ALM-135463092 hwChassisFail

Description

The chassis partially failed. (EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=[EntityTrapFaultID], Reason=[Reason])

A chassis experienced a partial failure.

Attribute

Parameters

Impact on the System

The system may become abnormal.

Possible Causes

• Cause 1: Different SFUs were installed in the same chassis.
• Cause 2: The system power or the power of the backup power supply is insufficient.
• Cause 3: No SFU is present in the chassis.
• Cause 4: No LPU is present in the chassis.
• Cause 5: No CMU is present in the chassis.
• Cause 6: The power module types are inconsistent.
• Cause 7: Failed to obtain slot information of the power supply.
• Cause 8: There is two or more fans not detected.
• Cause 9: The number of detected SFUs does not meet requirements.

Procedure

• Cause 1: Different SFUs were installed in the same chassis.

  1. Insert the correct SFU.

• Cause 2: The system power or the power of the backup power supply is insufficient.

  1. Add a power module.

• Cause 3: No SFU is present in the chassis.

  1. Insert the SFU.

• Cause 4: No LPU is present in the chassis.

  1. Insert the LPU.

• Cause 5: No CMU is present in the chassis.

  1. Insert the CMU.

• Cause 6: The power module types are inconsistent.

  1. Install only DC or AC power modules into all the power slots on the device.

• Cause 7: Failed to obtain slot information of the power supply.

  1. Insert the power module into another slot. If the alarm persists, replace the power module.

• Cause 8: There is two or more fans not detected.

  1. Install all the fan modules.

• Cause 9: The number of detected SFUs does not meet requirements.

  1. Insert the SFU.