ECS Metrics Under OS Monitoring (Agent Installed)
Prerequisites
The Agent has been installed and is running properly.
Function
This topic describes OS metrics reported by the ECS plug-in to Cloud Eye as well as their namespaces and dimensions. You can use APIs provided by Cloud Eye to query the metrics and alarms generated by the ECS plug-in.
Namespace
AGT.ECS
Metrics
|
Metric |
Name |
Description |
Collection Mode (Linux) |
Collection Mode (Windows) |
|---|---|---|---|---|
|
cpu_usage_idle |
(Agent) Idle CPU Usage |
Percentage of time that CPU is idle Unit: Percent |
Monitored object: ECS Check the metric value changes in file /proc/stat in a collection period. Run the top command to check the %Cpu(s) id value. |
Monitored object: ECS Obtain its value by invoking WindowsAPI GetSystemTimes. |
|
cpu_usage_other |
(Agent) Other Process CPU Usage |
Percentage of time that the CPU is used by other processes Unit: Percent |
Monitored object: ECS Other Process CPU Usage = 1- Idle CPU Usage - Kernel Space CPU Usage - User Space CPU Usage |
Monitored object: ECS Other Process CPU Usage = 1- Idle CPU Usage - Kernel Space CPU Usage - User Space CPU Usage |
|
cpu_usage_system |
(Agent) Kernel Space CPU Usage |
Percentage of time that the CPU is used by kernel space Unit: Percent |
Monitored object: ECS Check the metric value changes in file /proc/stat in a collection period. Run the top command to check the %Cpu(s) sy value. |
Monitored object: ECS Obtain its value by invoking WindowsAPI GetSystemTimes. |
|
cpu_usage_user |
(Agent) User Space CPU Usage |
Percentage of time that the CPU is used by user space Unit: Percent |
Monitored object: ECS Check the metric value changes in file /proc/stat in a collection period. Run the top command to check the %Cpu(s) us value. |
Monitored object: ECS Obtain its value by invoking WindowsAPI GetSystemTimes. |
|
cpu_usage |
(Agent) CPU Usage |
CPU usage of the monitored object Unit: Percent |
Monitored object: ECS Check the metric value changes in file /proc/stat in a collection period. Run the top command to check the %Cpu(s) value. |
Monitored object: ECS Obtain its value by invoking WindowsAPI GetSystemTimes. |
|
cpu_usage_nice |
(Agent) Nice Process CPU Usage |
Percentage of time during which the CPU runs in user mode with low-priority processes that can easily be interrupted by higher-priority processes Unit: Percent |
Monitored object: ECS Check the metric value changes in file /proc/stat in a collection period. Run the top command to check the %Cpu(s) ni value. |
Not supported |
|
cpu_usage_iowait |
(Agent) iowait Process CPU Usage |
Percentage of time during which the CPU is waiting for I/O operations to complete Unit: Percent |
Monitored object: ECS Check the metric value changes in file /proc/stat in a collection period. Run the top command to check the %Cpu(s) wa value. |
Not supported |
|
cpu_usage_irq |
(Agent) CPU Interrupt Time |
Percentage of time that the CPU is servicing interrupts Unit: Percent |
Monitored object: ECS Check the metric value changes in file /proc/stat in a collection period. Run the top command to check the %Cpu(s) hi value. |
Not supported |
|
cpu_usage_softirq |
(Agent) CPU Software Interrupt Time |
Percentage of time that the CPU is servicing software interrupts Unit: Percent |
Monitored object: ECS Check the metric value changes in file /proc/stat in a collection period. Run the top command to check the %Cpu(s) si value. |
Not supported |
|
load_average1 |
(Agent) 1-Minute Load Average |
CPU load averaged from the last 1 minute |
Monitored object: ECS Obtain its value by using the load1/ value to divide the number of logical CPUs. Run the top command to check the load1 value in the /proc/loadavg file. |
Not supported |
|
load_average5 |
(Agent) 5-Minute Load Average |
CPU load averaged from the last 5 minutes |
Monitored object: ECS Obtain its value by using the load5/ value to divide the number of logical CPUs. Run the top command to check the load5 value in the /proc/loadavg file. |
Not supported |
|
load_average15 |
(Agent) 15-Minute Load Average |
CPU load averaged from the last 15 minutes |
Monitored object: ECS Obtain its value by using the load15/ value to divide the number of logical CPUs. Run the top command to check the load15 value in the /proc/loadavg file. |
Not supported |
|
mem_available |
(Agent) Available Memory |
Available memory size of the monitored object Unit: GB |
Monitored object: ECS Obtain the MemAvailable value by checking file /proc/meminfo. If it is not displayed in the file, MemAvailable = MemFree + Buffers+Cached |
Monitored object: ECS Available Memory = Total memory - Used memory. Obtain its value by invoking WindowsAPI GlobalMemoryStatusEx. |
|
mem_usedPercent |
(Agent) Memory Usage |
Memory usage of the monitored object Unit: Percent |
Monitored object: ECS Check file /proc/meminfo. AGT. Memory Usage = (MemTotal-MemAvailable)/MemTotal |
Monitored object: ECS Memory Usage = Used memory/Total memory *100% |
|
mem_free |
(Agent) Idle Memory |
Amount of memory that is not being used Unit: GB |
Monitored object: ECS Obtain its value by checking file /proc/meminfo. |
Not supported |
|
mem_buffers |
(Agent) Buffer |
Memory that is being used for buffers Unit: GB |
Monitored object: ECS Obtain its value by checking file /proc/meminfo. Run the top command to check the KiB Mem:buffers value. |
