错误码说明 v2.0
背景信息
- 接口返回的错误码与Error Message不具有一一对应关系，表中只是列出比较常见的一种或几种Error Message。
- 本服务接口以异步接口居多，有的错误码是在查询任务的返回体中体现的，http状态码有可能不是很准确。
- 本服务对网络、存储等服务具有强依赖性，Error Message显示依赖服务的错误消息时，处理措施需要联系技术支持。
错误码说明
|
模块 |
http状态码 |
错误码 |
错误说明 |
Error Message |
处理措施 |
|---|---|---|---|---|---|
|
公共 |
400 |
VPC.0002 |
可用区为空 |
Availability zone Name is null. |
请确认创建子网的请求体中availability_zone字段是否为空 |
|
404 |
VPC.0003 |
VPC不存在 |
VPC does not exit. |
请确认VPC的id是否填写正确或该租户下是否确实存在该VPC |
|
|
400 |
VPC.0004 |
VPC状态异常 |
VPC does not active，please try later. |
请稍后重试或联系技术支持 |
|
|
400 |
VPC.0007 |
tenantID不一致 |
urlTenantId is not equal tokenTenantId |
url里的tenant_id和token中解析到的tenant_id不一致 |
|
|
401 |
VPC.0008 |
token非法 |
Invalid token in the header. |
请确认请求头中的token是否合法 |
|
|
401 |
VPC.0009 |
实名认证失败 |
real-name authentication failed. |
请联系技术支持 |
|
|
403 |
VPC.2701 |
无权操作，或账户余额不足 |
Token not allowed to do this action. |
请确认账户是否余额不足或被冻结 |
|
|
403 |
VPC.0010 |
调用底层权限不足 |
Rules on xx by ** disallowed by policy |
请赋予正确的细粒度权限 |
|
|
403 |
VPC.2201 |
细粒度权限不足 |
Policy does not allow <x:x:x> to be performed |
请赋予正确的细粒度权限 |
|
|
400 |
VPC.0014 |
企业项目不可用 |
This enterpriseProject status is disabled. |
更换其他可用企业项目id |
|
|
400 |
VPC.0011 |
企业项目id非法 |
EnterpriseProjectId is invalid |
输入合法的企业项目id |
|
|
400 |
VPC.2048 |
时间戳不合法 |
Invalid value for created_at %(timestamp)s. |
请检查输入的时间格式是否正确 |
|
|
400 |
VPC.2002 |
请求参数不合法 |
Invalid parameters. |
请检查输入的参数是否正确 |
|
|
400 |
VPC.2010 |
默认路由已存在 |
The router %(router_id)s has default route. |
路由器下已存在默认路由，请先删除默认路由再创建NAT网关 |
|
|
400 |
VPC.2011 |
Router不存在 |
The router %(router_id)s does not exist. |
路由器不存在，请检查输入的路由器是否正确 |
|
|
400 |
VPC.2009 |
Network不存在 |
Network %(network_id)s does not exist. |
子网不存在，请输入合法的子网 |
|
|
400 |
VPC.2016 |
规则还没有被删除 |
Rule has not been deleted. |
请联系技术支持 |
|
|
400 |
VPC.2049 |
数据库异常 |
DB Error |
请联系技术支持 |
|
|
400 |
VPC.2013 |
子网没有连接到虚拟路由器 |
Router %(router)s has no port for subnet %(subnet)s. |
请将子网添加到路由器接口 |
|
|
400 |
VPC.2019 |
资源被占用 |
Resource %(res_type)s %(res)s is used by %(user_type)s %(user)s |
请联系技术支持 |
|
|
400 |
VPC.2008 |
Network下没有Subnet |
Network %(network)s does not contain any IPv4 subnet |
请联系技术支持 |
|
|
400 |
VPC.2012 |
VPC下已存在nat网关 |
The router %(router_id)s already has nat gateway. |
VPC下已存在nat网关，请选择其他VPC |
|
|
NatGateway |
400 |
VPC.2000 |
Nat网关请求错误 |
Lack of user authority. //request is null. //endpoint is empty. // resource type is invalid. //create natgateway request is null. //update natgateway request is null |
