standby mode. |
主备模式下不允许设置设备密码和验证码。 |
主备模式下不允许设置设备密码和验证码。 |
400 |
IoTEdge.02100335 |
The active node has been installed and is running. |
主节点已经安装并且正在运行。 |
主节点已经安装并且正在运行。 |
400 |
IoTEdge.02100336 |
The node is not equipped with a AI acceleration card. Modules using NPU devices cannot be deployed. |
该节点未搭载AI加速卡,不能部署使用NPU设备的模块。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100337 |
The node does not have sufficient NPU resources. |
节点无足够的npu资源。 |
请排查当前节点是否有足够的npu资源。 |
400 |
IoTEdge.02100501 |
Unable to get a response from another service. |
无法从其他服务获取响应。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100502 |
The response of other services is empty. |
其他服务的响应为空。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100503 |
The status line of other service responses is null. |
其他服务响应的状态行为空。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100504 |
Failed to parse other service response entities as Strings. |
将其他服务响应实体解析为String失败。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100505 |
The response codes of other services are abnormal. |
其他服务的响应码异常。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100506 |
The body content of the response from another service could not be parsed. |
无法解析其他服务响应的正文内容。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100601 |
The app has already existed. |
应用已存在。 |
请尝试更换其他名称进行重试。 |
403 |
IoTEdge.02100602 |
The system app can not be operated. |
系统应用不允许操作。 |
系统应用不允许操作。 |
400 |
IoTEdge.02100603 |
The app contains software package version. |
该应用下面存在应用软件包版本。 |
请删除所有该应用的应用软件包版本后重试。 |
404 |
IoTEdge.02100604 |
The app software package version does not existed. |
应用软件包版本不存在。 |
请排查请求中的参数是否携带正确。 |
403 |
IoTEdge.02100605 |
The app software package version has already published. |
应用软件包版本已发布,禁止操作。 |
请下线该应用软件包版本后进行重试。 |
403 |
IoTEdge.02100606 |
The app software package version has not publish yet. |
应用软件包版本尚未发布,禁止部署。 |
请发布该应用软件包版本后进行重试。 |
403 |
IoTEdge.02100607 |
The app software package version has instances. |
该应用软件包版本存在部署,禁止删除。 |
请卸载对应的部署实例后进行重试。 |
400 |
IoTEdge.02100608 |
The app does not existed. |
应用不存在。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100609 |
The app software package version has already existed. |
应用软件包版本已存在。 |
请尝试更换其他名称进行重试。 |
403 |
IoTEdge.02100614 |
The app software package version has already off shelf. |
应用软件包版本已下线,禁止操作。 |
请发布应用软件包版本后进行重试。 |
400 |
IoTEdge.02100615 |
The dependent application software package is not deployed. |
依赖的应用软件包没有部署。 |
请将依赖的软件包部署完成后重试。 |
400 |
IoTEdge.02100616 |
The version of the dependent application software package does not match. |
依赖的应用软件包版本不匹配。 |
请排查依赖的应用软件包版本是否正确。 |
400 |
IoTEdge.02100617 |
The application software package version is invalid. |
应用软件包版本无效。 |
请排查应用软件包版本是否正确。 |
400 |
IoTEdge.02100618 |
The OT application protocol is empty. |
OT应用协议为空。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100619 |
The SmartLogger template ID of the OT application version is empty. |
OT应用版本数采模板ID为空。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100620 |
The vendor of the OT application protocol is empty. |
OT应用协议产商为空。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100623 |
The number of specified NPU resources is missing. |
缺少指定NPU资源数量。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100624 |
The template for applying for virtual NPU resources does not match the NPU type. |
申请虚拟NPU资源的模板与NPU类型不匹配。 |
请排查请求中的参数是否携带正确。 |
400 |
IoTEdge.02100625 |
The service application cannot contain the protocol type. The driver application must contain the protocol type. |
业务应用不能包含协议类型,驱动应用必须包含协议类型。 |
请排查请求中的参数是否携带正确。 |
404 |
IoTEdge.02100801 |
The edge app version does not existed. |
边缘应用软件包版本不存在。 |
请排查请求中的参数是否携带正确。 |
404 |
IOTDA.014000 |
The device does not exist. |
设备不存在。 |
请排查请求参数中是否有误并确认是否有在平台注册该设备。 |
400 |
IOTDA.014008 |
The device ID already exists. |
设备标识码已存在。 |
请更换nodeId后再重试。 |
400 |
IOTDA.014009 |
The device name already exists. |
设备名称已存在。 |
请更换deviceName后再重试。 |
403 |
IOTDA.014016 |
Operation is not allowed. The device is offline. |
不允许操作。设备未在线。 |
请将设备接入后再重试。 |
400 |
IOTDA.014031 |
The device already exists. |
设备已存在。 |
请更换设备名称后再重试。 |
403 |
IOTDA.001006 |
Operation is not allowed. The device is offline. |
不允许操作。设备未在线。 |
请将设备接入后再重试。 |
400 |
IOTDA.001007 |
The user does not have an application or the application does not match the user. |
用户下没有应用或应用与用户不匹配。 |
请排查该用户下是否有指定的资源空间。 |
404 |
IOTDA.013000 |
The product does not exist. |
产品不存在。 |
请排查该请求参数中产品是否存在。 |
400 |
IOTDA.013005 |
The product name is already in use in the same application |
产品名称已在同一应用程序中使用。 |
请更换产品名称后重试。 |
404 |
IOTDA.013014 |
The product does not exist. |
产品不存在。 |
请排查该请求参数中产品是否存在。 |
403 |
IOTDA.014024 |
The device contains subdevices. Delete the subdevices and try again. |
该设备含有子设备,请删除子设备后重试。 |
删除网关前,必须删除其关联的子设备,如需删除,请确保子设备无用或关联至其他网关,再重试网关删除操作。 |