Not supported |
|
mem_cached |
(Agent) Cache |
Memory that is being used for file caches Unit: GB |
Monitored object: ECS Obtain its value by checking file /proc/meminfo. Run the top command to check the KiB Swap:cached Mem value. |
Not supported |
|
mountPointPrefix_disk_free |
(Agent) Available Disk Space |
Available disk space of the monitored object Unit: GB |
Monitored object: ECS mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). Run the df -h command to check data in the Avail column. |
Monitored object: ECS Use the WMI interface to invoke GetDiskFreeSpaceExW to obtain disk space data. mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
|
mountPointPrefix_disk_total |
(Agent) Disk Storage Capacity |
Disk storage capacity of the monitored object Unit: GB |
Monitored object: ECS mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). Run the df -h command to check data in the Size column. |
Monitored object: ECS Use the WMI interface to invoke GetDiskFreeSpaceExW to obtain disk space data. mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
|
mountPointPrefix_disk_used |
(Agent) Used Disk Space |
Used disk space of the monitored object Unit: GB |
Monitored object: ECS mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). Run the df -h command to check data in the Used column. |
Monitored object: ECS Use the WMI interface to invoke GetDiskFreeSpaceExW to obtain disk space data. mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
|
mountPointPrefix_disk_usedPercent |
(Agent) Disk I/O Usage |
Disk usage of the monitored object Unit: Percent |
Monitored object: ECS mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). AGT. Disk Usage = AGT. Used Disk Space/AGT. Disk Storage Capacity |
Monitored object: ECS Use the WMI interface to invoke GetDiskFreeSpaceExW to obtain disk space data. mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
|
disk_queue_length |
(Agent) Disk Queue Length |
Average number of read or write requests queued up for completion for the monitored disk in the monitoring period Unit: Count |
Monitored object: ECS The average disk queue length is calculated by calculating the data changes in the fourteenth column of the corresponding device in file /proc/diskstats in a collection period. The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
Not supported |
|
disk_write_bytes_per_operation |
(Agent) Average Disk Write Size |
Average number of bytes in an I/O write for the monitored disk in the monitoring period Unit: KB/op |
Monitored object: ECS The average disk write size is calculated by using the data changes in the tenth column of the corresponding device to divide that of the eighth column in file /proc/diskstats in a collection period. The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
|
|
disk_read_bytes_per_operation |
(Agent) Average Disk Read Size |
Average number of bytes in an I/O read for the monitored disk in the monitoring period Unit: KB/op |
Monitored object: ECS The average disk read size is calculated by using the data changes in the sixth column of the corresponding device to divide that of the fourth column in file /proc/diskstats in a collection period. The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
|
|
disk_io_svctm |
(Agent) Disk I/O Service Time |
Average time in an I/O read or write for the monitored disk in the monitoring period Unit: ms/op |
Monitored object: ECS The average disk I/O service time is calculated by using the data changes in the thirteenth column of the corresponding device to divide the sum of data changes in the fourth and eighth columns in file /proc/diskstats in a collection period. The path of the mount point prefix cannot exceed 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
|
|
disk_inodesTotal |
(Agent) Disk inode Total |
Total number of index nodes on the disk |
Monitored object: ECS mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). Run the df -i command to check data in the Inodes column. |
Not supported |
|
disk_inodesUsed |
(Agent) Total inode Used |
Number of used index nodes on the disk |
Monitored object: ECS mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). Run the df -i command to check data in the IUsed column. |
Not supported |
|
mountPointPrefix_disk_inodesUsedPercent |
(Agent) Percentage of Total inode Used |
Ratio of used index nodes to the total index nodes on the disk Unit: Percent |
Monitored object: ECS mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). Run the df -i command to check data in the IUse% column. |
Not supported |
|
mountPointPrefix_disk_agt_read_bytes_rate |
(Agent) Disks Read Rate |
Number of bytes read from the monitored object per second Unit: byte/s |
Monitored object: ECS The disks read rate is calculated by calculating the data changes in the sixth column of the corresponding device in file /proc/diskstats in a collection period. mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
Monitored object: ECS Use the Win32_PerfFormattedData_PerfDisk_LogicalDisk object in WMI to obtain the disk I/O data. mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
|
mountPointPrefix_disk_agt_read_requests_rate |
(Agent) Disks Read Requests |
Number of read requests sent to the monitored object per second Unit: Request/s |
