ALM-303046698 The card or subcard temperature is too high 143617

Description

SRM_ENTITY/6/ENTITYBRDTEMPALARM:OID 1.3.6.1.4.1.2011.5.25.219.2.10.13 Temperature rise over or fall below the warning alarm threshold. (Index=[integer], EntityPhysicalIndex=[integer], PhysicalName="[STRING]", EntityThresholdType=[integer], EntityThresholdValue=[integer], EntityThresholdCurrent=[integer], EntityTrapFaultID=143617)

The board or subcard temperature was too high.

Attribute

Alarm ID	Alarm Severity	Alarm Type
303046698	Major	equipmentAlarm

Parameters

Name	Meaning
OID	Indicates the MIB object ID of the alarm.
Index	Indicates the index.
EntityPhysicalIndex	Indicates the physical entity index.
EntPhysicalName	Indicates the physical entity name.
EntityType	Indicates the entity type.
EntityTrapFaultID	Indicates the error code.

Impact on the System

The device may be restarted, causing service interruption.

Possible Causes

Cause 1: The board temperature exceeds the upper alert threshold.

Cause 2: The fan is faulty.

Procedure

Run the display device command and check whether the fan status restores normal.
- Y =>2
- N =>3
Lower the ambient temperature, run the display temperature all command, and check whether the board temperature is Normal.
- Y =>4
- N =>3
Collect the information about alarms, logs, and configurations, and then contact Huawei technical support personnel.
End.