请联系技术支持 |
|
400 |
VPC.2030 |
系统繁忙，请稍后再试 |
The system is busy. Please try again later. |
系统繁忙，请稍后再试 |
|
|
400 |
VPC.2001 |
Nat网关参数错误 |
Request is invalid. //NatGateway id invalid. // the enterprise project id is unsupported. // the enterprise project id in request is invalid. //parameter is null. // tags is invalid. // get natgateways error limit is invalid. //get natgateways error marker is invalid. //Only admin user can do this action. //Parameters are invalid, check them and try. |
请确认输入的参数是否正确或联系技术支持 |
|
|
400 |
VPC.2004 |
Nat网关未处于激活状态 |
NatGateway %(nat_gateway_id)s is not ACTIVE. |
请确认网关状态，如果长时间处于非“运行”状态，请联系技术支持 |
|
|
400 |
VPC.2005 |
Nat网关未处于UP状态 |
NatGateway %(nat_gateway_id)s is not UP. |
网关可能因为欠费等原因被冻结 |
|
|
400 |
VPC.2006 |
Nat网关处于冻结状态 |
NatGateway %(nat_gateway_id)s is frozen.cannot update |
网关可能因为欠费等原因被冻结，不允许进行更新操作 |
|
|
400 |
VPC.2007 |
Nat网关不存在 |
NatGateway %(nat_gateway_id)s does not exist. |
NAT网关不存在 |
|
|
400 |
VPC.2050 |
Nat网关并发操作冲突 |
Concurrent conflict requests found |
请联系技术支持 |
|
|
400 |
VPC.2051 |
Nat网关内部端口创建失败 |
Create NG Port failed. |
NAT网关内部错误，请联系技术支持 |
|
|
400 |
VPC.2052 |
Nat网关内部端口未绑定 |
NG Port %(port)s is unbound. |
NAT网关内部错误，请联系技术支持 |
|
|
400 |
VPC.2053 |
Nat网关不支持IPv6 |
NatGateway does not support IPv6. |
NAT网关不支持绑定IPv6类型的弹性公网IP |
|
|
400 |
VPC.2045 |
选择网关节点错误 |
Get Nat gateway host failed |
请联系技术支持 |
|
|
400 |
VPC.2046 |
获取网关节点的IP错误 |
Get Nat gateway agent local_ip failed |
请联系技术支持 |
|
|
400 |
VPC.2047 |
获取VPC路由表错误 |
Get RouteTable %(router_id)s failed. |
请联系技术支持 |
|
|
400 |
VPC.2012 |
VPC下已存在nat网关，请选择其他VPC |
The router %(router_id)s already has nat gateway. |
请重新选择未绑定nat网关的router |
|
|
SnatRule |
400 |
VPC.2014 |
Snat规则参数错误 |
Endpoint is null or empty. //Endpoint is Invalid. //Request is null. //natGatewayId is invalid. //SnatRule id invalid. //NatGatewayId is invalid. //Invalid value for public ip id. //Endpoint is null. //request is null. //Query SnatRules list error marker is invalid. |
请确认输入的参数是否正确或联系技术支持 |
|
400 |
VPC.2031 |
Snat规则cidr和network冲突 |
Either network_id or cidr must be specified.Both cannot be specified at the same time |
请配置SNAT规则时不要同时指定Cidr和Network_id字段 |
|
|
400 |
VPC.2032 |
Snat规则cidr不合法 |
cidr is invalid, make sure its format is correct. |
请输入合法的CIDR，例如192.168.0.0/24 |
|
|
400 |
VPC.2033 |
Snat规则类型不合法 |
source_type and network_id is incompatible. |