Monitored object: ECS The disks read requests are calculated by calculating the data changes in the fourth column of the corresponding device in file /proc/diskstats in a collection period. mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
Monitored object: ECS Use the Win32_PerfFormattedData_PerfDisk_LogicalDisk object in WMI to obtain the disk I/O data. mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
|
mountPointPrefix_disk_agt_write_bytes_rate |
(Agent) Disks Write Rate |
Number of bytes written to the monitored disk per second Unit: byte/s |
Monitored object: ECS The disks write rate is calculated by calculating the data changes in the tenth column of the corresponding device in file /proc/diskstats in a collection period. mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
Monitored object: ECS Use the Win32_PerfFormattedData_PerfDisk_LogicalDisk object in WMI to obtain the disk I/O data. mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
|
mountPointPrefix_disk_agt_write_requests_rate |
(Agent) Disks Write Requests |
Number of write requests sent to the monitored disk per second Unit: Request/s |
Monitored object: ECS The disks write requests are calculated by calculating the data changes in the eighth column of the corresponding device in file /proc/diskstats in a collection period. mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
Monitored object: ECS Use the Win32_PerfFormattedData_PerfDisk_LogicalDisk object in WMI to obtain the disk I/O data. mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
|
disk_readTime |
(Agent) Average Read Request Time |
Average amount of time that read requests have waited on the disks Unit: ms/count |
Monitored object: ECS The average read request time is calculated by calculating the data changes in the seventh column of the corresponding device in file /proc/diskstats in a collection period. |
Monitored object: ECS Use the Win32_PerfFormattedData_PerfDisk_LogicalDisk object in WMI to obtain the disk I/O data. mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
|
disk_writeTime |
(Agent) Average Write Request Time |
Average amount of time that write requests have waited on the disks Unit: ms/count |
Monitored object: ECS The average write request time is calculated by calculating the data changes in the eleventh column of the corresponding device in file /proc/diskstats in a collection period. |
Monitored object: ECS Use the Win32_PerfFormattedData_PerfDisk_LogicalDisk object in WMI to obtain the disk I/O data. mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
|
mountPointPrefix_disk_ioUtils |
(Agent) Disk I/O Usage |
Percentage of the time that the disk has had I/O requests queued to the total disk operation time Unit: Percent |
Monitored object: ECS The disk I/O usage is obtained by calculating the data changes in the thirteenth column of the corresponding device in file /proc/diskstats in a collection period. |
Monitored object: ECS Use the Win32_PerfFormattedData_PerfDisk_LogicalDisk object in WMI to obtain the disk I/O data. mountPointPrefix is the prefix of the mount point. / in the path is replaced by the word SlAsH. The new path can contain a maximum of 64 characters. It must start with a letter, and contain only digits, letters, hyphens (-), periods (.), and swung dashes (~). |
|
disk_fs_rwstate |
(Agent) File System Read/Write Status |
Read and write status of the mounted file system of the monitored object Possible statuses are 0 (read and write) and 1 (read only). |
Monitored object: ECS Check file system information in the fourth column in file /proc/mounts. |
Not supported |
|
net_bitSent |
(Agent) Inbound Bandwidth |
Number of bits sent by this NIC per second Unit: bit/s |
Monitored object: ECS Check the metric value changes in file /proc/net/dev in a collection period. |
Monitored object: ECS Use the MibIfRow object in WMI to obtain the network metric data. |
|
net_bitRecv |
(Agent) Outbound Bandwidth |
Number of bits received by this NIC per second Unit: bit/s |
||
|
net_packetRecv |
(Agent) NIC Packet Receive Rate |
Number of packets received by this NIC per second Unit: Count/s |
||
|
net_packetSent |
(Agent) NIC Packet Send Rate |
Number of packets sent by this NIC per second Unit: Count/s |
||
|
net_tcp_total |
(Agent) TCP TOTAL |
Total number of TCP connections of the target NIC |
||
|
net_tcp_established |
(Agent) TCP ESTABLISHED |
Number of ESTABLISHED TCP connections of the target NIC |
||
|
net_errin |
(Agent) Receive Error Rate |
Percentage of receive errors detected by this NIC per second Unit: Percent |
Monitored object: ECS Check the metric value changes in file /proc/net/dev in a collection period. |
Not supported |
|
net_errout |
(Agent) Transmit Error Rate |
Percentage of transmit errors detected by this NIC per second Unit: Percent |
||
|
net_dropin |
(Agent) Received Packet Drop Rate |
Percentage of packets discarded by this NIC to the total number of packets received by the NIC per second Unit: Percent |
||
|
net_dropout |
(Agent) Transmitted Packet Drop Rate |
Percentage of packets transmitted by this NIC which were dropped per second Unit: Percent |
Dimension
|
Key |
Value |
|---|---|
|
instance_id |
ECS ID |
Feedback
Was this page helpful?
Provide feedbackThank you very much for your feedback. We will continue working to improve the documentation.See the reply and handling status in My Cloud VOC.
For any further questions, feel free to contact us through the chatbot.
Chatbot