如果为VPC配置SNAT规则，Source_Type可不携带，如果携带，必须为0； 如果为专线侧配置SNAT规则，Source_type必须为1 |
|
|
400 |
VPC.2034 |
VPC侧snat规则中的cidr必须是子网网段的子集 |
cidr must be a subset of subnet's cidr. |
如果为VPC配置SNAT规则，CIDR必须是子网的子集。例如：子网为192.168.0.0/24,CIDR可填写192.168.0.0/25 |
|
|
400 |
VPC.2035 |
Snat规则cidr与子网网段冲突 |
cidr conflicts with subnet's cidr. |
如果为专线配置SNAT规则，CIDR不能与VPC的子网冲突。 |
|
|
400 |
VPC.2036 |
Snat网段冲突 |
cidr in the request conflicts with cidrs of existing rules. |
请输入与现有SNAT规则不冲突的CIDR |
|
|
400 |
VPC.2018 |
规则已存在 |
Snat rule for network %(network)s exists. |
请选择一个未配置SNAT规则的子网 |
|
|
400 |
VPC.2042 |
EIP已被Snat规则使用 |
There is a duplicate EIP %(fips)s in SNAT rule. |
该弹性公网IP已被SNAT规则绑定，请重新绑定其他弹性公网IP |
|
|
400 |
VPC.2044 |
Snat规则的公网地址的ID不是合法的UUID |
Invalid input for floating_ip_id. Reason: \'%(fip)s\' is not a valid UUID. |
请输入合法的UUID |
|
|
400 |
VPC.2040 |
Snat规则的公网地址的ID不可以是空串 |
Invalid value for public ip id. |
请输入合法的UUID |
|
|
400 |
VPC.2039 |
关联到SNAT规则的EIP个数超过上限 |
%(limit)s EIP has been associated to this SNAT rules' EIP pool, no more is allowed. |
SNAT规则支持的弹性公网IP已经超过上限。具体限制请参考NAT网关接口。 |
|
|
DnatRule |
400 |
VPC.2020 |
Dnat规则参数错误 |
get dnatRules error limit is invalid. //get dnatrules error marker is invalid. //endpoint is empty. //DnatRule id invalid. //VPC ID is invalid. //Request is null. //DnatRule id invalid. //DnatRule natGatewayId id invalid. |
请确认输入的参数是否正确或联系技术支持 |
|
400 |
VPC.2054 |
Dnat规则协议不合法 |
Dnat rule protocol %(protocol)s not supported.Only protocol values %(values)s and integer representations [6, 17, 0] are supported. |
请配置合法的协议，范围在[6, 17, 0]中，对应TCP/UDP/ANY |
|
|
400 |
VPC.2069 |
Dnat规则端口不合法 |
Invalid value for port %(port)s |
请配置合法的内网端口和外网端口，范围0-65535 |
|
|
400 |
VPC.2023 |
Dnat规则内网信息冲突 |
The port_id, private_ip, internal port and protocol spcified have been occupied. |
请输入与现有DNAT规则不冲突的虚拟机Port ID或私网地址及私网端口。 |
|
|
400 |
VPC.2024 |
Dnat规则外网信息冲突 |
The floating ip, external port and protocol specified have been occupied. |
请输入与现有DNAT规则不冲突的浮动IP的ID、外网端口、协议。 |
|
|
400 |
VPC.2070 |
Dnat规则AllPort类型请求信息错误 |
The external port equals 0 and internal port equals 0 and protocol equals any must satisfied at the same time. |
私网端口和外网端口都为0及协议为any必须同时配置才生效。 |
|
|
400 |
VPC.2027 |
Dnat规则中port_id与已有Dnat规则冲突 |
The port_id already existing dnat allport rules or dnat_rules, can no longer create dnat rules or dnat allport rules. |
虚拟机Port ID与已有dnat规则冲突，请更换虚拟机Port ID创建或更新dnat规则。 |
|
|
400 |
VPC.2028 |
Dnat规则中私网IP与已有Dnat规则冲突 |
The private_ip already existing dnat allport rules or dnat rules, can no longer create dnat rules or dnat allport rules. |
私网地址与已有dnat规则冲突，请更换私网地址创建或更新dnat规则。 |
|
|
400 |
VPC.2029 |
DNAT规则被冻结，无法更新 |
DNAT rule is frozen, can no longer update. |
请检查dnat规则绑定的floating_ip是否处于欠费状态或用户账户是否处于欠费状态 |
|
|
400 |
VPC.2038 |
Dnat规则条数超出规格 |
%(limit)s DNAT rules has been associated to this NAT Gateway, no more is allowed |
同一nat网关的Dnat规则条数超出上限。 |
|
|
400 |
VPC.2055 |
Dnat规则存在互斥参数 |
The port_id and private_ip exist at the same time and value is not empty, but at least one value is empty. |
虚拟机Port ID和私网地址不能同时配置，请确认配置。 |
|
|
400 |
VPC.2056 |
Dnat规则缺少参数 |
The port_id and private_ip values are both empty, at least one value is not empty. |
虚拟机Port ID和私网地址都没有配置，请确认配置。 |
|
|
400 |
VPC.2071 |
Dnat规则私网IP不合法 |
The private ip address is not legal. |
请配置合法的私网地址。 |
|
|
400 |
VPC.2037 |
不支持虚拟IP地址 |
The virtual IP address is not supported. |
私网地址不支持配置为虚拟IP地址，请配置合法的私网地址。 |
|
|
400 |
VPC.2026 |
Dnat规则条数超出规格 |
%(limit)s DNAT rules has been associated to this Floating IP, no more is allowed |
绑定同一浮动IP的Dnat规则条数超出上限。 |
|
|
400 |
VPC.2057 |
批量创建Dnat规则条数超出规格 |
batch create dnat rules max limit: %(limit)s |
批量创建Dnat规则条数超出上限。 |
|
|
400 |
VPC.2022 |
Dnat规则虚拟机Port ID不合法 |
Port %(port)s is not a valid port. |
请配置合法的虚拟机Port ID. |
|
|
400 |
VPC.2058 |
VtepIp参数不能为空 |
Vtep_ip is Null. |
请联系技术支持 |
|
|
400 |
VPC.2075 |
描述字符数超过255个 |
Enter a maximum of 255 characters. |
请检查输入的描述字符个数 |
|
|
EIP |
400 |
VPC.2059 |
EIP处于冻结状态 |
Floating Ip %(fip)s is frozen. |
请重新选择未被冻结的弹性公网IP地址 |
|
400 |
VPC.2060 |
EIP关联限制（已关联到另一个端口） |
Floating Ip %(fip)s has associated with port %(port)s. |
请选择未绑定到其他对象的弹性公网IP地址，例如弹性公网IP地址绑定到了ECS，则不能再绑定到NAT网关 |
|
|
400 |
VPC.2061 |
EIP关联限制（已关联到另一个Nat网关实例） |
Floating Ip %(fip)s has used by nat gateway %(nat_gateway)s. |
弹性公网IP已经绑定到其他NAT网关，请重新选择 |
|
|
400 |
VPC.2062 |
EIP已被占用 |
Floating Ip %(fip)s has been occupied. |
弹性公网IP已经绑定到其他NAT网关，请重新选择 |
|
|
400 |
VPC.2074 |
EIP关联限制(不能同时关联snat和dnat all port) |
Floating Ip %(fip)s cannot be associated with both SNAT rule and DNAT all port rule. |
弹性公网IP不能同时绑定到Snat和Dnat all port规则 |
|
|
400 |
VPC.2073 |
EIP关联限制(不能同时关联dnat和dnat all port) |
Floating Ip %(fip)s cannot be associated with both DNAT rule and DNAT all port rule. |
弹性公网IP不能同时绑定到Dnat和Dnat all port规则 |
|
|
400 |
VPC.2043 |
EIP关联限制(已关联到另一条规则) |
Floating Ip %(fip)s is used by other rules |
弹性公网IP被其他规则使用 |
